HT4341 which of the power adapters can i use in Peru, South America?

Hello:
I'll be travelling down to Peru next month and I need to know which of the power adapters I can use there to charge my laptop. The electricity is 220v in Peru and not 110v like the U.S.

Most Mac equipment these days adapts to 110 Volt 208 Volt or 220 Volt power, 50 or 60 Hz, automatically. For a MacBook, you would need a power cord that ends in the local plug or an adapter from local plug to US standard "parallel two prong, U-ground".
For advice on specific equipment, you would need to post the model, and Readers will try to look it up for you.

Similar Messages

HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

Im using iphone5 but can't open the power what can i do?

i'm using iphone5 but i can't open the power what can i do
i charge almost one hour stell can't open the power

The paucity of details is amazing. Computer, OS, file type, etc. will go a long way in getting a solution.

Which PO and PR table can be used to get the WBS element field.

Which PO and PR table can be used to get the WBS element field. Thanks.

HI,
In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
It shall be checked from EKKO table with PS_POSI feld.
The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

HT2253 I have power mac G5. I have install Mac OS 10.5.8 onto the computer. Can I use Classic OS 9 ?

I have power mac G5. I have install Mac OS 10.5.8 onto the computer. Can I use Classic OS 9 ?

Thanks. It was helpfull for me.

I bought my iMac in Australia in 2007. I've now brought it with me to the USA. Can I use it on us power by simply plugging it in with a travel adaptor?

I bought my iMac in Australia in 2007. I've now brought it with me to the USA. Can I use it on us power by simply plugging it in with a travel adaptor?

Yes!

When i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

when i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
Also it would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7).When System Profiler comes up check the Model Identifier.

Battery power alone can be used to track Android phones

Now our phones can be tracked without GPS can you believe it ?
BBC News - Battery power alone can be used to track Android phones

     I'm trying to do the same thing, and have had limited success with an app called Control Plane. Please understand that I am pretty computer illiterate so this may not be the best way, or even a good way to accomplish this.   http://www.controlplaneapp.com/
     It allows you to automatically toggle bluetooth(and many other aspects) on or off under certain contexts. I tried setting it up to detect the display connection but sometimes it would detect the display, and sometimes it wouldn't. So I set it up to detect the specific power adapter for the display. So when I plug the monitor power adapter in it switches to the context i labeled "monitor" and I set an action to toggle bluetooth on under this context, when I unplug the power adapter it switches to a context I've named "battery" and turns the bluetooth off.
     Automatically turning the bluetooth on is specific to only connecting the monitor power adapter, when other power adapters are connected it does not turn bluetooth on. But it is limited in the fact that if I have bluetooth on in instances other than the monitor connection, and then disconnect any power adapter, it will automatically turn the bluetooth off.
     Also if my computer is in clamshell mode, and therefore asleep, when I plug the monitor+power adapter in it doesn't automatically turn on bluetooth, and I cannot use my bluetooth keyboard or trackpad to wake the computer. This forces me to open the computer momentarily to allow it to wake up and control panel to turn on bluetooth for me.
     Since my main issue was that I didn't want bluetooth on constantly to save battery life, this works for me, but it is not ideal. Ideally connecting the monitor to the computer in clamshell mode would wake it from sleep, but as of now I can't figure out how to make it do that. If you have any suggestions on how to make this process more efficient please let me know. Hope this helped.

Amount in Bar Code is incorrect;Amount in the line item can be used instead

We have a problem in our Brazil company code.
When we have a document with value higher than 5,000.00 BRL it is subject to Pis/cofins tax. In the Boleto (paper) document the amount is after tax deducted. But we see the full amount in the Vendor line item in SAP
When the system reads the bar code and saves this code in the vendor line item during the document change we get a warning message no."8B797: Amount in Bar Code is incorrect;Amount in the line item can be used instead".
And the amount in the Barcode line automatically adjusts itself to the line item amount which is the pre-tax amount (full amount).
Example: Amount in the SAP Invoice doc is R$ 6,268.72
Amount in Boleto (paper) R$ 5,977.22 (after deducting PIS/COFINS) - This amount appears in the bar code but once we press enter after the warning message it automatically adjusts to R$ 6,268.72 .
We tried few notes like 784748 to apply but it says it is obsolete. We are on ECC 6.0 Release level 11.
Regards.,
Raj/

answered through SAP note 784748

I have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

i have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

Hi
You need to find the format of the drive by looking at its info, my guess would be you are currently in NTFS (windows only) mac can use any mac os journaled or non journaled, or you can use fat32 which is usable on both pc and mac but is unable to move files over 4GB so no good for large file transfers. You will need to re format at some point but this will delete everything currently on the drive.
Hope this helps

Irc account keeps disconnecting cannot use IM what is nick at the beginning of the name ..can i use another name ? thank you

hello i am trying to set up instant messaging ....the account keeeps disconnecting after a few seconds and i cannot make it work
it keeps saying nick ... what is nick at the beginning of the name ..can i use another name ?
if i use mozilla for IRC what is the server name ?
what other details do i need to type in ?
Thunderbird is running on a single home PC which only has Open Suse 13.1 x64 linux on it ( no Windows )
thank you

'nick' is your nickname which you entered when you set up the IRC chat. You can register your nickname by entering "/msg nickserv register <password> <email address>"
Then when you start next time enter "/msg nickserv identify <password>"
You can get a list of nickserv commands by entering "/msg nickserv help"

Can you replace existing images in Captivate 7 the way you can when using InDesign?

Can you replace existing images in Captivate 7 the way you can when using InDesign? I need to replace some images but wondering if I'll need to reformat, resize, rename for the Advanced Action, etc.

The work flow is a bit more complicated than in InDesign (keeps only a link to the image as you know in the frame). I understand the problem with the advanced/shared action references. This is my work flow, maybe someone else has an easier, shorter one:
Right-click on the image and use 'Find in Library' or use CTRL-ALT-F if it works on your keyboard (doesn't on my AZERTY one)
In the Library use the right-click menu to open the Properties or double-click the name of the image
In that dialog box, choose 'Import' and choose your new image; for some reason you cannot choose from the Library however, which I find really sad because I'm used to import all assets to the Library.
Drawback: if the new image has not the same width/height ratio, it will adapt to the original size of the image, you can use Edit image to repair. You'll keep the name of the image, you don't have to change advanced/shared actions.

Which kind 3D format file can be used by LV

I will try to make a 3D model and display it in labview, then make it can turn and mark.
May I know which kind 3D format file can be used by LV, thanks.
Solved!
Go to Solution.

I am not familiar with ASE, but can give you a little info on the other two file formats.
STL is a simple, triangle based, file format used by many pieces of software. All the major CAD programs can export it. Examples are AutoCAD and SolidWorks. Due to its simplicity, it is probably the best supported. It is also the most commonly used file type for 3D modelling (e.g. stereolithography, selective laser sintering, 3D printing). You can get instructions on how to convert from a .skp to a .stl here. I have not tried them so cannot vouch for their accuracy.
VRML format was invented for virtual reality simulations. It has remained somewhat popular.
A net search on any of these formats should get you a lot more information.
This account is no longer active. Contact ShadesOfGray for current posts and information.

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire). I'm also going to guess that either your DirecTv or your Blueray has a component output option. If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
I doubt you will be able to tell the difference on your DTV. Most of the stores that demo HD use component wiring on their store models. The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.)
Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching. I think I use my BluRay about 5% or less of my viewing time. If I "tossed", I wouldn't shed a tear.

Ive just opened up my brand new 5th gen, 32g, blue Ipod Touch. I turned on the power and started to use it until the battery went off. The problem is that its not charging. Im really starting to get frustrated please help!

ive just opened up my brand new 5th gen, 32g, blue Ipod Touch. I turned on the power and started to use it until the battery went off. The problem is that its not charging and i wouldnt know if it was charging or not because the screen

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
ANd
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT4341 which of the power adapters can i use in Peru, South America?

Similar Messages

Maybe you are looking for