HT4367 Apple TV not working after software update

So frustrated. Apple TV wouldn't download my tv programme so I updated the software in case that fixed it. Now I have the 'connect to I tunes' picture on my screen. I don't have a mini USB or a computer (only an iPad) anything I can do?

Welcome to the Apple Community.
You can do this on a friends computer, that has iTunes installed.
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Similar Messages

  • Apple tv not working after latest update

    apple tv not working after installing latest update.

    I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
    how can I do a roll back on my Apple TV?

  • Most applications are not working after software update-HELP!!!

    HI,i have a 4 years old macbook which i upgrade couple of month ago with snow leopard to use it with my iphone...everything was fine,all applications were working until i did the software update today!!!now almost NOTHING works,no skype,no itunes,no msn..etc..when i try to open an application,it shuts down!!!ANY IDEAS???

    The normal best practice for any update:
    backup
    repair your system
    insure you have a working bootable backup clone
    restart once in safe boot mode
    and only then apply updates
    repair permissions (but ONLY from current system version, not from earlier version, so skip using original OS X Snow Leopard DVD even)
    Also check the "Using Snow Leopard" forum. There are always a few/some who seem to have problem, but unless you have something that 'broke' and does not work with this update, it was an underlying issue, "waiting to happen" so to speak.

  • Built in iSight not working after software update!

    Last night, I updated front row, quicktime, and iTunes via the software updater. Now nothing is recognizing my built in camera (iChat, photo booth). It says there is no camera connected to the computer. Also, software update isn't working. Does anybody have any idea what could have happened and how to get it running again? Thanks!

    NikoM2008 wrote:
    Installing the combo update - as you suggested - did not solve the problem. Any other ideas? The iSight is still not being recognized by the system profiler.
    Here is what I suggest you do next.
    System Profiler is a pre-Lion term.  If you are really using OS X 10.7.3, you need to use the "System Information" utility. 
    After you launch "System Information", click the "USB" item in the "Hardware" item of the System Information window's sidebar.  (If the reveal triangles are pointing to the right like ►, click on it so it points down like this ▼ to find the USB item.)  Then look under each USB bus item in the "USB Device Tree" for your camera.
    If there is no iSight or FaceTime camera listed anywhere in your "USB Device Tree", verify that you used the correct PMU/SMC "reset" procedure for your particular Mac model.  If your camera is still not recognized in System Information", yours is most likely a hardware problem that will require a professional fix.
    Then contact Apple or an Apple-Authorized Service Provider for service.
    Unless you have a current backup, make one before giving your Mac to the repair technician.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Phone not working after software update!!

    i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

    Hi and Welcome to the Community!
    Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Microsoft office 2003 not working after software update

    I tried opening up my MS Word and Powerpoint programs last night by clicking on their icons.  It did not open.  However, I opened the programs a few weeks ago when I created several documents but now nothing.  But at the same time it does open my existing files using these programs.  And when that's happened, I am able to close the existing file and do a FILE: NEW and save with no additional issues.
    I have a feeling that the most recent Software Update 2011-002 is to blame.  Just like when previous versions were to blame when it disabled my previous version of Photoshop.  Also, just as the last Safari update a while back still continues to cause problems for me when I try to check my email on AOL for Desktop for Macs forcing me to go directly to www.aol.com over the web.
    What can I do to remedy this problem without having to purchase an updated version of MS Office?  I personally don't believe the latest version of MS Office will work on my laptop because it DOES NOT have the Intel chip.  Unfortunately, I purchased my laptop just prior to the Mac Intel processors came out on the market. 
    In conclusion, each time the program crashed or stalled when I tried opening it multiple times I sent a report to Apple.
    Any help will be greatly appreciated.
    Send me an email if necessary.  I don't always log into the Apple site.
    Thanks, Christie

    There is no Office 2003 for Mac
    http://www.microsoft.com/mac/downloads

  • Scan to email not working after software update

    I got a software update notice on printer yesterday and after that scan to email has stopped working. its EXTERMELY slow to connect and dont work at all. 
    I spent an hour restarting and resetting router and printer, and nothing has helped.
    Please fix the new software update.

    Hello Dexter123,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to scan to email.
    Please click on the following link for instructions on how to  Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers.
    I suggest that you go through the entire document on the Scan to Email section just in case a setting has been changed. 
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Navigation system is not working after software update

    Hi ,
    I am currently in india and after update of IOS software, my GPS is not working. Please suggest me how to fix this problem.

    Not that it's much help but we are having the exact same problem. When accessing profilemanager we are redirected to the wiki page whether wikis are turned on or not.

  • Scanner samsung scx-4300 does not work after software update v 2.3

    hi everybody,
    i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
    I'm no longer able to scan from my Samsung SCX-4300
    on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
    is there a way to uninstall the software update?
    thanks.

    What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
    If  I delete the following:
    - Samsung folder in /Libraries/Printers/
    - Samsung Scanner.app in /Library/Image Capture/Devices
    Will it remove samsung driver for printer and scanner?
    If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
    note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

  • HP LJ 1300 not working after software update yesterday

    LJ 1300 crashes as soon as print button is clicked after yesterday's software update. Can anyone help please?

    Hmm, gave up on hp injets because this silly "feature" long ago. There was a way to get around that & have it print, but forgot how, sorry.
    Really long shot... is your Date & time on the Mac correct?
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Apple tv not working after new update

    Installed Apple TV update today and after the update was completed it showed the picture of hooking the lighting cable to iTunes.  How can this be done on Apple TV?

    Welcome to the Apple Community.
    You can do this on a friends computer, that has iTunes installed.
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Apple TV does not work after software update

    After being prompted and loading (I think) the newest ATV update all I have on my TV screen is the iTunes icon and underneath that an icon of a USB cable icon.  When the power is plugged in the ATV status light blinks continuously.  Please not my home share is turned on.  What can be done to troubleshoot and solve this problem?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.

  • Apple TV not working after update

    My Apple TV is not working after an update, shows an icon on my TV with an Apple USB pointing to the iTunes logo, after a minute it then goes blank and has "no signal" listed, worked fine before update, this version is 2nd generation I think, its black 2010 maybe '11. I have the HDMI, a non-Apple brand, plugged into my receiver and its on the correct setting. Can anyone help?

    The update installation failed.  It needs to be connected to iTunes on your computer via a USB cable to install the firmware agian.

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

Maybe you are looking for