HT4356 When printing from the iPad how to control how many pages of the document to print?

When printing from the iPad, how to control how. Any pages of the document to print?

You got me curious (even though I've never used coupons.com, and I have an AirPrint printer).  So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad.  You could print to a non-AirPrint HP printer as well using an app from the iTunes Store.  But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do.  For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email.

Similar Messages

  • Adobe will start up, and tell me how many pages are in document, then crashes.

    I am using MAC 0S X 10.4.11.
    I cannot open any pdf files.
    I downloaded latest version of Reader, but it is still happening.
    Tried Adobe support, but they want $39.
    Any help would be greatly appreciated...

    http://www.kimberlyeinmo.com/classes/
    This the site. The tulip quilt is what I would like to enlarge and print without the whole document.

  • HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

    How is the photo size affected when importing from the SD card to ipad (2) ?
    If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
    Thanks.

    To re-size, you can use:
    https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

  • How do I save "Sent" messages when sending from the ipad

    How do I save "Sent" messages when sending from the ipad2?

    By default sent items should be saved in your Sent folder. For IMAP type accounts you should be able to change that by selecting the account in Settings > Mail, Contacts, Calendars , then selecting 'Account' on the popup for it and then 'Advanced' at the bottom of the next popup

  • When using imovie for Ipad, how can I fast forward a project to cut the length down?

    When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

    Jon,
    It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
    Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
    Good luck,
    Hunt

  • When saving from the print menu to PDF to iBooks, it saves it as unnamed document.

    When saving from the print menu to PDF to iBooks, it saves it as unnamed document.
    Would like to be able to give it a name before saving it, or at least have a rename function in iBooks.
    Can use Preview and rename it in Downloads and then move it to iBooks.  Very cumbersome.
    Thanks.

    When saving from the print menu to PDF to iBooks, it saves it as unnamed document.
    Would like to be able to give it a name before saving it, or at least have a rename function in iBooks.
    Can use Preview and rename it in Downloads and then move it to iBooks.  Very cumbersome.
    Thanks.

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Hi,my little Grandson somehow deleted my gardens of time game from my iPad,how do I retrieve it as I have spent lots of money over the last 4mnth.

    HHi,my little Grandson somehow deleted my gardens of time game from my iPad how can I restore it as I have spent lots of money on this .

    Any app can be re-downloaded for free from the App Store - however, depending on the specific game, you may not be able to recover your game progress other than from a backup.
    Matt

  • TS1702 An app has disappeared from my ipad, how do I get it back on when syncing did not do it?

    I downloaded the cooking light app but it has disappeared from my ipad, how do I get back?  I have already tried syncing did not work.

    Use your iPad's Search screen to locate it. If it's truly no longer present, then just download it from the App Store again.

  • How long would the iPhone 4s battery last when shipped from the factory and going to be opened on Christmas?

    How long would the iPhone 4s battery last when shipped from the factory and going to be opened on Christmas? Or how long does the iPhone battery last when it is off? Or would I activate the iphone 4s with a flat battery?  Thankyou

    Thankyou!

  • Message- Print No pages from the document were selected to be printed

    I have had this application for some time, simply never used it.  Last night I tried converting a PDF file to word, unsuccessfully, I might add.
    Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
    Print
         No pages from the document were selected to be printed message
    How do I reconfigure my settings to preview rather than defaulting to PDF?  Kindly advise.  Cheers.

    I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
    G4 Power book 867Mhz   Mac OS X (10.3.9)  

  • How do I get MFP M476dn to scan from the document feeder from the computer?

    How do I get my HP Color LaserJet MFP M476dn to scan from the document feeder when initiated from the computer? The printer will scan from the document feeder if it is initiated from the small screen on the printer, however when I try to initiate from the computer it scans a blank page. The printer acknoledges that the document feeder is loaded.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT4859 I lost some of my books when I restored my iPad how do I get them back?

    lost some of my books when I restored my iPad how do I get them back?

    You can re-download content purchased from the iBook store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iBook store (availability varies depending on location) using the purchased option at the bottom of the screen after you tap the store button in the top corner of the iBook app on your iOS device.
    If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

  • How do i add photos from an iPad to a Wiki Server wiki page?

    How do i add photos from an iPad to a Wiki Server wiki page?
    When i click edit in a wiki page the menu at the top is different than the desktop version and there a no attachment buttons, no image buttons or video.
    I tried copy pasting from photos but it just says Loading and the image does not appear in the text.

    The transfer of photos from your computer via the iTunes sync/transfer process is a one way transfer process only - from your computer to the iPad. The iPad is not designed or intended to be a backup storage device. Photos transferred from your computer are optimized for viewing on your iPad - the resolution of most or all of these photos is reduced on your iPad, which is why transferring these photos in the opposite direction is not supported.
    There are some 3Rd party paid utilities that provide for transferring these photos in the opposite direction, but such utilities are not supported by Apple and the original resolution of the photos will be lost. Here is one such utility that is Mac compatible.
    http://www.ecamm.com/mac/phoneview/

  • I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first

    I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first phone?

    it's meant to work like that
    so if you receive a message on your iphone you also get it on your ipad or ipod touch
    to avoid it use separate appleID for each device
    or turn off imessage on 1 or both devices in their settings
    but that will not fix the issue that 2 devices using the same appleID will never be able to facetime eachother
    the appleID is a unique handle for 1 user only

  • Itunes has disappeared from my ipad. how to get it back?

    itunes has disappeared from my ipad. how to get it back?

    You don't have iTunes (per se) on the iPad. There is a Music app which is an orange icon. Native apps cannot be deleted, but in the event that it has somehow disappeard you could go to Settings > Reset > Reset Home Screen Layout.

Maybe you are looking for

  • Restore from backup not offered

    So I just got a shiny new iPhone 4, replacing my 3GS. iTunes will not give me the option to restore from the old phone's backups. I'm running the latest version of iTunes. I've tried rebooting my computer, syncing/backing up the old phone multiple ti

  • How can I turn off auto formatting whilst working in the SQL Worksheet?

    Friends, Hope you can help with a quick question. Is it possible to stop the auto formatting of SQL statements in the SQL worksheet? e.g. When I type select * from dual it auto formats to becomes SELECT * FROM DUAL when I hit return. I am using SQL D

  • First execution of query is always best than all the following

    I have a static query that I execute in sql*plus in the same machine as the database and all the time, the first execution is faster than the following executions and it driving me crazy! Any help is appreciated... The database is Oracle Database 11g

  • How to relate or tie a Quotation to a Sales deal

    Hi friends, I created a Promotion and then a Sales deal included in the promotion. The sales deal has a price condition customer/material and I can have another sales deal with other different price condition for the same customer/material. The quest

  • Editing RAW (*ORF) in Photoshop10

    Hi i have photoshop elements 10 and cant edit RAW files in the ORF format, although my camera (EPL5 Olympus) is in the list. I tried to download and install a recent RAW plugin, but this didn't help. Tips are very welcome!