HT4407 I have Installed windows 7 and didn't made my drivers copy from iOS, I have a macbook air late 2010 model a1237, how can I get the drivers for my mac to support windows 7?

I have installed windows 7
and then searched for drivers then I found on mac support
that I had to burn a copy of the drivers for my laptop
so I had a late 2010 iso version installed on my macbook air.
How can I get a copy of drivers for my version
to work with windows 7.
I have windows 7 installed and working but got no sound, pad is not working
and all the commands + functions are not working as well and camera also
I would highly appreciate any help
specially if someone has a mackbook air late 2010  drivers copy and willing to share with me
Thanks in Advanced
Netsol

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

Similar Messages

  • HT3964 I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now. should i reset SMC. Would i

    I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now.
    should i reset SMC... would it help?

    I'm doubtful it's a missing driver too, but I feel as though it's driver related. The first time XP was installed, after first boot without installing drivers, it was without sound etc, but fundamentally the system worked. Now after first boot, it's very buggy. Thanks for your suggestion Tonny. I ran the tool but it turns out the HDD is fine. Besides, everything runs fine in safe mode.
    Does anyone know if (generally speaking) there is any firmware on the graphics card that would get updated via a Windows update? i.e. is it possible that Windows update downloaded a driver for the graphics card that installed new firmware that wasn't all that compatable with XP?

  • Hello! I havent received any code after paying for it! Money's been withdrawn from my bank account and all I have now is a transaction code. How can I get the code for Photoshop?

    I havent received any code after paying for it! Money's been withdrawn from my bank account and all I have now is a transaction code. How can I get the code for Photoshop?

    You'll need to call Adobe customer support on the telephone.  There's little we fellow users can do to help you.
    -Noel

  • Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

    Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue?  I have applied all Mac updates and still having problems with the trackpad.

    The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
    You can try doing a SMC reset however I don't think that is the solution.
    SMC RESET
    • Shut down the computer.
    • Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    • On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
    • Release all the keys and the power button at the same time.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    • Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    • Release the keys.

  • I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

    I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

    Click here and request assistance. Gift cards are usually if not always final sale because it would be easy enough for someone dishonest to abuse returns or replacements of them.
    (58640)

  • How can I get the updates for Photoshop CS5 to download to my new Macbook Pro where I have already installed CS5 from my original disk? I have tried many times over 2 days. I was able to successfully download the current version of Adobe DNG converter.

    How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!

    The Adobe auto updater is highly unreliable.
    You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
    Adobe - Photoshop : For Macintosh
    ~~~~~~~~~~~~~~~~~~~~~~
    Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

  • I have a Mac OS X and a Sony HDR-CX7 camcorder.  When I get onto the sony webpage to download program to import movies onto my Mac, they only have downloads for Windows.  How can I get a program for my Mac?

    I have a Mac Os X and a Sony HDR-CX7 camcorder.  When I get onto the Sony webpage to download the program so I can import my movies, they only have programs Windows.  How do I get this for my Mac.

    You shouldn't need any application except what you already have: iMovie, iDVD, iPhoto....
    To check on compatibility with your model camcorder, check these out:
    https://support.apple.com/kb/HT3290
    http://support.apple.com/kb/TS3356
    Some formats are not readable by the above; you can use something like MPEG Streamclip to convert the footage or Quicktime Pro (as mentioned in one of the articles).

  • HT5470 How can I get the driver for my new ipod nano 7th gen for windows vista?

    Recently  purchased a Nano 7 to replace my 3rd generation struggling to connect to my windows vista laptop and Im looking for the driver, can anyone help?

    The driver you need to connect your device to Windows is installed during the iTunes installation. So if you already have iTunes installed, verify if it is updated. If it's not, then update, If it is already updated download a new .exe file from the Apple page, and reinstall it:
    http://support.apple.com/kb/HT1923
    Follow this article before removing iTunes and its components.
    Hope this helps!

  • HOWTO: Make Virtual WiFi work in Windows 7 for MacBook Air (Late 2010)

    I just spent several hours figuring out what is a bug in the Broadcom WiFi drivers for my new MacBook Air, and thought I would post how I fixed it for others until Apple can get Broadcom to fix their drivers.
    Virtual WiFi:
    First, what is Virtual WiFi. Virtual WiFi is a feature in Windows 7 that allows a single WiFi adapter in a computer to look like more than one adapter. The most common use for this is for software like Connectify that allows you to use your laptop as a wireless access point (AP) when you travel. For example, you might settle into a hotel room, pay for an Internet connection for your MacBook, and then want to share that connection with your iPhone, iPad, and other devices. For Virtual WiFi to work, the WiFi drivers for your WiFi hardware need to indicate that they support the feature, and then in Device Manager in Windows Control Panel, under Network Adapters you will see the "Microsoft Virtual WiFi Miniport Adapter" listed. Notably, this adapter was missing after installing Windows 7 and BootCamp 3.1 on my MacBook Air (Late 2010).
    Why it Doesn't Work:
    The strange thing is, this was working fine on my wife's MacBook from 2008, with similar Broadcom WiFi hardware. It turns out that whoever made the Broadcom driver file made a small copy-and-paste error, and neglected to support Virtual WiFi for the slightly different chip that is in the MacBook Air versus the MacBook. By fixing the driver file, the issue can be fixed. The problem is right here in the file, which we'll get to more below:
    %BCM430N_DeviceDesc% = BCM43XNM_NT61, PCI\VEN14E4&DEV432b
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN14E4&DEV432c
    %BCM430N_DeviceDesc% = BCM43XNM_NT60, PCI\VEN14E4&DEV4353
    My wife's MacBook uses the first line with DEV_432b at the end. Note that it uses the installation section BCM43XNM_NT61 which refers to Windows 7 and correctly installs Virtual WiFi. The newest MacBook Air uses the last line with DEV_4353 at the end (a slightly different chip). Note that it incorrectly refers to the installation section BCM43XNM_NT60, which is Windows Vista with no support for Virtual WiFi.
    How to Fix It:
    1) You first need to extract the Broadcom drivers that are in the latest version of BootCamp so that you can modify the INF file. To do this, I followed all of the instructions in the BootCamp Assistant from Mac OS X on my MacBook Air to download the WindowsSupport folder with BootCamp drivers, which you can save to the hard drive or burn to a CD. Once you have this, open the folder "Boot Camp\Drivers\Broadcom". We need to extract the file BroadcomNetworkAdapterWin7_32.exe or BroadcomNetworkAdapterWin7_64.exe depending on whether you are using a 32-bit or 64-bit version of Windows 7. I was able to do this with WinRAR installed, by right-clicking and selecting to extract the file to a folder.
    2) In the folder from the last step, there are 31 files on my installation, but the one we want is bcmwl6.inf. If you open that file the first two sections (BROADCOM.NTamd64.6.1 and BROADCOM.NTx86.6.1) are the ones with the error as reproduced above. The first section is for 64-bit installations, and the second section is for 32-bit installations.
    3) Modify the last line of each section to change BCM43XNM_NT60 to BCM43XNM_NT61, and save the file.
    4) Now we need to install the driver from this folder onto the MacBook Air. I did this by opening Device Manager from Control Panel, right-clicking the "Broadcom 802.11n Network Adapter" under Network Adapters, and selecting "Uninstall" followed by "Update Driver Software". Point the update dialog to the folder where you modified the driver, and let it install.
    5) Note that because the INF file is modified the driver is no longer correctly signed. You will see a warning to this effect, and you should select to install the driver anyway.
    6) You should now see the "Microsoft Virtual WiFi Miniport Adapter" in Device Manager, and software like Connectify should work to share your WiFi connection.
    Hopefully Apple will fix this the correct way soon, by getting Broadcom to fix their driver and updating BootCamp to include it. At the time of this writing, the Broadcom driver version is 5.100.57.8 so anything later than that may be fixed.
    Good Luck!

    That is one heck of a post for a newcomer here. Your instructions worked like a charm, with one exception:
    When uninstalling the Broadcom Device, I had to check the box to delete the driver, and then had to scan for new hardware to get the device to show back up. Then I was able to load the edited driver software.
    I am not complaining, but very grateful, as I was pulling my hair out on this one.

  • How Can I Get the Amount of Free Disk Space Using space using windows 7 please share example using GetDiskSpace

    How Can I Get the Amount of Free Disk Space  using windows 7 please share example using GetDiskSpace i have already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

    Reading your question a bit more in detail, I doubt whether you are using Win32 API GetDiskFreeSpace function (for which my previous post is the solution) of Programmer's Toolbox GetDiskSpace function.
    With reference to the second one, it works even with disks larger than 2GB but you need to use the proper formatting code to display the returned value. I updated my example to show total free space in the debug output window and added a comparison with 3GB value using UInt64TypeCompareUInt from the Programmer's Toolbox.

  • Hi, I purchased apple applications and did not receive receipt, how can I get the receipt?

    Hi,
    I purchased some apple applications and already paid for this in my credit card, but I did not get receipt for it.
    The purchase was on July 5, 2012.
    How can I get the receipt for this purchase?
    Thanks!

    Call the Apple Store and inquire. I believe I read that it can take several weeks for them to send the card, but I'm not certain. The store should be able to tell you.
    Regards.

  • FaceTime and iMessage not working on MacBook Air (Late 2010)

    I'm trying to login with my icloud account in facetime and imessage with my MacBook Air (Late 2010) but never login. In other device, as my New Mac Mini I can logged-in right. There any problem with FaceTime and iMessage working on Yosemite in old MacBooks?

    Hi,
    It would really help to know what you actually see when this happens.
    Is there any sort of error message ?
    9:20 pm      Saturday; March 28, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

    I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
    I remember that with Snow Leopard you could download them from the Apple website.
    Cheers!

    Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

  • Blinking cursor when installing Windows 7 on a MacBook Air (Late 2010)

    Hi.
    After spending several days trying to solve this, I turn to this forum.
    I have a MacBook Pro Retina (Mid 2012) and I had no problem installing W7 on that machine.
    My wife has a MacBook Air (Late 2010), on which I am trying to do the same.
    I use an external LaCie BD/DVD reader/writer, which I also used for the MBP without problems.
    After partitioning and restarting, the install DVD doesn't seem to want to work with the MBA, though. Only a blinking cursor appears. Occationally some message like "Error code 5" or BOOTMGR image is corrupt. The system cannot boot."
    I've tried starting with Alt, and when the screen appears where I can choose the Install DVD, there is no HD image, as on the MBP in the same situation, but just an image of a disk under which is written "EFI boot" - and it keeps poofing, appearing, poofing appearing. Actually, the first of these poofing images is actually called Windows, but choosing this returns the same blinking cursor.
    I have tried resetting the PRAM and SMC, as well as repairing the disk.
    Any ideas how to solve this?
    Best,
    Richard

    leiladog wrote:
    Can I install Window 7 Professional on a boot camp partition on my 1.8/2GB/64GB SSD MBA?
    Today I installed Win7 Preimum on my brand new MBA (1.8/4GB/128GB SSD).  I started with a stock MBA and first installed the new version of Parallels (7).  After that installation, I installed Win7 Premium, followed by MS Office for Students and MS Streets and Trips.  I should note that I also added slightly over 500 tunes for iTunes.
    I was hoping to only install Excel and Word, but I never saw an option to go custom and as a result, all of Office for Students got installed.
    With Parallels I didn't have to partition the hard drive. While I'm not totally sure, I think Parallels "grabs" empty space as needed, either for OS-X or Windows.
    When I finished the installation, the computer reports that I still have 87GB.
    I would assume if you went the route above and installed all the same programs, you would end up with 43GB of free space.
    I intend to use my MBA as a road warrior, mainly surfing with some light Excel/Word.  Unless you really need the Professional version, you might consider just installing the Premium version if the size of the program is much larger.
    I've only been running for a few hours, but the machine seems very robust in both OS-X and Win7.  Re the size of your hard drive, you might consider picking up a small external hard drive.  I have a Western Digital Passport that is about the size of a cigarette pack and has the look of something that Apple might have made. 500GB for about $70. 
    I'm wondering if your 2GB of RAM might be a little on the weak side for going this route?

  • Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design  Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
    Thank you so much for your help.
    Pekka
    Pekka Saatsi
    arkkitehti SAFA
    SAATSI arkkitehdit oy
    Bysmedsintie 56
    06500 Porvoo
    040 5955933
    [email protected]<mailto:[email protected]>
    www.arks.fi
    Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
    You have been mentioned
    by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644>

Maybe you are looking for

  • Alchemy Refund: Creative dosen't answer

    I people, i'am one of a lot of idiots that bought creative Alchemy for audigy 2 zs. I appreciated very much that creative stared a mass refund of 9.99 $, but at the moment i don't received money yet, i have the following problem, and creative as stop

  • Can I use 64-bit Windows 7 on an Early 2008 iMac?

    According to the official support page, 32-bit Windows 7 is supported, but I have seen listings elsewhere that this machine meets Microsoft's specs for 64-bit Windows 7 "with the correct drivers" and that people hve successfully installed and run 64-

  • Here's my experience

    So My b210 for some unknown reason has stopped working with my ipad I reset to factory It tells me to log on to eprint I go to log on Hp eprint tells me i ***HAVE*** to combine by existing snapfish account that i never even knew i had let alone used.

  • RFC Model Structure BAPI_SALESORDER_CREATEFROMDAT2

    Hello Forum, i need help concerning Web Dynpro Java, i think i have a comprehension problem: When i import the Bapi_Salesorder_Getlist as Adaptive RFC, Map the Model to the context via Apply Template (Service Controller), Apply Template into the View

  • InDesign 'quits unexpectedly'

    When I try to open Adobe InDesign CS5 it closes and says it 'quit unexpectedly'. How do I get it to open again?