HT4413 What about "do not transfer this account"?

Migration assistant wouldn't let me use the same account user name, so I selected "do not transfer this account". So where are my files? For users I have just my original account and a guest account, neither of which can see the files. I've now logged in as a guest and replaced the original account, but are the files from the first attempt somewhere on my hard drive taking up space?

If you chose to migrate everything but then opted out of the Home folder, then you moved third-party applications and their support files and system preferences.
If you migrate the Home folder using a different name, then you will need to log into the migrated folder to access your files. Or you can create a new user account with a different name such as "test." Log into "test" and delete the account you are now using. Then migrate your old Home folder. After it's been transferred log out of "test" and log into the newly migrated account. Delete the "test" account.

Similar Messages

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Someone hacked my computer and set up a new administrative account by re-registering my computer. I can not access this account nor delete it. How can I fix this and get my computer back to the way it was?

Someone hacked my computer and set up a new administrative account by re-registering my computer. I can not access this account nor delete it. How can I fix this and get my computer back to the way it was? And also prevent this from being able to happen again. I have the link the kid used (http://www.ihackintosh.com/2009/05/how-to-hack-the-user-password-in-mac-os-x-wit hout-an-os-x-cd/) Apparently he used hack 2. HELP PLEASE!

Not sure why you can't delete that account. If you have admin privileges, you should be able to. Sounds like you only removed the Home Folder for that account.
You should highlight/select the account you want to remove and then click the minus button. Might need to unlock the padlock with your admin password.
Have a look at these articles from Apple, if necessary.
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8162.html
http://support.apple.com/kb/DL1399

TS3212 I have an I tlunes account on my I pad. Can i transfer this account to my PC. Im using windows internet explorer 8

I have an I tunes account on my I pad. Can i transfer this account also to my PC. Im using windows internet explorer 8

See > http://www.apple.com/support/itunes/authorization/
From here > http://www.apple.com/support/itunes/getstarted/

Hi There, What is General ledger Transfer in Accounting Close Cycle (INV)

Hi There,
What is "General ledger Transfer" in Inventory
<N>Accounting Close Cycle inside -->General ledger Transfer
Can any one breaf on the topic
Thanks Bachan
Message was edited by:
Bachan

Hi,
You can transfer a summarized inventory/work in process activity for a given period
into the general ledger interface. Using Journal Import in Oracle General Ledger, you can then post this information to the general ledger. You can perform the general ledger transfer at any time during an open period-not just at period close. The transfer loads summary or detail accounting activity for any open period into the general ledger interface, including both inventory and work in process entries. When more than one period is open, the transfer selects transactions from the
first open period up to the entered transfer date, and passes the correct accounting date and financial information into the general ledger interface.
When transferring detail entries, the accounting date in the GL_interface table is
populated with the period end date of the accounting period. When you transfer
summary entries with two periods open, and you enter a transfer date in the second period, the transfer process assigns the period one end date for all the summarized transactions in period one, and assigns the entered transfer date for the summarized transactions in period two. Using Journal Import and Post Journals processes in Oracle General Ledger, you can then post this information to the general ledger.
Interim transfers allow you to reconcile and transfer information weekly, for
example, making the month-end period close process much simpler and faster.
Note: If time permits, run the general ledger transfer process up to the period end date before closing the period. Since you cannot reopen a closed period, running this process before period close allows you to proof the summary transactions and make adjustments to the period via new inventory transactions as necessary. This makes the month-end period close process much simpler and faster
Thanks,
Anish Daniel

HT4413 What about secondary disks - where do they go when they are restored by Time Machine?

What about secondary disks - where do they go when they are restored by Time Machine?

I see the "Remove now" button next to that checkbox--exactly
what messages does that button remove? The current message?
All messages? Just the ones that don't have a blue dot next to them?
The Remove Now button removes ALL messages available at the incoming mail server for the account.
To remove an individual message from the server, select the button at the bottom of the mailboxes drawer which has a gear icon.
At the bottom of the menu window that appear, select Get Info.
Select the POP via the Account selection - the account will be already selected if you are accessing a single account with the Mail.app.
Under the Messages On Server tab at Show Messages, All messages on POP server should be selected.
The window below will reveal all messages currently available on the server. You can select an individual message or multiple messages and then the Remove From Server button.

What about 1020 not receiving any updates? Wait, d...

Hello people, just entering this forum in order to get some info regarding 1020. I've bought one in February 14th and has been the best phone I've ever had (and I've had many, including iPhone 5). With every update I started to feel Microsoft Mobile really cares for customer satisfaction.
Until now -.-
With the imminent launch of Lumia Cyan, I've seen many awesome features will be available, like Living Images, continuous autofocus, and so on, ONLY for Lumia 1520, Icon and 930.
Had Camera Beta installed in my 1020 and Living Images was working perfectly, but today, the official Nokia Camera updated and didn't bring any of this.
I can understand many of these updates require powerful hardware in order to not compromise stability, but HEY! remember 1020 is powered with a Dual Core Qualcomm MSM8960 Snapdragon running at 1,5Ghz with 2GB of RAM, I mean, I think this is enough for carrying out some of these features...
When I read about the updates not coming for my device I started thinking that maybe there is going to be a 1020 specific update with exclusive features for the camera (like maybe a faster capturing speed). Now I seriously doubt it, and since the Cyan updates will be at first only for the mentioned devices, I'm starting to feel like my phone is like a shame compared to the new ones. I'm feeling like when Apple released the iPhone 5c dropping down the 5's price.
At least M Mobile didn't make my phone unusable...

no worries mate. i for one do like the 1020 as it does take some fantastic photos. I know that really Nokia Camera is only a placeholder until the full Lumia Cyan update is delivered in the summer, so will see what features are brought to the table then. i am sure that if the hardware supported it, they would add the features then to the 1020. as it stands, other things such as Dolby audio recording will stand specific to others like the 930 and 1520 simply due to the hardware required. but nothing beats a xenon flash for me

Anbody used Hash partioning? - what about queries not using partition key

Hi there,
We have a table, will have over 3 billion rows when loaded and wish to implement partioning.
Brief structure
cal_id -- relates to date of transaction
prod_id
cust_id,
sales_qty
The id's are all surrogate id's/dimension keys
About 80% of queries expected to use by on_sale_date of product rather than date of transaction hence considering using hash partition on product_id.
Queries will hit > 1 partition in general and also some e.g 15% of queries wil be by date of transaction.
Qusetions I have - how will these 15% of queries be affected. I expect will be poorer performance-wise because of partioning but becuase of size of table and 80% queries by product have to use partition.
Also will partition-pruning work if queries use between rather than = operator
Anbody used hash partioning - keen to hear other people's ideas/experience with hash partioning.
Many Thanks

Hi,
When partition pruning is not used, then that depend on the access path.
If it does a full table scan, then there is nearly no overhead to full scan all partitions (compared with full scanning the same non-partitioned table)
If it is an index access and if indexes are local, then all indexes must be read. But with global index, again, there is no overhead in comparison with a non-partitioned table (except that indexes are a bit larger when global on partitioned table)
However can be expected to partition even when reading all partitions, especially with parallel query.
the between is not optimal with hash partitions, s it is hash partition, not range partition.
Regards,
Franck.

HT1947 What about bluetooth support for this app now that Apple TV supports it?

Don't want stand alone keypad on coffee table. How about being able to use remote app through bluetooth instead of wifi?

Apple does not have an intutitive process for refunds, but I have gotten one me emailing customer support when I bought an App that falsely advertised its functions, so you might have some luck that way

What about sites NOT created with Dreamweaver templates

I am using Dreamweaver CS3 (no templates), and code most everything by hand (html, javascript and CSS). Would it work to have people in my office adding content to these existing sites with Contribute CS5 since there are NO Dreamweaver templates in place?

Html webpages are editable in Contribute.

What about security in adf faces application ?

It seem that the documentation has a little bit changed about security for adf faces application.
SRDemo J2EE sample application only implemented the security at the web container and may be for the session beans (don't remember) by using security-role and security-constraint in web.xml configuration file.
It seem that the documentation recommand now to implement adf security and didn't find anymore the reference to the standard j2ee security implementation.
We found also that the security constraints checked by the web container was sometimes ignored and the container didn't ask us to login before displaying a page.
Is ADF security a clear Oracle recommandation for ADF Faces application ?
What about j2ee security for this type of application (why it is not recommended to use it) ?

Hi,
there is no single recommedation about security because security ideally is applied on several levels to implement security in depth. Container managed security with J2EE is a good option to secure page access and - if using EJB - to propagate the user identity for method level access control.
Using ADF Security, which is security added to the binding layer based on JAAS, a second layer of the security onion becomes available that allows you to define which user is allowed to perform which operation on an iterator or attribute binding. This goes beyond of what container managed security can do for you.
The thrid layer is business layer security and eventually database security.
For Oracle Open World we will have a developmengt track and one of the presentation I am giving with Ric Smith from our team is about end-to-end application security for ADF Faces, ADF, ADF BCor TopLink/EJB and the Oracle database.
The plan is to also write this up in a paper, but this would come late because of other priorities I have on my plate. So attending OOW probably is the best option for you to get the big picture
Frank

Adding permissions "NT Service\mpssvc" not working - the account is not found. Firewall not running (error 5 (0x5))

Hi all,
i have a problem with the firewall-service on a Windows 2008 Std SP2. The firewall service does not start. Access denied problem. I can see that on some registry-keys the permissions for the "NT Service\MpsSvc" account are missing.
I found some similar threads, and
here is decripted what to do.
But if i try to add the permissions for "NT Service\MpsSvc" the server does not find this account - so, i cannot add it to the registry key.
What i have to do that i can select this account ?
Thanks
Bruno

But the problem is, that i can not ADD the account to the registry keys. The account "NT Service\MpsSvc" is not resolved when i try to add the permissions.
Bruno
While adding permissions and resolving for account name, in location select "local machine" instead of domain. MpsSvc is local machine account !
Also, please have a look at below article
http://blogs.technet.com/b/networking/archive/2011/06/14/the-windows-firewall-service-fails-to-start-registry-permissions.aspx
HTH
Thanks, Santosh (MCTS W2K8 AD and SCCM) “ To Infinity and Beyond… ”

Hi , I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen this ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad.

Hi ,
I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen
"This ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad"
I did authorized in the store, but still did not transfer to the mac. Could you please to tell me what should I do it? Please let me know that as soon as possible.
Regards,
Thank you

The iPad is fine. But the computer you're syncing with needs to be authorised with the Apple ID that was used to buy the material on the iPad. You do this by picking the 'Authorize' item from the menu in iTunes and entering the account name and password.

HT204053 Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is

To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tlj

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

HT204053 I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

HT4413 What about "do not transfer this account"?

Similar Messages

Maybe you are looking for