HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad. Did I just receive a "boat anchor" printer in the eyes of Apple?

I was recently gifted a new Samsung wireless printer Model # ML-2165W and while it works fine with all my computers, I can't make it print from my IPAD. Was I given a "boat anchor" in the eyes of Apple?

It looks like your printer isn't on the list of air print enabled printers. It'll still work, you just need to do some tweaking.
You can see if samsung has any apps to enable printing.
or
You can look into a third party app like Print n Share or Print Central.
Then you can print from your iPad.

Similar Messages

I have just got a iPod 5 gen 32gb and lightning adapter but can't get it to work with my docking station it will charge but not play audio please help??

I have bought a 5th gen iPod and lightning adapter but it won't wrk on my docking station it charges but doesn't play audio? Please help

Does the dock manufacture say it is compatible with the 5G iPod with iOS 6.0.1?
Have you went to the manufacturer's support site? Contacted them?
Try resetting the dock. How you do that depends upon the dock
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.

Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.

Do you have a video card with at least 512 MB of vRAM?
I only have 256 MB vRAM on my older iMac and still have 3D capability in PS CS5, but not in PS CC. The newer versions of PS require 512 MB in order to enable 3D.

Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
Thanks Bazzer50

Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

HT4528 just bought a ringtone app but can not get it to work

just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
Angela

Contact the app developer for support.

HT1848 I just downloaded music on my computer but can't get it to synch with my ipad.

I just download music to my computer, but can't get it to synch with my ipad. Does anyone have a suggestion?

iOS: Syncing with iTunes - Support - Apple

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

Hello pwithero,
The following article details the process of indicating to iTunes the correct location for the affected file.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Allen

I purchased a new computer and transferred itunes, but can't get the podcasts I downloaded after the transfer to sync to my nano

I purchased a new computer and transferred itunes to it but now can't get podcasts downloaded after the transfer to sync with device.

So you have these podcasts downloaded and stored in your iTunes library is that correct? However, they will not sync with the device? Are these video or audio podcasts?
How is your Nano currently configured to sync podcasts? You can check this by viewing the iPod's Podcasts configuration tab in iTunes. To view this tab, plug your iPod in and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the Summary tab that now shows to the right. Look for the Podcasts tab along the top and select it. Here you can configure how and what Podcasts are synced.
If you do happen to make any changes from under this tab, be sure to hit the Apply button to sync the updated changes to the Nano.
B-rock

HT1338 I have the new mountain lion software on my macbook but can't get it to sync with apple tv. How to get the little tv icon to come up?

I can't get my macbook to interface with apple tv. Any suggestions?

Welcome to the Apple Support Communities
Pages for the iPad and Pages for a Mac are completely different, so you have to purchase them twice, one for the iPad and another one for the Mac. The only advantage is that, if you buy another iPhone, iPod touch or iPad, you will be able to install Pages for free on all of them.
As you are running Mac OS X 10.6.8 on the MacBook, you can't purchase Pages from the App Store, so you have to buy iWork '09 on a DVD on Amazon or eBay in order to install it

Upgraded to Mavericks and installed new iphoto but can't get iphoto to work

I have not been able to open my iphoto library with the current version after installing Mavericks and purchasing/installing iphoto 9.5
Here's the system info: iMac (from Dec. 2007)
2.8 GHz Core duo
4 GB SDRAM
OS X 10.9.1 (as of yesterday)
Iphoto 08 (7.1.5) lived on a network drive ( Lacie cloud drive) shared between a pc and a mac.
Upgraded to 9.5 yesterday
I used time machine backup before installing Mavericks and proceeded to try to upgrade iphoto. However, I did not make a backup of my system after this installation and before I installed the new iphoto. Does Time machine backup iphoto files located on a network drive? Does it matter that the backup was made with snow leopard and not Mavericks?
I followed instructions on a thread indicating that iphoto Library upgrader 1.1 should be used to prepare my old library prior to opening with iphoto 9.5.
When I double-clicked the upgrader it gave me this message:
Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
I noticed that the iphoto icon has already changed from orange to blue.
OK- great! So I go to the freshly installed iphoto and try to open my library and get this message:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
Alright, so I click the upgrade button and I get the beachball of death for about 15 minutes and then see a message that says:
Examining photo library- Examining with the beachball of death goes on for another 10 minutes and then iphoto just crashes and closes.
Back to searching through threads- Ah- try option + cmd while opening iphoto to rebuild the database but then get this message AGAIN:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
And so, the cycle continues....
After reading through a few other discussion I discovered that the iphoto library should have been on a drive formated as Mac OS extended (journaled)
So- I format an external harddrive as Mac OS extended (journaled) and proceed to copy the iphoto library (234 GB) onto the external harddrive and after about 30 minutes I received this message:
The operation can’t be completed because an item with the name “iPhoto Library” already exists. I click OK and everything stops and shuts down.
Is it possible to get rid of Mavericks and go back to my original iphoto 08 using the time machine backup? If so, should I then use the upgrader before installing Mavericks and the new iphoto?
At this point I have no clue how to proceed. I am trying not to panic but this process is starting to drive me a little bananas and my brain is slowly, but surely, melting away.
Please help save my sanity. Please.
Thank you.

The problem is the library has been damaged from sitting on the Network Drive, and frankly, returning to the old OS won't change anything, nor will downgrading iPhoto. You're going to have this issue once you try and move the Library, or update it in any way, and - even if you stick with the old version of iPhoto, you're going to start having issues just saving edits, sharing and so on.
So, you're between a rock and a hard place.
I've no idea if TM backs up material on a NAS, but I do know that it can be set to back up externald rives. I'm somewhat surprised that you don't know, as this is your back up system that you created and the easiest route out of this situation. NOw there's only one way to find out.
So, my first effort would be to try restore the Library from TM to the correctly formatted drive:
http://support.apple.com/kb/HT4927?viewlocale=en_US&locale=en_US
will help with that.
If that doesn't work or is not possible, your next effort is to try rebuild the Library to the correctly formatted drive:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
If that doesn't work, then you're recovering the masters from the Library and starting over from scratch.

Installed webutil but can't get it to work - IE just crashes

As far as I cam make out, I followed the installation instructions, copied files to the right places etc for webutil. But when I try and run my form, IE just crashes out with a runtime error. Has anyone else had this problem? I'm using Forms 10.1.2.02 and IE 8.

I seem to be getting somewhere now!
I got past the initial crashing by first of all using the basejpi.htm, and including the jar files in the archive= lines in the config. At runtime I was prompted to accept the RegisterWebutil as coming from a trusted source. I ticked the box 'always trust'. Then I changed my config to use the webutil.htm, and it worked - crashed later, but I got past the initial! I think I might get this to work now. Thanks for the help though especially with the IE settings, as it wouldn't have worked without changing that.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

I'm moderately competent, but can't get exchange to work with the 2 upgrade

My original iPod touch synced perfectly with my Outlook 2003 at work, both contacts and calendar until I updated to 2.0 to enable downloading applications. Now I get the "OutlookSyncClient.exe has encountered an error and must close." Error. I have tried all fixes and will have to move on, unfortunately, unless there’s a fix out there.
This is a corporate email/calendar and I can’t change every entry. It also involves Microsoft exchange, so I’m not sure how the .pst file is involved. Nevertheless. I have tried all the fixes that I can and nothing works. This device has been worthless for the last six months. Clearly something is wrong. I have tried many different computers networked to my account to try and diagnose this. Nothing works.
Any ideas? Anyone?

Hello, sorry to see you are running into this today. Below are some suggestions.
Have you tried uninstalling the following Apple Applications in the following order? After you have done that check out the following directory below.
1. Uninstall the following Apple Software in the following order to help reduce reboots
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-Windows iPod Updater (Name might be different but look for anything with the word iPod)
-MobileME Control Panel
-Quicktime
-iTunes
*Now reboot the computer
*Once PC is back up and running, then go ahead and go to C:/Program Files/Common Files
In this folder if you see an Apple folder. Delete this folder. Reboot one last time. Then download and install latest iTunes
http://www.apple.com/itunes/download/
*Post back as needed.

I downloaded a new version of pages but can't get it to work?

I had an older Iwork 06 on the computer, but can't find serial number. I downloaded newest version of Pages, but computer keeps defaulting to the old version and asking for a serial number. Help? Thanks!

First, open Finder, go to Applications folder and delete iWork '06. Then, open Pages and it will use the most recent version

HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad. Did I just receive a "boat anchor" printer in the eyes of Apple?

Similar Messages

Maybe you are looking for