HT4356 I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi
I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi.
Probably because it pre-dates Airprint technology. The fact that it has wifi doesn't change anything if it isn't an Airprint-supported printer
Similar Messages
-
I have communicated with apple care every time and they keep telling me there is no problem,so why does it keep crashing. I took it in for repair under warrenty and they told me there was nothing wrong with it yet it crashed again two weeks later and has crashed another 5 times since then,I have to erase and re install each time. It has now crashed again , i have re installed snow leopard and all i get is the spinning wheel and nothing loads..Im over it. I have several mac products including two other imacs that are running fine..
Run Apple Hardware Test on your computer, the next time your machine crashes try running disk utility on the hard drive. You shouldn't need to reinstall the OS each time your system crashes, if that the case then you could have a bad hard drive.
-
I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.Please authorize ADE 3 with same credentials that you used with older version of ADE
-
Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
LizBelieve it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet? -
I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?
I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
So you may not need to install Windows at all. -
I am a new first time user of adobe to convert pdf. files to word, etc. I must add that I am 75 years old and not a computer literate fellow. I have a fairly large pdf file that I want to convert to word so I can cut & paste, etc ? Any & all help will be appreciated.
Haakwine you have posted to the Downloading, Installing, Setting Up forum. Which specific Adobe software or service are you trying to use to convert PDF files?
-
Hi my 4s is only 5 days old and I have the OTTER Box from day 1 and it has turned off by itself and will has not turned back on some help let me know what to do I'm dieing over here
If it is only 5 days old, take it back to where you bought it
and get it replaced. -
Videos won't play. Not YouTube or any other videos (just started today). I also have no sound, keypad clicks, shutoff click, etc. Are these common failures for a three year old Gen 2 iPad?
For the issue with the videos that will no longer work, try closing all apps and then reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
For the issue with sounds, you have system sounds muted.
Check the side switch above the volume rocker on the side of the iPad. Flip it the other way and see if you get sound from the apps, keyboard clicks, etc.
If not, double tap the home button to bring up the task bar at the bottom. In the task bar swipe all the way to the right. Look on the far left side and see if there is a speaker icon. If there is, tap it and see if the sounds on apps come back. Then tap the home button.
You can change how the side switch works to either lock screen rotation or to mute system sounds. You can go to Settings>General>Set Side switch to Lock Rotation or mute. If you choose mute, the switch will turn off apps sounds. Otherwise you use the task bar as described above to mute those sounds.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
I have an iPhone 4S which is a few months old and messaging has started playing up. My friends have been texting me and I'm not getting them all. Any suggestions why?
You might want to contact your carrier on this. They are responsible for routing your messages.
-
I have tried to download Photoshop Elements 10 three times now and it has crashed every time???
I have tried to download Photoshop Elements 10 three times now and it has crashed every time. I checked my settings and the format on my computer is Max OS Extended. I read that 3 other people were having the same problem. Did anyone figure out how to fix this or does Photoshop Elements not run on Mac OS X?
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 9 error(s), 8 warning(s)
WARNING: DS013: Payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failedSfasolo it appears you are installing Photoshop Elements as opposed to downloading Photoshop Elements. For the error you have described I would recommend reviewing Updated installation instructions | Premiere Elements 10 | Mac OS - http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html.
-
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I cancelled a payment through PayPal. How do I update the payment for that charge? I looked at my payment information and it has my credit card information. I'm not sure where to update the payment that was associated with my PayPal account? I am not sure what that paid for? I am trying to process updates on my IPhone & IPad for apps. I have already downloaded.
Hi Xellana, and a warm welcome to the forums!
I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
Sorry. -
I have never had to enter a password to access mail.
However, recently, I keep being asked for password on my ***** address.
Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
But when I attempt to use that pw I still can't get in.
I have no trouble accessing that email account on my mac mini. Just on the macbook.
<Edited by Host>Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things. -
Hi Can anyone please tell me from where I can download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the relevant codes and activation keys but would need to be sure I can obtain the program again before I start. Thank you
Make sure you are dealing with the correct product for the serial number. If the serial number is for a full creative suite then you need to get the suite, not the individual application, and vice versa.
Unrelated to that, in case it helps, here is a link to another site. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.
Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.
Maybe you are looking for
-
Delete Text and images in a pdf.
I want to search and then delete all occurances of some text and specific images in a pdf
-
Creating a standby control file for cloning a standby database
Hi I am in the process of trying to document the cloning of a standby database. I am trying to amalgamate three different documents - one for a normal clone, one for the creation of a SB database, and the other a formal Oracle document - the Business
-
I want to bring in the Motion 3 templates into Motion 5. Alas didn't bookmark prior reading. I don't even care that they show up as templates within M5. (altho that would be nice.) I have 2 computers - one with M3 and one with M5. Somehow a year a
-
Run Allocation Package - Execute formulasError- updated
Hi Experts, I have the following allocation script logic: *RUNALLOCATION *FACTOR=USING/TOTAL *DIM COPAACCOUNT WHAT=[EXPORT_ALLOC_BASIS]='Stat Cases'; WHERE=<<<; USING=COPAVVSCA; TOTAL=<<<; *DIM PRODUCT WHERE=[CATEGORY]='%PRODUCT_SET%'
-
Connectivity between blades in Cisco UCS environment
We're trying to setup a UCS environment for testing purposes, and seem to be unable to establish any connectivity between servers within the UCS. At the moment, the environment has no upstream LAN connectivity and therefore no uplinks defined on the