HT4356 how to access ethernet connection on iPad?

without wirless how could we access ethernet connect?

Connect your ethernet cable to a Airport Express to get Wi-Fi.
https://www.apple.com/airportexpress/

Similar Messages

From my iPad I can print wirelessly in my office, but how do I print remotely via the web through my HP ePrint printer. It is set up with an email address but i don't know how to access it from my iPad.

I can print wirelessly in my office from my iPad, but how do I print remotely via the web to my HP ePrint printer. The printer is set up with an email access address but I don't know how to access it from my iPad.

Read through this for some information on how to do this:
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devi ces-ipad-iphone.html

Advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

I am after some advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

If you have a dropbox account, there's a free app (probably more) that syncs photos to your dropbox account - picbox.
There's also PhotoSync that syncs photos to/from a number of different services and devices.

HT4356 How can i print from my iPad without any wireless network?

I develope bids on my iPad out in the field (where a wireless network is hard to find) and I need to print it from my truck to deliver to my customers.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to have ethernet connected PC use printer and USB HD connected into TC

So I just got a new Time Capsule (500GB) and the way I have it connected is the cable modem goes through it and then another ethernet cable connects to my desktop PC (no wireless on this PC). Then I have my USB printer and USB HD going into the USB port on the Time Capsule via a USB Hub. Airport utility sees both the HD and the Printer.
My problem is that I can't get my PC to see the HD or the Printer. How does a PC connected through a ethernet cable and not wireless see and use these two peripherals? I have Bonjour for Windows installed but I thought that was for a wireless connection? Also is there a way to open some kind of configuration thing for Bonjour on my PC? Where on my PC would I find the HD and Printer (like in Windows Explorer or Network Places), I can't find these devices anywhere except when looking in the Airport Utility Manual Setup.
Any help would be much appreciated. I don't have much technical knowledge about networks.
Edit: One last thing is that before getting the TimeCapsule, I had a regular D-Link router running my wireless network and the printer was connected directly to the PC. This setup allowed my Macbook to use the printer and access any shared folders/files on my PC. My Mackbook was recently stolen and my new one will arrive next week, so right now I can't really test whether the Macbook can see and use the HD and Printer if they are connected to the Time Capsule. I'm wondering if I should just go back to plugging the HD and printer into the PC and running the network sharing that way????
Message was edited by: arbitrage

Just wanted to bump this question to see if anyone has any answers. My main issue is seeing the time capsule from my Windows desktop and the connected harddrive. However, my new problem is that whenever I connect the USB Windows Formated HD to the Time Capsule the whole thing just stops working and my PC and my MacBook can't read the Time Capsule at all until I turn of the USB HD. Any help would be appreciated.

How come when I connect my iPad I wont work

When I connect my iPad to my computer and iTunes it shows a message saying " This iPad cannot be used because the Apple Mobile Device service is not started. "

This page explains how to start the AMDS and also how to set it to start automatically : http://support.apple.com/kb/TS1567

HT4356 How can I print from my iPad in the app Pinterest

How can I print from my IPad in the app Pinterest. I cannot find a way to do it!

I think she/he meant me.
If the app won't let you print directly from it you might want to open in safari or make a screen capture then print from your photos.

Seems I have a iClould account but not sure how I got it or how to access it on my iPad. Any help in figuring this out would be appreciated.

Seems I have a iCloud account on my iPad but not sure how I got it as I do not remember signing up for this feature. I got an e mail message saying I was running out for space on my iCloud and was given directions on how to find it on my iPad. I followed the directions but there was no iClound anywhere in my iPad settings.
Any help in figuring this out would be appreciated.

If your iPad is running iOS 5 or higher, iCloud would be listed in Settings. If you are signed into an iCloud account your iCloud ID would be listed in Settings>iCloud.

How to access PC files from iPad

How can I access PC files from my iPad?

Depends on what kind of files. You have to have an app on your ipad that can open those files and share them.
You can download the icloud control panel and use that on your pc.
http://www.apple.com/icloud/setup/
itunes also supports file sharing:
To transfer files from your computer to your iPod touch, iPhone, or iPad:
Connect your iPod touch, iPhone, or iPad to your computer.
In iTunes, select your device (below Devices), and click the Apps button.
Below File Sharing, select an app from the list, and click Add.
In the window that appears, select a file to transfer, and click Choose.
The file is transferred to your device, and can be opened in the app you selected in step 3.

How do I wirelessly connect my iPad 4 to a Sony Bravia TV?

My Sony Bravia KDL-32W653A recognises that my iPad4 is on my LAN. But I just can't get the iPad content ( videos ) to show up on the TV screen.
The iPad Settings shows the " direct -GC-Bravia" other connection, but it wants to revert to my (John Lewis wireless connection.
If I tap on the other, Bravia panel I am asked for a password. I don't have a password for it and never have had. If I try to use my Apple password or that of my Sony support log-in or even my LAN home group , the iPad just messages:- "Unable to connect to Diect-GC-Bravia"
I seem to go round in circles and get nowhere- Can anyone out there who has an iPad 4 (retina display AND a Sony Bravia TV help me please?
Maybe even a Sony employee? who owns a similar iPad?
Davidthebass.

You dont. Apple won't allow widely used standards and Sony is so behind the times in this area it's painful and almost as bad. Apple forces you to buy an Apple TV whereas Sony forces you to own an android phone to do this natively. Surprise!
disappointed I started my smartphone tenure with Apple; had no idea how badly it was going to burn me in about 100 different ways over the years. All they have on android these days is more efficient hardware...: and since they don't take advantage of it... It's a moot point at the price premium.
as for Sony. I just spent more than I did on my last car for their flagship and id be satisfied if it costed about 75% less and wasn't a "smart" TV. Since it is - and this is 2015; the cost coupled with the inability to properly stream or mirror from.... Meh. Not gonna waste another word. If neither get it by now, they never will. Talk with your wallet guys, it's the only language they understand. Unfortunately they are wise enough to know the sheep outnumber dramatically so it's in vain anyhow.

How to access defined connection in my project

I am new to JDeveloper,
I created a "Connection1" through Connection Wizard and store it under the Connections node in the System Navigator. I also tested it, it works fine itself.
According to online helper "All defined connections to external data sources are stored under this node. All defined connections are accessible to any workspace or project."
But how to use this "Connection1" in my Java Program? I just couldn't seem to find any example.
Thanks for help.

The Online Help has some nice tutorials to work with BC4J. There you will learn more about the wizards. JDev is not just for creating Java classes ;-). With BC4J you have a complete framework do access your DB, define your business logic, etc. I used the tutorials in the online help and the JDeveloper Handbook from McGraw-Hill. The new one covers JDev 9.0.3 as well.
Axel

How to access VPN Connection properties in Win 8.1

Win 8.1 pro 64 bit
I setup a VPN connection to my company host server. When I try to connect, I get no EAP protocol installed on the Win 8.1 system. I googled and it said to open VPN properties (like I have done before); however, I cannot find the open VPN properties function.
I right click on the VPN and it does nothing. It did work in win8. How do I get to VPN properties to add EAP to the VPN connection?
THX
John Lenz

To access to your VPN properties you should navigate to Control Panel > Network and Internet > Network Connections. From there, you will see all of your network connections, including any existing VPN connections. If you right click on the VPN connection
in question, you will see "properties" listed at the bottom of the list and EAP settings can be modified under the security tab. Let me know if you have trouble.

How to access portable storage on ipad air

I'm looking for a new tablet to replace my ipad1 which I no longer use. My primary use will be to play films and music ripped from my own Cds and DVDs/blurays. The drawback with ipad1 was that I couldn't attatch portable media and transfer files to my ipad without a computer and itunes. Has this changed? Can I now have my films and cds on sd cards or usb sticks etc and transfer them directly to ipad air. Or... would I be better to buy an android device with usb and sdcard support? I'd prefer to go ipad air if possible but not being able to access a large library of externally held media would be a deal-breaker. thnx

There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
SanDisk Connect Wireless Media Drive
http://www.sandisk.com/products/wireless/media-drive/
WD My Cloud
http://www.wdc.com/en/products/products.aspx?id=1140
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How to access database connection from datatsource in a standalone java ap

My java standalone application wants connection to database with lookup to datasource name which is configured in the oc4j app server.
Please guide me with some ideas to acheieve this.

user510497,
Following sample program requires access to classes in "oc4j.jar" file.
Test environment:
* Server:
+ OC4J stand-alone 10.1.2.0.2
+ Red Hat Enterprise Linux AS release 3
+ Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
+ Oracle Database 10g Release 10.1.0.4.0 - 64bit Production
* Client
+ Microsoft Windows XP Professional Version 2002 Service Pack 2
+ Java HotSpot(TM) Client VM (build 1.5.0_08-b03, mixed mode, sharing)
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.SQLException;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DataSrc2 {
public static void main(String[] args) {
    Connection conn = null;
    Properties l_props = new Properties();
    l_props.put(Context.INITIAL_CONTEXT_FACTORY,
                "com.evermind.server.rmi.RMIInitialContextFactory");
    l_props.put(Context.PROVIDER_URL, "ormi://your_OC4J_host/");
    l_props.put(Context.SECURITY_PRINCIPAL, "your_OC4J_user");
    l_props.put(Context.SECURITY_CREDENTIALS, "your_OC4J_password");
    Context l_jndiContext = null;
    try {
      l_jndiContext = new InitialContext(l_props);
      Object l_obj = l_jndiContext.lookup("default-data-source");
      DataSource ds = (DataSource) l_obj;
      conn = ds.getConnection("scott","tiger");
      DatabaseMetaData dbmd = conn.getMetaData();
      System.out.println(dbmd.getDatabaseProductVersion());
    catch (NamingException x_naming) {
      x_naming.printStackTrace();
    catch (SQLException xSql) {
      xSql.printStackTrace();
    finally {
      if (l_jndiContext != null) {
        try {
          l_jndiContext.close();
        catch (NamingException x_naming) {
          System.err.println("Failed to close JNDI context.");
          x_naming.printStackTrace();
      if (conn != null) {
        try {
          conn.close();
        catch (SQLException xSql) {
          System.err.println("Failed to close [database] connection.");
          xSql.printStackTrace();
}NOTES:
1. Datasource lookup name is value of "default-data-source" attribute of "orion-application" element in file:
<OC4J_HOME>/j2ee/home/config/application.xmlGood Luck,
Avi.

Need help on how to access secure connection sites

Hi,
i am unabe to connect https site. The same site is being accessed using other N97 mobile. He is getting message that can i connect to secure site yes or no. I amnot getting the same message. Initially i got the messae i seleced no by mistake now i am unable to access that site. This message is about lcertificates. Can some one help me

By default there is no username and password is admin in lower case...If that does not work then,you need to reset the router for 30 seconds by pressing the reset button on the router and then,you have to reconfigure all the settings again from scratch.

HT4356 how to access ethernet connection on iPad?

Similar Messages

Maybe you are looking for