HT4352 how do display my photos ini photo thru my tv with apple tv

how do i disply my photos in i photo on my computer thru apple tv  to my tv

I've gone to iTunes>File>Home Sharing> and choose photos to see on Apple TV but still only 47 photos show up on Apple TV.  iTunes says I should be seeing 1899 photos.  I've also reset my Apple TV and started from scratch but it didn't change my photos or add.  Any ideas?

Similar Messages

  • How,can,i,recovery,photos,from,phone,5,with,,broken,screen,,in,recovery,mode,and ,has,password

    How can i recovery photos from phone 5 with broken screen inrecovery mode and has,password

    Hi Tsorbie,
                      I am sorry to tell you that you cannot recover photos once your iPhone is on recovery mode.
    Regards,
    J_Kim

  • I need to know how to put a photo in a box with text under photo, so they all will move in page

    I need to know how to put a photo in a box with text under it, so they move together in a page of text.

    The Acrobat SDK might be a starting point.
    From there, perhaps a plug-in (built with C+).
    Perhaps with a licensed release of a PDF Library (this could be $$).
    The viable and cost effective alternative is use the tried and true.
    Authoring in an appropriate authoring application with appropriate tag management.
    Example:  Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
    This way you place "Alternative Text" when mastering content in the authoring file.
    Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
    Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
    Regardless, here you have a sub-forum for discussions on Acrobat usage.
    Consequently discussions on/of 3rd party software is rather out of scope eh.
    Be well...

  • How do I delete photos on an Ipad2 with an ios7 update?

    How do I delete photos on an Ipad2 with an ios7 update?

    In photos app bottom screen,tap to open then u see ur pics,just tap any pics and u then see bin on bottom right side.

  • How do i know if my macbook can use airplay with apple tv?

    how do i know if my macbook can use airplay with apple tv?

    AirPlay Mirroring needs an Early 2011 or newer MacBook Pro, so your computer supports AirPlay Mirroring. Make a backup, open App Store and purchase OS X Mountain Lion

  • How to transfer App Store purchase applications from my iPhone with apple I'd to my iPad

    How to transfer App Store purchase applications from my iPhone with apple I'd to my iPad without entering apple is to iPad. My iPad is at remote location

    Your post is unclear.
    ramtirath wrote:
    ... without entering apple is to iPad. ...
    What does this mean..?
    What are trying to achieve..?
    Download Past Purchases  >  http://support.apple.com/kb/HT2519

  • How to display employee photo in pdf through WebDynpro OR ABAP print Progr?

    hi,
    I have uploaded employee photos using TCODE OAOH. Now all the employee photos are stored in Archive link.
    Now my requirement is i have get the employee photo and display it in PDF using PDF forms and  webdynpro OR using ABAP print program.
    I am able to get the employee photo from SAP archive link using ABAP code. After this i have to upload this to MIME reository. From MIME repository i have to display it in PDF forms from WEbDynpro.
    I tried with ABAP print program, directly calling the PDF form in program and display the employee data with Employee Photo. With my program i am able to see only employee data. But it's not displaying employee Photo.
    Plz any helps to display employee photo in PDF forms using either webdynpro OR ABAP printprogram.
    If ur reply is related to WebDynpro, pla tel me how to upload photo to MIME repository From Archive Link.
    Since all the employee photos are uploaded into Archive link using Tcode OAOH. From this i have to get the employee photo and upload it to MIME repository and i have to display it in PDF forms.
    Any help are appreciated.......
    Regards,
    Shankar.

    Hi Sankar,
    1)You can use the program BSP_UPDATE_MIMEREPOS to upload the photos in the mime repository.
    2)Use the following code to get the content from your mime and set the content to your interactive UI element as Xstring format.
        data:
        mime_repository type ref to if_mr_api,
        content type xstring,
        url type string value '/SAP/BC/BSP/SAP/myBSPapplication/rajkumar.jpg'  .
      mime_repository = cl_mime_repository_api=>get_api( ).
      call method mime_repository->get
        exporting
          i_url     = url
        importing
          e_content = content.
      wd_context->set_attribute( name = 'DATAS' value = content ).
    Thanks,
    Rajkumar.S

  • How to display a photo slideshow in Widescreen 16x9 format?

    I just bought a 5g iPod and the A/V connection kit. I can play a photo slideshow on my 16x9 TV, but it stretches the photos to fit the screen, so they are out of proper aspect ratio. Is there a way to tell my iPod that it should be displaying the photos on a 16x9 screen?
    I understand that there is a widescreen option in the Video playback menu, but this does not seem to have any effect on the output of photo slideshows.

    Jon,
    See if this works. It may or may not.
    Go to videos-->video settings-->Widescreen-->On
    See if now when you play the photo slideshow it works right.
    Now, if it doesn't then I don't think there is much you can do.
    Tell Apple about the issue (if the steps above don't solve it)
    Send Apple Your Feedback
    btabz

  • Displaying Employee Photo thru Web Service

    Hi,
    I am having a requirement of displaying the employee photo's thru weservice, in asp.net application.
    Is it  possible?
    If anybody knows..
    Guide me to close this issue...
    Thanks & Regards,
    Balajee Jeyaraj .

    Hi Pramod,
    Thanks for the reply, we stored all our employee photos on  ECC System Only...
    If i enter the Personal No: in PA30, i am able to see the EMployee Photos on the Header..
    But While accessing the COD Service from the Portal, asking ECC system credentials to display the photo.. If i am providing the Credenials Employee Photo is displaying .. other wise Blank Image Displaying...
    Siddarth suggested its due to SSO problem, if its sso issue, how come i login into portal without any errors currently we are using ABAP UME both Portal and ECC Login details r same...
    Please Suggest me how to fix the issue...
    Thanks in Advance
    Adapag

  • TS4425 How can I remove Photo Stream pics from my Apple TV slideshow?

    I am a decorator and take photos of furniture, fabrics, etc on my phone daily, but I do not want these photos cycled in the slideshow on my Apple TV.  I have iTunes pulling photos from designated folders on my home computer, but I can't seem to figure out how to remove my iPhone photo stream pictures.  Suggestions?

    Hi lpetershagen,
    Here is an article of information on ways to delete photos from Photo Stream:
    iCloud: How to delete photos from Photo Stream
    http://support.apple.com/kb/HT5125
    Alternatively, you can choose different photos for the Apple TV screensaver by following this:
    Apple TV (2nd generation): How to use your photos with your Apple TV screensaver
    http://support.apple.com/kb/HT4362
    Cheers!
    - Ari

  • How do I get Photos - iPhotos to work with my iPhone

    I have a 2 month old Mac Mini, and noticed a system upgrade available 10.10.3 - I always download all that are offered.  10.10.3 loaded, and I proceeded to open iTunes and iPhoto and plug in my iPhone, All went well until I noticed PHOTOS  I opened it to see what it was and was asked to selected a library as it seemed the only option on offer I did and found a mass of over 3500 photos  in folders that I did not totally recognise, including one of Face photos. It was only then that I noticed a NO ENTRY SIGN on iPhotos.  Thanks to some Mac Forum advice I have now been able to install a new iPhotos 9.6.1 to replace this but I now have a big problem that I cannot edit the photos on my iPad or iPhone.
    I have 10.10.3 installed with iPhoto-9.6.1 - PHOTOS-1 - iTunes-12.1.2.27 & iOS-8.3 on the iPhone & iPad.
    I Plug the iPhone into the Mac, iTunes can see it, click the camera icon I see a list of 30+ folders - 2 are ticked which are MC, it has 19 photos in it and PP, it has 1 photo in it - which is correct for the iPhone.
    In PHOTOS when I plug in the iPhone, a new command appears in the top bar  ‘IMPORT’  click on that and the iPhone icon shows on the left side with a box to tick - ‘open this device’ - click it and the message is ‘NO PHOTOS’. Under Albums I find the same 30+ listed with MC containing 50 photos & PP with 33.
    In iPhoto I plug in the iPhone & it is recognised with a  message on the right , LOADING… and there it stays STUCK but not crashed. Down the left side is listed the same 30+ albums, MC with 50 photos & PP with 33.
    Question - how do I get Photos/iPhoto/iTunes/to communicate with my iPhone/iPad, to update the photo albums as they did before 10.10.3 & Photos were introduced to my system????    Your help please

    Thanks for your help III
    BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
    But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere! 
    Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
    So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
    Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
    Thanks for your Help!

  • How can i save photos on a 5s with 2 broken screens?

    both the screens on my 5s are broken so i can't enter my pass code to sync to the computer, is there some way to get into the phone to save my photos?

    fouiiin wrote:
    I just bought a WD network disk to put all my photos. I wish to look at them with apple TV but can't find how. The only thing I see is what shared in my laptop Itune. Can't I just acces the content on network device without going through Itune?
    It should be easy as looking what's on the network and brows through the content!
    AppleTV2 does not support directly accessing media on network drives.
    All media viewed must be via itunes.
    If you can point iTunes to a folder on the network drive (Advanced>Choose Photos to Share) you maybe able to access them but only when itunes is running.
    AC

  • I edit and rotate photos using MS Photo Editor. when open with Apple TV- photos still have 90 deg rotation. Why ?

    I edit and rotate photos using MS Photo Editor.
    When open with Apple TV- photos still have 90 deg rotation. Why ?

    Does this have anything to do with iPhoto for the Mac? If so please descrive what and exaclty wha tryou are doing
    LN

  • How do I turn off "find my phone" on icloud with apple id

    how do I turn off find my iPhone on icloud.com with apple.id?

    Log into www.icloud.com with your Apple ID & Password, go to the Find My iPhone section, select the device, and remove from account.

  • How to Displaying Employee Photo in ESS Who's Who via Reverse Proxy?

    Dear Gurus,
    I have a bit of problem to displaying employee's photo in ESS Who's Who via Reverse Proxy.
    In my landscape, end-users are only able to reach the Reverse Proxy server, not the actual SAP server itself.
    In Who's Who, when displaying the employee's info, the URI for the photo is generated using the actual SAP server name.
    Illustration:
    - the URI we expect: https://portal.domain.com/sap/bc/contentserver?.....
    - the URI we get: http://r3server.domain.com/sap/bc/contentserver?....
    Does anyone know where/how I can set the URL (hostname and protocol part) to refer to my reverse proxy?
    Or is it because SAP is using an absolute path rather than the relative one?
    How do we go about it?
    Thanks in advance.

    Dear Barinbhai,
    How are you? We are fine at here!!!
    Following URL generated thru Portal
    System generated : http://p30app06.ril.com:8000/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
    Photo opening directly on following URL:::
    Desired URL : http://ess.ril.com/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
    Pls sugget..
    Hitesh Khatri
    SAP -HR
    RIL - Navi Mumbai....

Maybe you are looking for

  • JEditorPane parsing HTML

    Hi all, I am using JEditorPane and it's ability to parse HTML, which although is relatively old and crusty is certainly all I need for the job. Now, I understand there is a chain of classes involved in taking my .html file and turning popping into a

  • After DND AbstractButton, setSelected not work

    Recently, I got problem in DND with AbstractButton and would like to share my finding After DND an AbstractButton, Within the DragSourceListener.dragDropEnd I get the dragged AbstractButton and invoke its AbstractButton.setSelected(false); The select

  • CASE problem

    The statement below has encountered a problem in forms. select (case when a.code >=b.code then a.code else b.code      when a.code >=c.code then a.code else c.code end) test from (select max(y.code) code from table1 x) a (select max(z.code) code from

  • I'm able to open itunes but it doesn't play anything selected

    I am able to open itunes but it does not play anything selected. I have rebooted my Samsung laptop but problem remains. I use Windows8. It was playing ok two days ago.

  • HT4528 How do you restore your phone is it wont connect?

    How do you restore your phone from apple.com/support when it is not connecting to the computer?