HT4356 I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do
I have a cannon mg3120 air printer and it is connected to my wifi but my iPad can not find a printer, what can I do
1. Reboot iPad
2. Reboot router
Similar Messages
-
School starts in two weeks, so I can't see the technician, until then. What can I do I really need my computer. I've already tried command p r.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
When I try to take a print out from documents in my mailbox, it tell´s me that it can not find the printer??. I have just downloaded epson iprint since I have an Epson wifi printer. The iprint did find and successful installed the printer. Somebody who knows what to do?
Chances are you Can only print from the app from the printer maker
And where you are Trying to print from May only work with AirPrint able printers which the epson would not be -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I have forgot my safety guess but apple send me not an email! What can i do?
I have forgot my safety guess but apple send me not an email! What can i do?
Call Apple to help reset your Security Question.
http://support.apple.com/kb/HT5699 -
I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?
Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.
-
I am trying to sync some videos on to my iPad. I have tried .avi, .mp4, .mpeg, .mpeg4 and .flv formats but my iPad is not getting synced. What shall I do?
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
-
I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?
Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device. -
I have a quick time file movie which I was able to open on quick time but now it does not want to open. what can i do? thnaks
Now that i can view the mpg file on my imac using VLC player, how do I save the disc to my desktop?
I need to then cut and save 15 sec visual bytes to my desktop (in a common video file format so that I can enter them into some editing software.
All assistance appreciated
thanks,
Peter -
I have an Ipad4 and now it shows a big sceem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?
Look the 2 images on link below:
https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1LjbmdTry Settings > General > Accessibility > Zoom: OFF
Note: You may need to use 3 fingers to tap and scroll. -
I have a 7200 printer installed in my network, however my new HP laptop can not find it. CD will not work with windows 7, download from HP site did not help. have also tried using IP address to find the printer to no avail ?
There are some Updates on this page. Have you tried them?
Also, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My ipad will not find my printer
My iPhone and iPad won't find my printer why is this.
I will need some more information in order to help out. What model of printer do you have? What make and model of router do you have? Is the connection for the printer Ethernet or wireless? Are the router's and the printer's firmware up to date? What is the OS of both apple devices? Thanks.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
printer not recognised. Printer wirelessly connected to airport extreme. iPad will not find printer
Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again
Maybe you are looking for
-
After upgrading to Yosemite, my MBP crashes everytime I try to open BitTorrent, What´s wrong??
-
Wget returns a 403 forbidden message but IE/Mozilla continues to run jsp
Hi, I have just seen a section of code from a jsp file that looks like this: response.setStatus( response.SC_FORBIDDEN,"getlogout.inc" ); %><%@include file="getlogin0.inc" %><%Basically this is used as part of a security check - if the user has not a
-
System- Mac OS X 10.7.2 2.7 Ghz Intel Core i5 4 GB 1333 MHz DDR3 All files I'm working on are located on my desktop (not on a server or external HD) Bugs: 1. Auto-Select · After working in one layer I use the "Move Tool" with Auto-Select checked. In
-
Hi i am loading cube 0QM_C01 under quality managment. it is loaded from IS 2LIS_05_S290..i cannot find corresponding DS in r/3 side in rsa5. any suggestions how to load it as im using BI 7.0 Thanks Prashant
-
Can I opt to not download iOS 4.2?
As many people on the forums have been experiencing, the 4.2 update is creating problems with my Home button not registering. To fix the situation I tried to downgrade to 4.1 through the very involved process that is there but screwed something up an