HT4356 HP LaserJet Pro M1217nfw MFP. AirPrint issues.

My printer, the HP LaserJet Pro M1217nfw MFP, is listed above as an AirPrint-enabled printer model, but I am still receiving the “No AirPrint Printers Found” message. Since I have successfully printed from three PCs connected to the WiFi, I know the HP M1217 wireless printer is working.
Not a Apple network.
2 PCs running Windows 7 and one XP.
iPhone 5.1.1
Can anyone help my iPad and iPhone 4s find the printer OR explain why these devices do not work and my three PC do?

Hi Scott, ensure that you have the latest firmware installed that enables this function.
Hope this helps!

Similar Messages

HELP! HP LaserJet Pro M1217nfw MFP Wireless setup

I cannot set up my HP LaserJet Pro M1217nfw MFP to print wirelessly. I do not have a router and bought this machine because I was told this printer was an easy ad hoc install. I have a MacBook that runs OS X 10.6.8.
4 hours later and I'm dying here! SO NOT HAPPY!
Thanks in advance!

I just spent the last two days on this and have finally sorted it out. It actually isn't that hard to do but for some reason, no one has consolidated the information in one place!
First and foremost, make sure that you have all the latest and greatest firmware updates for your printer, your computer and your mobile devices.
Next, you need to connect your printer to your network via an ethernet cable, this is the only way to get in to the printer softare to configure it for your wireless network.
Navigate the printer menus on the keypad to Reports>Config Report and print this report. It will provide you with the IP adress and IPv4 address for the printer.
With the printer connected to your network and powered on, point your browser to the IP address of the printer. If this doen't work (it didn't for me) use the IPv4 address.
This will open the configuration panel for the printer and will let you configure the wireless for the printer so that it can join your wireless network. You will see various tabs across the top. Select network. Then along the left you will see wireless. Choose that. Now you should see a list of wireless networks available including your very own home network. Choose that one, enter your password and hit apply.
Disconnect the ethernet cable and you should be ready to Airprint from all devices. This worked for me, I can't imagine it won't work for all...then again...

Issue Printing One or Two Checks on HP LaserJet Pro 200 MFP M276nw

I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

Me too.
I've been using an alternate printer for printing the checks, but I'd rather get rid of the old one. (The HP Laser Pro 200 takes up a lot of space!)
KC, Seems like you've been waiting for an answer for a VERY long time. I'm not going to hold my breath.
Hey HP! Do you ever monitor this site?!
KC-Texas wrote:
I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

Hp laserjet pro m1217nfw and remote desktop printing

hp laserjet pro m1217nfw and remote desktop printing, is there any issues with said function?

whats the problerm you are having??

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Cold reset HP LaserJet Pro 400 MFP 425dw

Hello,
We Just recieved our HP LaserJet Pro 400 MFP 425dw in the office.
I configured the networking and set a administrator PW ( 20 characters random generated with keepass software).
The has been set, but seems to be different from the one in our Password application - i can't enter the printer setup.
I already tried to reduce characters or add space - nothing works.
I've already googled how to cold reset the printer, bur the buttons on the touchpad don't seem to work when booting.
What are the button combinations for cold reboot?
Please help!!
br
G

Hi @biggddc , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

SCANNING ERROR HP Laserjet Pro 400 MFP M425dn

Hi there,
The issue I am having with my HP Laserjet Pro 400 MFP M425dn is that when Iam scanning some pages scan in parts black and sometimes the whole page black??? (see botttom of page where the scan preview shows)

Hi chicalatina,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP LaserJet Pro 400 MFP M425 - paper feed is always legal

HP LaserJet Pro 400 MFP M425
im unable to have the paper feed use letter paper.
I can scan with the scanner bed and it select letter paper correctly, but when i attempt to use the paper feed its always legal size
Ive restored to factory default settings, but still issue continues.
how can i make the change to have it select letter size.
thank you
This question was solved.
View Solution.

Hi @biggddc , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Laserjet pro 400 MFP M475dw after new firmware no more WPA2

Dear all,
After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
When we use WPA we are unable to connect.
Can we download the older firmware again? I can't find it...

Hello janwillem_v,
The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

LaserJet Pro 400 MFP not working on the network port that works HELP !!!

I have a new LaserJet Pro 400 MFP (M425dn) USB works fine. When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity. So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it - no network activity. I tried several ports in the front office and the printer can't connect to the network. BUT HERES THE FUNNY THING . If I take the printer to the back room where the router/switch is and plug it directly into the switch
( the same port as the front port ) it works !!!!! so why doesn't the printer work at the front office network port, where all the other devices work just fine using the same port ? But it will work, at the router/switch using the same port lol this is drving me crazy
any help ? ? ?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet pro 400 mfp m425dn says install black cartridge

I have a laserjet pro 400 mfp m425dn that keeps giving "install black cartridge" message. I mistakenly thought it was calling for a new cartridge so I ordered one and installed it. It still gives the message. I could not find anything out of place. I did notice that the left side of the cartridge is slightly raised. (may be my imagination because it is very slight.) Any suggestions???

Hello Sardonnic_Pizza,
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Laserjet pro 400 mfp m425dn scan software

I have a LaserJet Pro 400 MFP M425dn all-in-one device. I have it connected via USB. It works as a printer. I cannot get any of the scan software to recognize that I even have a scanner.
I have Windows 8.0 (junk).
I have installed HP Scan and Capture software. I have installed the drivers - I had to go do devices and put the CD in the drive and search for driver there.
How do I get the software, HP Scan and Capture, to recognize the scanner? I can print fine, I need to scan, too.

Hello Sardonnic_Pizza,
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

HP LaserJet Pro M1217nfw Multifunction Printer scaner driver problem in windows 7

I have a HP LaserJet Pro M1217nfw Multifunction Printer. Printer is ok but Scaner has problem in Windows 7 scaner driver is deleted when i try to scan it show the error " Scaner not communicate " I have to reinstall driver after few minitus again same problem . Pls advise me what is the best solution for that

Hi KrunalPatel,
I'll paste a link to a troubleshooting document below - from what I've read, it has the best chance at fixing your scanner errors, as it has the most steps to try
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02917811
Please let me know how it goes
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Laserjet Pro M1536dnf MFP - scanner not working

I have just bought and installed an HP Laserjet Pro 1536dnf MFP. The copier and printer work, but I can't get the scanner to work. I have downloaded the software several times and triedn to install it, but it doesn't work. In the end it times out and says there is a 'fatal error'.
Any ideas? The printer didn't come with a USN cable, so I am using the one from my previous HP printer. Do you think that could be part of the problem?

Hi Watu-Na-Nuru,
Thank you for providing that information.
There should have been the 2 drivers listed. Not sure why it wasn't listed.
How was the scanner listed in the device manager under imaging devices?
I have provided some steps for totally removing the old printer software, so we can start over again.
Disconnect the USB cable if you are using the USB connection and not a Ethernet connection.
Remove Old Printer Drivers.
I believe there is a scrubber on the CD to remove all the printer files.
Open the files on the CD/utility folder/scrubber.
Unregister and reregister Microsoft Windows Installer
Click Start (), and then click Run.
In the Open box, type msiexec / unregister, and then click OK.
Click Start and then click Run.
In the Open box, type msiexec / regserver, and then click OK.
Reinstall the software again on a new account with Admin Rights.
Create a new user account with Admin rights.
How to create a new user account in Windows 7 and Windows Vista.
If the issue persists, run the Microsoft Fix It Tool.
Fix problems that programs cannot be installed or uninstalled.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, let me know.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

BLUETOOTH ADAPTER LASERJET PRO 100 MFP M175A

Hi,
Can anyone tell me the correct bluetooth adapter for a LaserJet Pro 100 MFP M175A?
I was just about to purchase the BT500 but realised it is not compatible with the model I have.
Thanks in advance.

Hi Orinoco,
Thank you for visiting the HP Support Forums! To get the best answer to your question please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HT4356 HP LaserJet Pro M1217nfw MFP. AirPrint issues.

Similar Messages

Maybe you are looking for