HT4407 i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?
i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?
AlisinaBahadori wrote:
i just lost that disc. any other ways to get support disc from another pc? or recover my last mac os?
You are making no sense at all, are you using Lion or Snow Leopard,? did you try BobTheFishermans sugegstion for booting into OSX, please answer the questions rather than your current approach.
Similar Messages
-
Are there any other ways to get automatical callback from Oracle
except Advanced Queuing.
I guess but that was what I was on earlier but it wasn't of much help.
I need to chat with an apple person but don't know how if I don't have a phone accessible.
Is there a way to connect thru a laptop or something? -
My account was charged for buying app that I actually didn't buy. I was trying to sort out these mistake by calling the support number given (Russia). There was no other options like sending an email or calling some other number. I was on hold for one hour and a half! Is that normal for Apple support??? So apart from being charged for the app I haven't given my permission to buy, I also got a phone bill for calling the only support number available. Where can I submit my complain and what could be done about it?
Thank you,
NataliaThere is an email way to do this. See here: https://getsupport.apple.com/ContactInfo.action
The Russian Federation is one of the countries listed under Other. -
Is the other way to get the downloads from the support section
Is there any other way to get the downloads from the support section?
Because the download speed is very slow. For example in need the new version from the Value Added Package, and its 116 MB big. A normal download time would be about 5 - 10 minutes. But when i download it from Toshiba I need 2 - 6 hours. Not good for a company that makes high performance computers and notebooks.
And the worst thing is that the connection is reseted after some hours...so I'll never get the update.
Does anyone know help?
Gruss
ThomasHello Thmas
I can understand you very well because few days ago i have installed Vista Ultimate on my brand new Satellite A200. Unfortunately I am afraid there is no much to do. You know very well that since Vista OS is on the market, thousands of people want to downgrade OS to WXP or update to Vista ultimate.
I am really not wondering that download is so slow. I have noticed that download speed is much better early morning and maybe you should download all stuff you need at this time. Save all this stuff for further handling.
Bye and good luck -
i lost my iphone 5 and i don't have i tunes.can i use my phone number or any other way to get the serial number?
No.
Serial number is available If you have:
1. The iPhone box when you bought it, if you still have it.
2. The receipt, where you bought the iPhone
3. Computer iTunes, if you have synced or backuped the iPhone.
4. https://supportprofile.apple.com if you have iPhone registered -
Is there any other way to get Adobe Captivate help?
Hi guys,
is there any other way to get Adobe Captivate specific help? I've posted a question twice with no help, it's very specific, so no one here might actually know the solution. I'm wondering though, since the chat is obviously not for Captivate users with product or service questions.
Is there a tech team I can somehow contact? We really need an answer to the problem.
Thanks,
Nat
P.S. I'll post the problem again here:
We publish mp4 training videos as HTML5 content and have the problem that we need to restrict the player to only play/pause.
Adobe Captivate 7 works fantastic for us on almost all devices, many Androids, many browsers, and even on iPad. Captivate, after adding the video as a multi-slide video to one slide and publishing it as HTML5 content, only lets the student play and pause the video - just what we need.
But then we test it on iPhone and the iPhone's internal quicktime player recognizes the mp4 video and kicks in, gives the student all the functions they want, totally overrides the HTML5 published Captivate restricted playback options.
Is there ANY way we can get around that? Any function or box we haven't checked before publishing the HTML5 content?
We would even be happy, if the video wouldn't play on iPhone - just as long as they can't use it to fast forward to the end of the video.
Does anyone here know how to bypass the internal iPhone 5 player?
Thanks,
NatBy the way, I have updated to the newest Captivate 7 version and am using iOS version 7.0.4.
Again, it's fine on iPad, but not on iPhone 5. -
My iPhone's touch screen recently quit working, so I have a new one on the way so I tried to back-up my phone on my laptop and it will not connect. I've tried restarting the Apple Mobile Device services and that didn't work. So I completely unistalled iTunes using Apple's instructions and re-installed it and it still will not connect, and I don't use iCloud because the iPhone is my only Apple device. Is there any other way to get things off of my iPhone or is it all pretty much gone?
You need to get iTunes to recognize it. If your iPhone is working, which it is not, then a new screen would help. But you iPhone is broken beyond just a new screen. Now you can see why iCloud or even an iTunes Back Up is so important. iCloud back up is ideal for you, a one Apple device person, it automatically backs up your iPhone so there is a current back up ready to use anytime, especially in emergency like this. When you get your new iPhone, iPad anything use iCloudl it is free and simple.
-
Adobe's website broken - Any other ways to get the serial number?
Hello.
I bought the student's version of Adobe's Creative Suit.
Now I need to get the serial number from a link which doesn't exist. It says that it is broken.
Is there any other Way to get the Serial Number because without it I can not activate the product.
Can somebody help me please?
Greetings.Hi Dendylein2,
One tip to get you up and running quickly: You can use Creative Suite before getting your serial number, by selecting the installation option that allows you to install the product as a trial. You can then use the serial number to convert it to the non-trial version later.
Did you purchase your Creative Suite in North America or elsewhere (the correct solution can vary, depending on where you purchased the Creative Suite from).
If you purchased in North America, have a look at the options in the table and choose the link that matches your situation:
I have a Student and Teacher edition product
If you purchased outside of North America, and from a reseller, the website is down and I apologize for that. This is known and Adobe is working on a fix.
Thank you for posting. -
I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine. -
Is there any other ways to get the Windows support software?
Hi guys, I encountered some problems while downloading windows support software using boot camp assistant. This keeps showing up:
I have tried over 10 times, even with VPN connected. But it failed every time at this point, very frustrating. Is there any other way to get windows support software? Maybe a third party website to download?You can try downloading Windows support software from this page > http://www.cafe-encounter.net/p682/download-bootcamp-drivers
I tested the links and they work. However, this must be the last thing you should try as packages may be modified (now not, because they are from Apple servers) -
Help, I have forgotten my Apple ID security questions and when i send it to my email address to reset the questions nothing shows up in inbox. Any other way to get past this?
You've checked the spam folder on your rescue email account as well as the inbox, and you've tried clicking the reset link a second time ? If you have, and you still haven't received the email, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 -
Help, I have forgotten my Apple ID security questions and when i send it to my email address to reset the questions nothing shows up in inbox. Any other way to get past this?
Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If you don’t know your security questions, phone Apple (using the number listed here: http://support.apple.com/kb/HE57 ) and ask for the Account Security Team. -
Any other ways to get parameters of a URL in a window method ?
Hi,
In SDN, i find the below two ways to extract the URL parameters, when i pass them while opening a new window. But, unfortunately they dont work for me. so, would like to know, if any other ways are existing to extract the URL parameters.
1)
HANDLEDEFAULT method of the window:
DATA: lt_url_parameters TYPE tihttpnvp.
wdevent->get_data(
EXPORTING
name = if_wd_application=>all_url_parameters
IMPORTING
value = lt_url_parameters ).
2) In HANDLEDEFAULT method, have the URL parameter names as importing parameters and use them normally.
If there is no other ways, can some one help me in pointing the issue that i face ?
Note: I have wdevent (CL_WD_CUSTOM_EVENT) importing parameter in place.
Thanks in advance,
Gaurav.Hi,
How you are trying to pass your parameters ? I believe you are using some SAP provided template (like for XSS) and relying on passing of some standard parameters. These parameters may be absorbed by the standard component and may not be passed to your WebDynpro Component. You can try passing them as application parameters.
Thanks
Prashant -
I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?
You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
Regards. -
Due to poor broadband speed -less than 1/2 meg- updates for my IPod touch are scheduled to take up to 9 hours!. The system usually time out. Is there some other way to recieve update?
Try here:
iPod, iPhone and iPad Firmware Download
Near the top of the page it says how to select what you downloaded. Make sure you download the right update for your model iPod. They are different.
Maybe you are looking for
-
I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a f
-
Where do you select which program you want to open files with a particular extension?
Where do you go to select which program should open files with particular extensions?
-
Bronze keyboard Will not start from hard drive
This computer (333 Mhz Lombard 192MB ram) has a 40GB seagate HD recently installed, It has Mac OS 10 on it and 9.2.1. I've run multiple tests on it using Apples Mac Test pro and all the tests have passed. It starts readily from the CD I have also rec
-
IPTC data, keywords and captions
I used lightroom 4 for all my tagging/labelling and uploading work at sporting events. It has always worked flawlessly and I was very happy with it, however, I just had to reset my laptop due to a harddrive failure so have had to download Lightroom 5
-
Reg RFCSDK files download for reading file in the background.
Hi All, I am trying to read a file in the background for which I need the RFCSDK. i am using R/3 Version 4.6C... I searched every where in the service market place but with no luck. Can any one tell me if there is any other location to find the same.