HT4356 If I use AirPrint to print something from my notes app will the paper come out yellow

If I use AirPrint to print something from my notes app will the paper come out yellow

No, the yellow does not print.

Similar Messages

  • Using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up

    using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up as follows: the first page out is page 2, with 1 on reverse side, next page is page 4, with 3 on reverse side., etc.  This requires that I re-collate every paper I print.  Have tried a few things in set up and re-installing the printer, but still not fixed.  

    I am having the same problem.  Nice to see that HP has not responded.

  • Used to be able to print from my iPad but now when I print the paper comes out but there is nothing on it

    Problem printing from my iPad use to work now the paper comes out empty

    Go into iMessage and Facetime and sign out.
    Go to Settings > iTunes and App Store, log out the person who sold it to you and enter your information.
    Or go to Settings > General > Reset > Erase All Content and Settings and then start from scratch.

  • Why does my printer work but the paper comes out blank. ink cartridges are full.

    My printer sounds like it is printing but the paper comes out blank.  The ink cartridges are full.

    What printer model - there are about a dozen HP Photosmart Premium models including the c309a, b, c, g, h and n and the c410a,b,c,d and e. 
    There are a few things to check - I would suggest running up to three cycles of print head cleaning from the front panel or toolbox.   Do copies also come out blank?  Try the steps in this page, starting at about Solution 6.  Does any ink at all print on the test page? 
    For some models there are firmware updates available that are only delivered through the web connection.  Make sure the printer has been connected and perform any updates that are available for the firmware.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My MG5320 will not print. The paper comes out but without printing.

    My MG5320 will not print. Paper comes out but not printing.

    Hi ts and andrea711,
    We recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to appear on the page.  To do this, please follow the steps located at the link below:
    Print Head Cleanings
    If blank pages still come out of the printer after performing the cleanings, please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

    The printer will not grab the photo paper when I attempt to print a picture.  It works just fine when printing other things, such as text from WORD or something from the internet.  Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
    Any ideas?  Am I doing something incorrectly?  Thanks

    Hi hgr7,
    I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • HT4356 My iPad and printer talk but the picture comes out blank...any suggestions?

    My photo paper comes out blank but my iPad and printer are connected because when I select print from iPad the printer starts working. Only problem is the paper comes out blank.

    Make sure your Canon is using the latest firmware.

  • HT4356 Need help using my air printer and iphone 5s...it prints but the page is SMALL.

    When using my air printer with my iphone 5s the pdf comes out very small. I've tried numerous times to print different pdf files (from attachments in email) and it won't print an 8 x 11 page, only 3 x 5 size. I finally tried again by opening it with adobe and it printed correctly. Is there a way to get it to work without using adobe?

    The paper size would normally be coming from the application rather than some setting in the driver. I've never seen the Generic PCL driver send a request for B5, but then I do use A4 rather than Letter and I don't have a PCL printer at home to check this. But I do think it has more to do with the application/document being printed.
    For the application that you are using, is there are a separate Page Setup menu?
    If the page and document is correctly set to Letter, you mention a wireless secure. If you mean something more than a wireless network that requires a password to access it, such as using https to connect to a remote server, then it could be settings for the shared printer queue. Although these shared printers are usually just an access point (throughport) for the remote client. Still, if you do have some additional network server for this secure wireless network, then this could be contributing to the incorrect paper size call.

  • The print is too big when I print something from a website

    This is probably the fault of my computer & not Firefox but when I print something from a website the print size is too big. How can I change this...

    File > Page Setup = '''Scale''' <br />
    100% is usually best
    If you can't see the Menu Bar with File, Edit, View, etc - hit the '''Alt''' key to temporarily reveal the Menu Bar.

  • Blank paper comes out of printer when using Firefox

    When trying to print bank statement only blank paper come out, switching I.E. allows me to print.

    https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
    See the paragraph entitled - '''Reset all Firefox printer settings'''

  • My daughter accidentally purchased something from an in app purchase, I haven't got the £2.99 in my account until tuesday, and do not want the in app purchase, my account wont log in now even to download free apps. How do I get my account back?

    My daughter accidentally purchased something from an in app purchase, I haven't got the £2.99 in my account until tuesday, and do not want the in app purchase, my account wont log in now even to download free apps. How do I get my account to log in again and function properly, I shouldn't have to wait until I have a meagre £2.99 in my account again do I because I need the app store for other apps etc and updating, even if it is only 3 days I want my account back, I do not want nor did I give permission for the in-app purchase and would be happy for it to be returned/credited back so I can have MY account available for my IPhone.
    Please can someone give me more information or let me know how else I can get my account working again, before pay day on tuesday.
    Much appreciated, Paddy.
    <Email Edited by Host>

    Hello paddyliverpool,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Refund is an option.
    Best of luck,
    Mario

  • HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII  failed. can anyone help. I have been able to print on this printer for

    I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

    "/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
    I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
    2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
    Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
    Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
    (with thanks to Yuengdog1983):
    This issue may be a result of the Computer Name being left empty:
    Open System Preferences and choose Sharing.
    Enter a name for your computer.
    Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

  • Print messages from iphone facebook app

    i would like to print msgs from iphone facebook app,inbox messages,which i hav unfortunately deleted on my computer facebook inbox,how do i print msgs..i have an epson iprint app n epson printer...
    Message was edited by: abi n

    Hi,
    This Menu item only works if you have Buddy Lists  (any other account other than iMessages).
    By default there are two accounts in Messages when you first start it up.
    The iMessages one requires the Apple ID  but the Bonjour one only needs to be Enabled (Check box in the account settings)
    Bonjour is the one that uses the fact Macs can "see" each other on  LAN and then uses this to Instant Messages to other Computers (Macs) on your LAN.
    Once the iMessages account has an ID it should be logged in.
    In the Main Window select the "To" spot.
    Type in your name *as it appears in the Contacts App > My Card.
    Select your iPhone Number.
    Send an iMessages to your iPhone Number.
    The main window should then show the sync of the received message of the iPhone  making it look like you are talking to yourself.
    If you have not already the next step is to add the Apple ID in use in iMessages on the Mac on to the iPhone Settings for Messages there.
    this then links the iPhone and Mac for iMessages purposes.
    Next in iOS 8.1 and Yosemite you need to enable the "Text Forwarding' on the iPhone. This (if you are close enough to your Mac) should make the Code Number appear on the Mac version
    Type the Number into the iPhone.
    Now they should "sync" SMS messages.
    Summary.
    You can't tell other than trying to send an iMessages whether the account is logged in or not.
    From what you posed I can't be sure if you have done the pairing.
    9:50 pm      Thursday; November 6, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT4009 I would like to make an in app purchase using my $20.00 credit that I have on I tunes. I am using my  i phone5. It does not give me the choice of using the credit that I have, only a credit card. How can I use the credit for the purchase??

    I would like to make an in app purchase using the $20.00 credit that I have on itunes. I am using my i phone5. It does not give me the option of using the credit that I already have, only of using a credit card. How can I use the credt that I already have instead of a credit card?

    Is Settings > General > Restrictions > In-App Purchases: ON (green)?
    Some In-App Purchases works only with credit card.

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

Maybe you are looking for

  • ITunes wants me to set up iPod Touch again or restore it or eject it???

    I bought this iPod Touch only two months ago. And since this is my second iPod (the first was a 5 gen that I had had for a couple years), I only did the initial iTunes 8 update I had to do when I bought it. Since it had been working fine, I didn't do

  • "RT Set date and time" does not set seconds in UTC mode

    Hallo, I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value. Even the vi shows this behaviour: I set up a vi i

  • Just bought new imac, should i update things b4 i install Logic ?

    Just bought a new iMac 27'' i7. Ran software update and a bunch of stuff showed up in the list: Currently i'm on 10.6.2 Software update list shows 10.6.3 Java 10.6 update 1 iTunes Airport Base Station update Remote desktop client iLife Support Safari

  • To JPG - JPanel(with JTable and g) on JScrollpane

    hi need help on this one, i have a JPanel inside a scrollpane that i want to convert to JPG. This JPanel contains Tables labels and some drawings. everytime i convert it to JPG the only thing that shows up is the one that im seeing in the screen mean

  • Guest WiFi not working with DHCP disable

    Hello, I am using my "server" for handling DHCP requests, in the past i used my router to perform this task. After disabling my DHCP server on the router i found out my guest WiFi is not working anymore. It seems it keeps searching for a DHCP server