HT4356 Need help using my air printer and iphone 5s...it prints but the page is SMALL.

When using my air printer with my iphone 5s the pdf comes out very small. I've tried numerous times to print different pdf files (from attachments in email) and it won't print an 8 x 11 page, only 3 x 5 size. I finally tried again by opening it with adobe and it printed correctly. Is there a way to get it to work without using adobe?

The paper size would normally be coming from the application rather than some setting in the driver. I've never seen the Generic PCL driver send a request for B5, but then I do use A4 rather than Letter and I don't have a PCL printer at home to check this. But I do think it has more to do with the application/document being printed.
For the application that you are using, is there are a separate Page Setup menu?
If the page and document is correctly set to Letter, you mention a wireless secure. If you mean something more than a wireless network that requires a password to access it, such as using https to connect to a remote server, then it could be settings for the shared printer queue. Although these shared printers are usually just an access point (throughport) for the remote client. Still, if you do have some additional network server for this secure wireless network, then this could be contributing to the incorrect paper size call.

Similar Messages

I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?

I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?

It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

Need help using LabVIEW 7.1 and data socket to transfer images

I need help transferring images across a company network using: LV 7.1, IMAQ 3.0 and a PCI 1407 image aquisition card. I am trying to use datasocket to transfer video image across a company network. I have attached sample vis. Thanks in advance for your help.
I. Cyr
Attachments:
Vibration Chamber Vision_Cyr.llb ‏129 KB

Hello –
Something that you need to consider is the fact that when you are sending an image over Data Socket, it is not really the image what is being transferred but a pointer to the image. Please take a look into this Knowledgebase.
Also, you might find this Example Program useful.
Hope this helps.
S Vences
Applications Engineer
National Instruments

I need help really dont have money to buy a new phone but the apple symble keeps blinking on and off

i need help really don't have the money to buy a new phone but the apple symble keeps blinking on and off

Hi bellaluv2912,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If your iPhone isn't responding or starting up successfully, or is displaying an Apple logo and restarting, you may find the troubleshooting steps outlined in the following article helpful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden

I am trying to print out information on a Google Maps page. I have the print setting on fit to width but the page does not print that way and some of the page that would normally show on page 2 is missing.

The page prints out fine on Internet Explorer, but not on Firefox. 2 pages are supposed to print out but only 1 prints. Also it does not fit to width even though that's the setting.

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

How to place the print and zoom link on top of the page in discoverer10g

I created a table format report and I want to place a Print and zoom link on the top of the page also I want to display the sum of a column in the top of the page,
How to go for it.
Message was edited by:
user575682

Wrong forum.

What kind of electric adapter/converter do I need to use my MacBook Pro and iPhone in Ireland?

I'm going to Ireland and want to take my MacBook Pro and my iPhone with me. There are a wide range of adapters and converters on the market but I need to know specifically what I need to access electric power while in Ireland. Do I need an adapter of some kind, or do I need only a converter of some kind, or do I need both?
Thanks for any help anyone can give me.
Bob

Your existing AC chargers are auto-switchable between 110 or 230 volts. You will probably need an outlet adaptor that you can purchase in most AAA travel stores or local computer shops. Or you can purchase Apple's World Travel Kit.

Need help using iErase to zero out iphone 3GS

I'm about to buy an iphone5 and need to wipe my iphone 3GS. After backing it up on itunes, I restored the old iphone to erase everything. I had planned to then install iErase to zero out the free space. Here's my problem. After I restored my phone I couuldn't figure out how to put iErase back on it. While in itunes, I selected the iErase app to install and hit sync. Itunes proceeded to sync everything back onto my iphone (apps, contacts, etc.). I must have missed a step.
I tried to restore again. After this eraseed everything, I connected it to my Mac and itunes started to automatically back up my now "restored" iphone despite the fact that I have automatic back ups deselected. It eliminated my previous backup that had all my stuff. Fortunately I was ables to select an older backup to restore and was able to retrieve my data.
This has been a major pain. I need to do all of this before I trade my phone in at AT&T when I go to buy my iphone5. Can anyone help?
Thanks

Because that doesn't really erase the content. It just designates it as free space. Anyone who knows what they're doing can still find and retrieve all the "erased" data unless it's been zeroed out. IErase replaces everything in the free space with zeros, thus makng it impossible for anyone to find and retrieve the data.

Need help. i updated to ios8 and i am stuck in activating the phone.

I updated my Iphone5 to IOS8 and now i am stuck in activating the phone. i bought the phone directly from my provider.

Hi there elmafromjeddah,
You may find the troubleshooting steps in the article below helpful.
Get help activating your iPhone
-Griff W.

Need help with itune 10.7 and iphone 3gs, ios 6.

Hi,
My husband dropped my old computer that my itunes was on. My iphone is 3GS that was using IOS 4.3.2 that it was synced with.
Got a new computer and downloaded itunes 10.7.
Was told to backup my iphone on itunes, update my iphone to the latest IOS (6) then to restore from backup.
My husband did that but he feels something happen with the restore from backup.
First we can't add any of the app's or songs to the phone or to get it to sync to itunes.
It will not let us apply only revert.
Any thoughts?

Got it to work by following a "More Like This".
Held down both the home and power buttons until the apple icon showed up.
Waited until the apple icon went away the pushed the home button and slid to unlock.
Hooked up the phone to itunes and surprise, iphone and itunes synced up!

My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

Re: Beginner needs help using a array of class objects, and quick

Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
Is there a way to discard and replace a post (with html source code) in the Sun forum ?
Thanks for your help.
Chavada

chavada wrote:
Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
[code]
public class Foo() {
* This is the bar method
public void bar() {
// do stuff
}[/code]

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

Could I use a USB hub to connection both a printer and an external hard drive to the time capsule?

I am planning on purchasing a new router. The Time Capsule looks amazing. However, I have Macs and PC's in my how. So, I need to know if I can connect a printer (for all computers) and external hard drive (for the PC's) by way of a USB hub on the Time Capsule. I've read that you can do this with the Air-Extreme.

Couple of comments:
You will need to use a powered USB hub to connect multiple devices to the USB port on the Time Capsule
The hard drive for use with the PCs will not be compatible for use with the Time Capsule if it is currently formatted for Windows NTFS, which it likely may be if you have been using with the PCs.
Same info applies to the AirPort Extreme.
The following hard drive formats would be supported:
Mac OS Extended (Journaled)
MS DOS FAT32

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this?

I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this? I am a total MacBook nube and can use any help you may offer! Thank you so much.

How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart from Safari, I get this print dialog box:
(Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
A

HT4356 Need help using my air printer and iphone 5s...it prints but the page is SMALL.

Similar Messages

Maybe you are looking for