HT4367 takes time to access programs on the apple tv main menu

takes time to access programs on the apple tv main menu

Hello, Msk5speed. 
Thank you for visiting Apple Support Communities. 
Sometimes a simple power cycle of your Apple TV and router can resolve this issue.  If those steps do not resolve the issue, take a look at the attached two sections below. 
Check the connections and inputs
Make sure the cables between your Apple TV and TV are connected properly.
Securely connect the power cords for your Apple TV and TV to a working power source.
Turn on your TV and switch it to the correct input.
Restart your Apple TV.
If the issue persists, see the steps related to your issue below.
Troubleshoot network issues
Troubleshoot Wi-Fi networks and connections.
Switch between wired and wireless networks.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Cheers,
Jason H. 

Similar Messages

  • When I try to restore my iMac on Mavericks with Time Machine it stalls on the apple logo

    After trying to restore through time machine it hangs on the apple logo with the spinning disk below it. I have left it for 3 days nothing happens. So I just reinstalled Mavericks and it works but its seems broken. Most notable is iPhotos, when I open certain photos I get an exclamation mark, and some videos give me error code OSStatus -54. I have rebuild by holding option key but nothing. I have downloaded library manager but I get a ton of errors. Please help.

    Hi Supermani,
    I have the same situation after my internal hard drive stopped working and was replaced.  Everything seemed to migrate okay from my time machine back up, apart from iPhoto library.  All the photos since February this year give an exclamation mark and all the videos give the error code OSStatus -54.  Rebuilding hasn't worked and neither did library manager.
    With the restore, I updated from iPhoto 8 to 9, so the library had to be updated.  I am just trying a new restore of iPhoto Library, which I'll try to open with my old version of iPhoto 8.  I'll let you know how I go.  If you find any solutions, please post them!
    Tom

  • I recently updated a app on my iPad 2.it asked me to turn on an off my iPad so I did .now every time I turn it on the apple logo appears then it automatically shuts down an do the same untill the battery's gone ?

    I recently updated a app on my iPad 2.it asked me to turn it off then on so I did .now every time I turn it on the apple logo appears then it automatically shuts down an does the same untill the battery's gone ?

    You probably need to restore your iPad now. Pay attention to the last part of this kb article where it explains about using recovery mode. You may need to restore the iPad using that method.
    iTunes: Restoring iOS software

  • Quick Time Player don't read the Apple Intermediate Codec

    Hi there:
    I have updated to Mavericks and now Quick Time Player don't read the Apple Intermediate Codec, needs convert the movie to Apple ProRess 422.
    I've installed Final Cut. Any ideas?
    tnxs!!
    Joseph

    I have updated to Mavericks and now Quick Time Player don't read the Apple Intermediate Codec, needs convert the movie to Apple ProRess 422.
    I've installed Final Cut. Any ideas?
    What are your goals. If playback is all you want, use the QT 7, MPEG Streamclip, MPlayerX, Flip Player, or any other app that plays content using your system's AIC, Animation, PNG, DV stream, etc. codec configuration which QT Player X v10.3 now only uses as conversion assets. As to what is happening here, it would seem that Apple has now added a full encode/decode codec to the default  system codec component configuration under Mavericks which may be replacing AIC as the default "poor man's" standard codec for for HD content. As to editing apps, iMovie v10.0 still accepts and natively uses AIC for editing projects but zI am not using FCP X, so I cannot make any comments regarding its compatibility.

  • I tried to download a program from the apple store after I have enter the password I have received a message (your apple ID have been disabled)

    I tried to download a program from the apple store after I have enter the password I have received a message (your apple ID have been disabled)

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • TS2972 my apple tv devices and other apple devices can access my library but using my library, i cant access any of the apple tv devices through airplay

    my apple tv devices and other apple devices can access my library but using my library, i cant access any of the apple tv devices through airplay

    Home sharing isn't working either
    Which is why you can not use the remote app.  Did you turn on home sharing on your computer and on ATV?
    eve though they have the same Apple ID.
    Did you enter the ApplieID in the home sharing login though?  Or just in for the iTunes store, or iCloud, or photo sharing, or something else?
    Home sharing isn't working either, I can't play or transmit any video from my iPad to the Apple TV because it doesn't recognize it
    That would be AirPlay, not homesharing.  THey are not related.  Did you enable air play on all the devices?
    Have you run the network test tools on ATV?  Can ATV access the iTunes store, Netflix, etc?

  • I bought a used Iphone 3 and I am having difficulties acceding programs because the apple id slots are full. Does anybody know anything My phone is disconnected right now and I am having issues with my home phone so I cant call Apple Support???????

    I bought a used Iphone 3 and I am having difficulties acceding programs because the apple id slots are full. I need help knowing how to delete these accounts so I can put my apple account on it .
    -thankyou The Roofer

    You should restore the iPhone to factory settings so as to clear off all data and content from the former owner.
    http://support.apple.com/kb/HT1414
    Then you can set it up with your own Apple ID and sync/download your content.
    Regards.

  • My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it back up? Recently rented a movie directly through apple tv but can't see the movies section in main menu now.

    My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.

    Welcome to the Apple Community.
    Check the location setting for the iTunes Store is correct.
    You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    If you are still having problems try a restore.

  • Wouldn't be a handy update if at the top of the open Pages document, next to the Apple and Pages menu option, it showed the open document name or file name?

    Just as the title says, really.

    I'm not sure where the Apple and Pages menu option is.  When I'm editing a document in iCloud Beta the name of the document is in the window caption (below).
    But your suggestions should be sent directly to Apple and you can do that via the Send Us Feedback button at the top of the document list page:

  • Why will my iMac Intel Lion no longer go to "sleep" using the Apple drop down menu?

    How can I get my iMac (Intel /  Lion 10.7.4) to go to "sleep" using the Apple drop down menu.  I have never had a problem until recently.

    Some process is running that is preventing sleep mode,
    Zap the PRAM and see if that changes things.

  • What are the CSS selectors for the FireFox 4 Main Menu?

    What are the CSS selectors for the FireFox 4 Main Menu?
    [http://img228.imageshack.us/img228/5512/ff4menubar.gif http://img228.imageshack.us/img228/5512/ff4menubar.gif]

    Still the same as in Firefox 3.5 and 3.6 versions:
    <pre><nowiki>#main-menubar
    #file-menu
    #edit-menu
    #view-menu
    #history-menu
    #bookmarksMenu
    #tools-menu
    #helpMenu
    </nowiki></pre>

  • Acrobat 9 dll files takes time to unload after closing the reader

    I have a Java Desktop application, in which Acrobat 9 is used to display the reports generated. Acrobat 9 does not start a child process under acrobat.exe but loads dll files in the process and they take time to unload, due to which my javaw.exe is not shutting down and i am unable to restart the application eventhough I have logged out of the application.
    This application had used Acrobat 8 previously and this was never an issue that time. Kindly help me out with this issue.

    This problem I have to solve as soon as possible... It's kind of urgent.. So if anybody has any idea about thisthen do share it, it will be highly appreciated!

  • Could not able to access workbook from the favorites of User Menu

    Hi all,
    I have got a problem in accessing Workbook from the User menu (SAP GUI) Favorites.
    I added a workbook to my favorites but now when i double click on the Workbook from my USER MENU (SAP GUI),
    BEX is opening and the connection is also maintained but the workbook is not appearing in the BEX.
    I checked in SU53 and this is not related to any authorization issues.
    Could anyone help me in solving this issue and
    providing ?

    I can't aunderstand why it happens, but try adding the workbook to a role and assign the role to your user.
    Hope it helps.
    Regards

  • Why do programs change the volume of main channels?

    Why do programs modify the volume of the system themselves and not just of their own "channel" similar to in windows? The only programs I found that do this are quakelive and the flash plugin.
    The fact these programs do do this means it it possible, so why is it not the standard?
    It is quite annoying to have to raise the volume of my system just because I turned down the sound in mplayer or mp3blaster or some other application. Is there any easy fix for this?

    lucke wrote:
    josh000 wrote:I don't want to draw comparisons, but windows and mac have had this basic ability for at least the last 10 years.
    Didn't system per-app volume control, akin to the one provided by pulseaudio, appear only in Vista?
    For whatever it is worth, I use pulseaudio only for that functionality.
    No, Vista included separate mixers for each application.
    Programs have had independent volume control since 95, and quite possible since 3.1
    You could make a movie player have lower volume than say, a game or song playing, while having one volume control for the system. In vista beyond you have separate volume controls for each application, regardless of if the application allows it or not.

  • I want to get a web cam for the mini so I can use face time. I asked at the Apple store and they said I could use any camera.  When I look at the cameras on Amazon they seem to all be Windows based so I am confused.  Any suggestions?

    I asked at the Apple store and they said I could use any camera.  When I look at the cameras on Amazon they seem to all be Windows based so I am confused.  Any suggestions?

    We've used the Logitech quickcam Vision Pro for Mac on our mini, with 10.6, and ichat, which has worked well. Looks like it's discontinued, however, a number of sellers on ebay are selling them new for $60-$70.

Maybe you are looking for