HT4356 How do I connected HP Photosmart C6380 all-in-one wireless printer to my iPad

When I put in the key it says that it cannot connect But my iPad is connected to my wireless Internet as well as my computer and my phone

Check out this article. Your printer has to be on the list as air print compatible first.

Similar Messages

  • Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

    HP - Photosmart e-All-in-One Wireless Printer  (CN731A)
    Went through setup on Windows 7 64-bit, printed the test photo, came out great.  Thought everything was good to go.  Later, when trying to print a document, it wouldn't print.  Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there.  I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed.  This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer.  I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo?  Any ideas would be appreciated!

    Hello,
    Try the below steps ..
    While the printer is ON, Unplug the power cord from back of the printer.
    Disconnect all the cables that are connected to the printer.
    Wait for 30 seconds.
    Plug in only the Power Cord. ( Printer would Power on ).
    Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges  or the Printer .
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • IPhone 5s can't connect to HP C7280 All-in-One wireless printer

    I'm trying to connect to my IPhone 5s to my wireless HP C7280 AiO printer. I just downloaded HP AiO Remote app. My printer is connected by ethernet to
    the same wireless network as my phone. My phone can't locate the printer when selecting this wireless configuration. My printer is in the list of supported printers. Please help. Thanks!

    The printer needs to be connected through the same WiFi network as the iPhone in order to use AirPrint. Connecting via Ethernet will not work.

  • How do I get my photosmart premium all-in-one C309g printer back online

     My printer won't print because it somehow put it self offline.  I can't figure out how to put it back online.  I have already tried turning the printer off, waiting for a while then turning it back on.  I also turned off the router, and the computer waiting for a while then turning them back on.  None of this has worked for me.
    If it is my printer that is causing the problem, then I will just get a new one, but first, I want to try everything to see if I can get this problem solved.
    thank you

    Hi Vee_girl,
    Welcome to the HP Support Forums! I see your HP Photosmart C309a will not print, the printer is showing as offline. I would love to get you back up and printing but require a little more information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. Have you re ently changed any of the wireless settings, or router?
    If you have a Windows OS later than XP, please start here: HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, if you are still getting the 'Printer Offline' error message I would like you to continue here: 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Photosmart B110A all-in-one wireless printer

    Printer keeps disconnecting itself from the wireless connection, have tried setting a static IP address but no luck. Any other solutions available? Can I alter the stand-by settings for the printer?
    Any Help would be greatly appreciated.
    Many Thanks,
    Darren
    This question was solved.
    View Solution.

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

    I replaced a broken Vista laptop with a new Windows 7 64-bit laptop.  After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly. 
    I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
    We've tried all the suggestions for resetting the printer that we can find on the HP forums. 
    The printer works properly when connected via USB cable to a Vista laptop. 
    I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
    When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
    We need to determine whether achieving a wireless connection is hopeless.  If it is not, we need step-by-step instructions on how to resolve the issue.
    The security system for the printer is WEP.  We connect through a wireless router provided by Verizon FIOS.
    Many thanks in advance for your help.

    Some of HP's printers do not support WEP shared.  If you are using WEP shared this could be the problem.  I would suggest turning off the WEP security temporarily to see if that fixes the issue.  If it does then you can look at changing the security to WEP Open system authentication.
    Mike
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    I am an HP employee.

  • HP Photosmart e-all-in-one NOT PRINTING for MAC 10.9.2

    Hi,
    I have a HP Photosmart e-all-in-one wireless that I have been using for my Apple devices (Mac, iphone, ipad) for years and recently it started giving me problems. 
    First month or so ago, out of nothing the MacBookPro would not see the printer connected, in dispite of been connected to the network. During that time I was able to find it connected from my iphone & ipad. Then I was using to print from these last two.
    Now, not even from my iphone & ipad. It seems that printer does not exist at all, coz it always says "printer not connected" on the MacBook and "No AirPrint Printers Found" on the ipad & iphone. 
    I've noticed that on HP website, the most updated version of the Mac is 10.9 and my devices has 10.9.2 Is this the problem? If so, how can I get by and continue to use the printer? I need to print ASAP.
    Thanks,
    eb

    What router? Have you restarted the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

    error message on my HP Photosmart C7280 All-in-One  'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

    Hello @GeoffH777 ,
    Perfect! You are very welcome, I am very happy to hear the reset helped!
    If you  have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
    Greatly appreciated, have a wonderful day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Photosmart C4780 All-in-One Only Prints Half a Page

    MacBook Pro 15.4 Laptop Model A1286
    Snow Leopard 10.6
    HP Photosmart C4780 All-in-One
    Wireless Connection
    Airport Extreme Sim Dualband
    New to wireless
    Why does the wireless printer take several minutes before it prints?
    Why does it print only the top banner of a web page?
    Why does it print only quarter or half the page of a document or web page?
    Why does it continually lapse into “pause” mode?

    Do not connect a USB cable to the router.  This will confuse and defeat the wireless connection.
    Let's add the printer using WPS:
    FIrst, start the WPS process from the front panel of your printer (Setup [Scan] > Network > Wifi Protected Setup)  Then:
    open the Apple Airport Utility
    select your wireless router
    select Manual Setup
    select Add Wireless Clients ... from the Base Station menu
    Select First Attempt then press Continue.
    You have to start the Apple Add Wireless Client process within two minutes of starting the printer's WPS pushbutton method. Actually, order doesn't matter ... you can start the Add Wireless Clients process on the the Apple router first then start the printer's WPS pushbutton method.
    Now your printer will be connected to your router.
    Because there are two printer icons in the list, let's reset the printing system again:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do you get a MacBook with OS X10.6.8 to print to an HP 4500 all in one wireless printer?

    How do you get a MacBook with OS X (10.6.8) print to an HP 4500 all in one wireless printer?

    Go to http://www8.hp.com/us/en/support-drivers.html and ensure you have the latest printer drivers loaded. Also, HP will often post the steps to enable the wireless functions when setting up the AIO functions.

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Photosmart 6520 all in one not printing

    Hello,
    My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

    Hi Roselilith823,
    I came across your post and was wondering, was the issue you were experiencing resolved?
    Roselilith823 wrote:
    Hello,
    My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
    If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My HP photosmart 2610 all in one will print by not allow me to save or send a scan

    My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan.  i assume it is a bug with maverick.....which i recently downloaded

    Does this thread help?
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

  • How do I connect my new MacBook Pro with my wireless printer?

    New to Apple products, and can't figure out how to wirelessly connect to my printer.  I am assuming that it has that capacity....but can't find a way.  I have an HP officejet 4500 wireless printer.
    Appreciate the help.

    As you will come to discover and appreciate in this new world, most common and mundane tasks have been designed to be simple, easy and, often, self-evident. But we've had to put up with Windoze's Weird Ways for way too long and have had our instinct to do things naturally blunted. Fortunately, the brain damage is curable...
    Cheers!
    P.S., in time you'll come to appreciate and benefit from the Mac's minimalist design, as was the Will of Steve throughout Apple's products.

  • How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

    I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

    Hi,
    What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
    For Android, please use the following app:
       https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • How to hide artboard in CS3?

    How to hide artboard in CS3 by SDK, same as View->Hide Artbard? Thanks!

  • Reinstalling OSX mountain lion

    My computer is acting strangely and stops all the time to work - I can hear lots of little hard drive sounds and it is very slow until it is done (usually about 10 minutes), and my Adobe CS products are crashing and creating corrupt files that keep s

  • How to determine the purchasing group using BADI BBP_PGRP_FIND

    Hello Friends We use SRM Server 5.5 (Classic scenario). As you know that, purchasing group has the responsible product categories in PPOMA_BBP, when user creates the shopping cart to determine the purchasing group.  In our case, we should determine t

  • Wrt54g ip page is messed up, need help.

    so i went to use my old router and when i go to set it up at 192.168.1.1 only a couple things load. tried a reset and a 30/30/30 reset.  took a screen shot to show what the ip page is doing, oddest thing ive ever seen.

  • "no pages selected from document" when printing

    When I try to print a picture I have selected, it says I have not selected it. Why? I know I am selecting it. It also says it is too big for the paper size which is a 4x6.