HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!
I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!
You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing!
Similar Messages
-
Hello! I have configured my Wireless network to support bonjour protocol. When I support mDNS in the same Vlan I can see the Apple TV with my iPhone, but I cannot see it with my iPad. Someone know if there is any different in the Bonjour protocol between the iPhone and the iPad???
It is like if the iPad changes the process at some point...
Thank you!You don't need to configure anything specific for it to work unless you had some special filtering in place already.
What do you mean specificly by can not "see" it with your iPad? -
Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there
Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there
-
IPhone and iPad cannot connect via Remote to iTunes
I updated iTunes yesterday and today none of our iPhones or iPads can see the itunes library via Remote. I've gone through the troubleshooting. The best result I got was to get the icon to reappear on remote's devices list. But it won't connect when I select it. Eventually it stops looking and I get this message "Remote can't connect to your iTunes library. Check your network settings and try again." I've checked all the settings on all the devices. I've logged out and back in. I turned the router off and back on. I've turned home sharing off and back on. Network seems to be working fine for everything else. I have not checked if my Apple TV will work or not.
Any other ideas?
ThanksFixed the problem - all I needed to do was power cycle my router. Schoolboy error!
-
IPhone and iPad cannot connect to iMac
I'm having trouble connecting my mobile devices to my iMac using Edge Inspect. Edge Inspect is running on my machine and in the browser (the icon is illuminated in the Chrome taskbar), but when I try and connect my iOS devices via the Edge Inspect app on each one, they cannot see my iMac and any attempts to use 'Manual Connect' (with any of the 3 IP addresses shown in the Chrome plugin's menu box) result in an error message:
"Connection unsuccessful, please try again."
I've got the latest versions of iOs and the Edge Inspect apps running on my iPhone and iPad, OS X 10.8.3, Chrome 26.0.1410.65 with the Edge Inspect plugin and the latest version of the Edge Inspect app running on my iMac, and have verified that port 7682 is open on my iMac. Edge Inspect is shown as allowing incoming connections via my firewall. I've tried restarting the Mac, to no avail.
TL;DNR: I've tried everything that I can find online to get the application to work, but my devices can't 'see' my iMac. Can anyone help?
(If it matters, I'm running a BT Home Hub 3.0 for my home network.)Fixed the problem - all I needed to do was power cycle my router. Schoolboy error!
-
The problem is when I open my I POD i can see the
Try first when Pages is quitted:
Delete the com.apple.iwork.pages.plist from the Users /her name/Library/Preferences
On Lion when in Finder, press and hold the Option key, while selecting the Go menu. You can then select Library and you will see all of the usual sub-folders.
For good measure log out and in again
Try Pages again. If you still get blank pages you can try installing iWork/Pages again.
To uninstall correctly iWork, go to Yvan's iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Expand the archive and run the script.
Then install iWork with Pages again. If you have installed from iWork CD don't forget to do the updates too. -
My apple tv2 can see my library on my new Mac but will not connect to it.
I just made the move from PC to Apple Mac. Home sharing worked great on my PC but not on the Mac.
I have been through the recommended checklist.
My library appears beneath the "Computers" tab but when I try to connect I just get the spinning wheelYeah. You, me, lots of people.
The error message isn't helpful, as you've discovered. You begin to wonder such things as, "if iTunes 'wasn't running', then how can the AppleTV see its library? If iTunes or OS X wasn't up to date, why wouldn't the Apple TV do a quick version check on it and let me know?" And so on.
I started having this problem a few months ago, sometime around iOS 4.3. It's been a widely-reported bug here for quite a while, with usually a range of obscure things that work for some people and well, no one else.
So with that big caveat in mind, here's what works for me: reboot the Mac.
Here's what hasn't worked for me:
1) Restarting the ATV2
2) Restoring/updating the ATV2
3) Staying current with OS X, iTunes versions etc.
4) Rebooting the router, a 5th-gen AirPort Extreme (wired connection; the ATV2 isn't on WiFi.)
5) Logging out of OS X
6) Restarting iTunes
7) Turning off/re-setting up Home Sharing
Mine has a curious twist however: We normally keep our Mac running with two OS X users logged in and each iTunes running. The Apple TV2 sees them both but only can connect to whichever library was first opened. To "switch" to the other iTunes library in ATV2 we have to reboot the Mac and make sure the relevant user's iTunes gets launched first.
Our original AppleTV has never had this problem. -
Is anyone unable to connect to iTunes in a hotel using hotel wifi? I can do everything els on the Internet except get connected to iTunes
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers, Tom -
A few days ago Firefox stopped working when using shortcut or exe. file. The message http://en-gb.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-GB:official appears, although when i paste this address into internet explorer it works. What is preventing firefox from connecting?
Actually, dchristie, your solution didn't help at all. If I wanted to use IE, I wouldn't have installed Firefox. IE is a good browser, but doesn't have features Firefox has. Also, when Firefox crashes windows can kill it and you can restart it no problem. When IE crashes, since it is so tightly integrated into windows, windows itself becomes unstable and you have to reboot.
-
Contacts on iPhone and iPad not connecting to iCloud
Just set up iCloud today to sync Contacts between MacBook, iPhone, and iPad. Initial setup worked ok. Now, MacBooks is working OK, but iPhone and iPad cannot connect to server. Open Contacts app and icon on status bar at top of screen just spins (for hours). Have tried to disable Contacts sync on iPhone, but but same behavior. Have tried to delete iCloud account on iPad...same. Have rebooted both devices...same. Any suggestions?
iCloud won't sync Gmail contacts, it will only sync iCloud contacts. If he wants to use Gmail for contacts, he should add his Gmail account to his Mac too. If all of the contacts on his phone are not appearing on his Mac after doing this, then some of them must not belong to the Gmail account and would need to be added to his Gmail contacts.
If he wants to use iCloud to sync his Gmail contacts instead, he can copy all of his contacts to iCloud as follows:
Go to Settings>iCloud on the phone, turn Contacts to Off, choose Delete from My iDevice when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer you will need the “Pro” version.) Use the app to back up the remaining contacts on your phone (from Gmail and any other non-iCloud accounts) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section) and set this to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap Gmail and any other non-iCloud accounts and turn off contacts syncing with these accounts (otherwise you will see duplicate contacts on your device).
Open the My Contacts Backup email and tap the attachment to import the contacts from the other accounts back to your device, and to iCloud. -
I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?
Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.
-
I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?
Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.
-
when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.
-
When at a remote location ( not on a network) my ipad cannot connect and print to my bluetooth printer ( hp 100 wbt)
How can I connect to a blue tooth printer when NOT on a network?
Please helpiOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Can the printer also print via wifi?
If your location does’t have wifi use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?
Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Maybe you are looking for
-
Dear Experts, In printing of MB23n , I need to print STR_SUPPL1 and STR_SUPPL2 from ARDC table. I already have ADDRNUMBER. We are using SAP SCRIPT. Please guide me how to insert the following query in SAP SCRIPT. tables: lfa1, adrc. data: begin of it
-
SAP is allowing miro more then one time against the single GRN
Hi All Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen. i want to ristrict his . can any body tel
-
I am about to install Final Cut on my Mac Book Pro, but noticed a piece of advice in a book I was reading. Since I upgraded my OS from 10.4 to 10.5, the book says that to make sure Final Cut works well, I should have done a clean erase and install of
-
When I type, the letters shift (they jump from desired position to another position, i.e.: sometimes, the word jumps to the addressees tab, or some place else like down below the task bar.
-
Issue with live playback while editing - Premiere Elements 10
Hi there, It's been a while since I used Premiere, and decided that I would make a video. I've copied all of the media across and started editing the clip. I dragged the first clip onto the timeline and clicked the play button so I could find where I