HT4362 Screensaver shows the same photographs every two or three minutes while I have 1600 pictures to select.

With Apple TV Screensaver ............ I have 320 pictures from which to select: Why do I get the same pictures every two or three minutes? Either very poor software engineering my Apple or arrogance by Apple TV. I set time delay for 10 minutes to allow all pictures to load before setting actual time delay at 2 minutes. The feature is worthless with this format,

That is probably correct...
If you are trying to extend them in the same direction, this will not work....
See this Apple doc:
http://support.apple.com/kb/HT4259
Also see this:
Wirelessly Extended Network (802.11n)
If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
To create a Wireless Extended Network you must place the extended Wi-Fi base station within range of the primary Wi-Fi base station.
Extended network range considerations
In the above example the primary Wi-Fi base station ➊ is out of wireless range of the extended Wi-Fi base station ➋, therefore the extended Wi-Fi base station cannot join or extend the wireless network. The extended Wi-Fi base station must be moved to a location that is within Wi-Fi range of the primary Wi-Fi base station.
Important Note
If another extended Wi-Fi base station ➋ is placed between the primary Wi-Fi base station ➊ and the extended Wi-Fi base station ➌, the extended Wi-Fi base station ➌ will not allow clients to join it. All extended Wi-Fi base stations must be in direct range of the primary Wi-Fi base station
Please read the last Important Note above...........

Similar Messages

I have totally "uninstalled" what I had and then reinstalled the newest version of itunes. Still...... First, when I click on the itunes icon to load it takes the program anywhere from two to three minutes to load. None of my other programs take this

I have totally "uninstalled" what I had and then reinstalled the newest
version of itunes. Still......
First, when I click on the itunes icon to load it takes the program anywhere
from two to three minutes to load. None of my other programs take this
long.
When in the itunes program I can be moving around in my library and itunes
when choosing a song or songs, choosing file, edit, etc,. whatever command I
choose it just suddenly stops. I can issue five commands and watch each one
respond in 30 second to two minute intervals. I can issue several commands,
even shutting down, and it will do all but takes several minutes to do so.
My itunes program was working fine when this problem suddenly arose.
Terry

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99436)

HT1657 Movie keeps freezing and not playing. Every two or three minutes? First time with this probel, why is it happening?

Have rented a movie. Trying to watch through iTunes and it keeps freezing! have watched many this way without this issue at all. Whay is it happening now?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

The History tab at the top of the screen. When I click it it shows history but it shows the same thing every time and wont change. Even when i click "all history" and delete it it is still there. How do i delete it?

Could you be specific where the files to fix this are?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Why is Apple TV showing the same computer multiple times for Home Sharing?

Why is my Apple TV showing the same computer multiple times for Home Sharing? Also have connectivity issues. Sometimes will lose signal.
JonRod's music
JonRod's music
JonRod's music
JonRod's music
JonRod's music
I recently updated to Yosemite and never had this issue before.

I'm not 100% sure of the ins and outs, but it's some sort of known issue between Yosemite, Airport and wifi. All you can do is wait for a fix and keep restarting your equipment as and when needed, unless you have the ability to connect your Mac via ethernet.

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

Two Different Imported TIFFs Show The Same Image in Premiere Pro

I noticed sometime ago that some imported TIFFs with alpha channel are not showing the correct image. Recently I upgraded to Premiere Pro CC (for PC) to see if such issue was solved, however it is not.
Basically just importing the TIFFs into the project panel results in Premiere showing the same text even though the actual TIFF files contain different text. This is quite bizarre. No other software (including FinalCut Pro) displays such odd behavior.
I have uploaded the two TIFFs that replicate this issue consinstently here: https://drive.google.com/folderview?id=0B2IT1EAcyLlBZXRlMDkxNzY3d1U&usp=sharing
To replicate, just create an new empty project and import these two TIFF files. You will notice that both show the same text within Premiere while outside they indeed show the different data.
Anybody has any clues on why this is happening and on how to solve it?
Thanks in advance for any help and clues.
Valerio

Thanks for your reply.
At this moment we can't export PNGs with an Alpha channel so we are stuck with TIFFs.
It is a bizarre issue though.
Here is a Dropbox link for the images, seems Google Drive download links are buried deep:
https://www.dropbox.com/sh/gktixc0cdbhr3oz/jPCI8yciY-

I have two iphones ...why shows the same pictures

i have two iphones ...why shows the same pictures

Are you referring to the Camera Roll, or the Photostream, what?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

HT1349 I have i tunes on two computers using the same apple id but each library is not showing the same songs

I have i tunes on the computer with over 1000 songs on it and i also have loaded i tunes on my laptop as i want to get rid of the computer but the library on the laptop is not showing the same songs
how can i transfer the songs from the computer to the laptop

How to move your iTunes music to a new/different computer.
http://support.apple.com/kb/HT4527

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

Sub Report in Table, always showing the same data

I created a main report with data from a dataset. The DataSet has a column: @Region_ID. The Main Report is Page-Grouped by this @Region_ID and shows a tablix with some datarows foreach region.
I now want to include a subreport into the table and pass the parameter @region_ID to the subreport, which also calls a procedure including the passed @region_ID. I set the @region_ID-Parameter to "always refresh"
I added a textbox on the subreport to display the values which has been passed to the subreport.
I now have a multipage report, with a page for every region. The subreport displays various @region_ids in the textbox, but the data for the subreport itsself, shows the same data on every page. It seems like it has called the procedure only once, with the
first @region_id, and now displays this data on every page, allthough it does not match.
Any suggestions what I did wrong?

Hi tkrasinger,
According to your description, you have the issues on displaying the parameter in subreport. It only shows the first value of the parameters. Right?
In Reporting Services, when we execute a procedure with parameter, this procedure will only be executed one time. This is the reason why it shows the same value in your subreport.
In this scenario, we can just right click on the textbox of region_id, go to
Texobox Properties -> Action -> Go to report. Select the subreport, add the region_id as parameter in
Use these parameters to run the Report. When you click on the textbox, the region_id will be passed to the subreport. So that the value will be displayed dynamically in the subreport.
Reference:
Add a Subreport and Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSDT Schema Compare keeps showing the same objects as different..

Hi,
When comparing a database to my project using Visual Studio 2012 SSDT I get several stored procedures marked as changed. The body of the procedures is identical, but two properties are highlighted as different when expanding the object:
IsSelf (false on the DB vs true on the project) and User (dbo on the DB, needs to be added to the project).
The procedures have the option "with execute as self" both in the database and in the project as part of the body.
I have not found what needs to be done so these differences are applied to the project and never appear again. Tried changing some options on the schema compare but didn't found one that help.
Some forum suggested dropping the objects and re-creating them but I don't want to loose the history of changes on TFS.
Any suggestions?

Hi Daniel,
Since you have posted this issue to the SSDT forum here:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5c9c5c47-64ac-4af4-9104-c9500dc8cf52/ssdt-schema-compare-keeps-showing-the-same-objects-as-different?forum=ssdt#5c9c5c47-64ac-4af4-9104-c9500dc8cf52
I will move this thread to the Off-topic forum, thanks for your understanding.
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

A number of imported photos from iphoto in imovie project all show the same image whilst the preview before dragging them in is correct. What could be the problem?

A number of photos from iphoto used in imovie project all show the same image when playing back. The previw when clicking and dragging them and also the pictures in the storyline. Yet when playing the clip a previous immage keeps on appearing. What could be the problem?

You created a mess and there is no solution - with the actions you have taken those photos are gone unless you have access to them from some other source - they existed in two place - in your iPhoto library and on your backup drive - you have traded the backup drive and restore an earlier iPhoto library so all you have is what you have
LN

HT4362 Screensaver shows the same photographs every two or three minutes while I have 1600 pictures to select.

Similar Messages

Maybe you are looking for