HT4356 When I try to set up my itouch I get an error message itunes store unknown error 310. I don't have wieless so I hooked the ipod touch up to the computer with the USB port when instructed. But then get the error message and can not get any further.
Error message 310 is happening on my mac book and I am unable to set up my new itouch.
If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)
Similar Messages
-
I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.
No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!
-
I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select <General> there is no <Software Update> button to choose from. How do i update my Ipod to the new IOS system?
You have to hook it up to a computer and update it to ios 5 and then there will be a "software update" button.
-
I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?
Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.
-
When I try to go on the internet with my iPad 2, the whole section is greyed out. I can see the webpage, but can not navigate any further. I do have wifi access, though.
Try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks
http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation -
i own a ipod touch and a ipad2g but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help
Ive never used that but I think there is a find ipod app. But im not sure. The ipod might have had to have it on?
-
i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????
It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.
-
I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?
Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call
Is there a case on the iphone?
If so, then remove it and see if that solves it.
Otherwise, make an appointment at the genius bar. -
hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?
I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported. -
When I try to download my updates it keeps saying cannot connect to iTunes store please help I'm going mad!
a lot of people have posted about this and i have seen one weird thing fix this. people said they where going into date and time under settings and changing the date to some time in the future and then going to the itunes store and it would give them an error that there date and time was wrong. then all you need to do is go back and set the date and time right and go back to the itunes store and try again.
Im not sure why this did the trick but a bunch of people said that this helped them out..... Weird i know
You might want to see if it fixes your problem. -
My ipod touch 4th generation isnt charging with my cable.
When i use my dad´s cable, it charges.
But, however, after it´s fully charged (which takes strangely only a minute), i use it for five seconds and then it goes off.
What should i do?- See:
iPod touch: Hardware troubleshooting
- Try another cable if available
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
How do i remove the Icloud Lock on a Iphone that's Clean and can not get in touch with the oraganal owner
thers no you cant put a reset tool on your site to reset phones thats not stolen or in lost modeit's an anti-theft measure DAH Its Not Stolen SO what the crap Then. I wish thay would Remove it From there Ios and Redo it so it Only Locke if you Report it Stolen or enter Lost Mode. BC thers A lot of PPL that abuse it.
Maybe you are looking for
-
File Adapter - special character in Filename
Hi, i have a question concerning file adapter. Scenario: we are polling files via file sender adapter (FTP). Problem: if the filename contains a special character, an error is thrown with 'The System cannot find the file specified' Scope: Special cha
-
JCLoginDialog does not work correctly in JDev 10
Have anyone got the JCLoginDialog to work with JDev 10g and JDBC? I have a JCLoginDialog generated by JDeveloper 10g, and have made the appropriate changes as described in the JDeveloper help. (Removing password and deployPassword entries in bc4j.xcf
-
hi i would like to know the difference between Seeburger's VAN and AS2 adapter.
-
So I went on my facetime on my IPod and when I log in it says: Facetime Activation An error has occurred during activation. Try again. So I did all the thing that I thought of: Shut down the device Went on my wifi and went Off and then back on. Turne
-
RTMT - Multiple Installs, Same version?
Hello, I've done some reading about mutiple installs of RTMT but can't get it to work right. All of our UC Products are at 8.x. They all seem to use the same version of RTMT. When I try to use the version that was downloaded from Presence, I get a