HT4427 installing a hard drive on my macbook.

How do I install a internal hard drive in my mac book.

Put the new drive in an external enclosure.
Partition and format the new drive.
Clone the old drive to the new drive.
Remove the old drive.
Install the new drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
  1. Open Disk Utility in your Utilities folder.
  2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area.  If it does not say "Verified" then the drive
      is failing or has failed and will need replacing.  Otherwise, click on the
      Partition tab in the DU main window.
  3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID  then click on the OK button. Click on the Partition button and
      wait until the process has completed.
  4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
  5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
  6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
  1. Open Disk Utility from the Utilities folder.
  2. Select the destination volume from the left side list.
  3. Click on the Restore tab in the DU main window.
  4. Check the box labeled Erase destination.
  5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
  6. Select the source volume from the left side list and drag it to the
      Source entry field.
  7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

Similar Messages

  • What is the best pre-installed external hard drive for my macbook pro?

    I need advise on what kind of pre-enstalled external hard drive which supports both usb and firewire to get for my new macbook pro?  I would like to stay in the $100. range but am willing to go higher .

    giftshopgurl wrote:
    pre-enstalled external hard drive
    Pre-installed with what?
    Your best bet is to always format a new hard drive,  so there are no surprises.
    If you buy an external HD specifying  ready for Mac ( or some such) it will cost you more for nothing.

  • Installing new hard drive in older macbook pro

    I have an aluminum Macbook Pro 17" with Intel Core Duo. This is the processor before they went totally to the Core 2 Duo.
    At the time I bought it the largest hard drive I could get was what I have, which is their 120 Gb internal drive.
    Is it possible to retrofit this older Macbook Pro with the newer 320 Gb drive? If so, how do you do it? Bring it to an Apple Store? Also, I use Time Machine. If I did do it can I just restore everything using Time Machine?
    Thanks

    If you are somewhat handy you can change the hard drive yourself. Instructions are available at [iFixit Site|http://www.ifixit.com>, and you can get appropriate hard drives at [Other World Computing|http://www.macsales.com>.
    You can copy the contents of your existing drive to the new one by 3 ways that I'm aware of;
    1) Disk Utility - Restore old disk to new disk
    2) Super Duper - Hear good things, but have not personally used it
    3) Carbon Copy Cloner - Have used it and it works fine.

  • No icon on desktop after installing additional hard drive

    Hi guys, I have installed a new additional hard disk. Jumped the old original as 0 Master and the new one as Cable select. If I check the About this Mac window, the new volume shows the new hard disk with its volume but I don't see an icon for new hard disk on the desktop. Does it mean that I don't have it properly installed ?

    welcome to macbook forum,
    which mac that you install that hard drive too, because macbook using sata and you don't need to configure that jumper in macbook.
    If you install that on desktop mac, and use the same cable, you should set both into cable select and your mac will register that based from the distance from the cable, the nearest is the first HD and the furthest one is the second.
    also after that, you can open disk utility and eras / initialize the new HD.
    Good Luck.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • Trying to install new hard drive in MacBook

    Hello,
    I am at a dead end and would appreciate your help.
    Due to a no-boot situation that I chased for several days. My hard drive was damaged (many corrupt/damaged/orphaned files) I confirmed that by using Apple Hardware test and then running a fsca check that said the disc was unfixable, I had to replace a failed system internal hard drive that HAD tiger 10.4.6 OS on it
    I just physically installed a new 160 GB WD (Sata) hard drive in a Macbook. No problem!
    However, when I try Power + C key to boot from the install disk #1 so I can get to disk utility to partition format etc. the new drive
    --------------------------------- I can't get there from here???
    After the start up chime, and after a short delay I see a ---black folder icon--- on the screen with a question mark symbol on it that is blinking.
    It seems that the Mac is telling me that it can not find the "System" Boot or some other needed folder.
    That actually makes since since I know that the new Hard drive internal/system drive is blank and NOT partitioned, initalized or formatted.
    The ONLY way I know to (prepare) the new disc for reinstallation of the OS is to boot from the install CD (power + C key)and navigate to the Utility area and prepare the new drive.
    Right?
    But I can not get any further than the point where I see the blinking black folder icon and question mark so NO UTILITY options are available to me.
    NOTE:
    I do have several windows based PCs that I could use to format/partition IF I can find a utility or program that will allow me to set a Mac partition from a PC based utility (and no, I do not want to end up with a Fat32 partition on the Mac)!
    If there is a utility available I can install the new disk as a external USB connected unpartitioned hard drive and go from there.
    Does anyone have any ideas about what I can do to get on with this matter?
    Help of any kind will be appreciated.
    (short of trashing the Macbook---Yes I considered doing that too)
    Thanks,
    Joe

    Hi Joe,
    Try just the C key alone, or the Option key, which should show boot choices, then...
    "Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the Erase tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume, then choose MacOS Extended Journalled.
    6. Click Erase & look for Security Options. choose Zero 1 pass."
    Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard...
    http://www.kenstone.net/fcphomepage/partitioningtiger.html
    Be sure to see the GUID Partition info at the bottom.

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

  • I have a macbook and I'm having trouble backing up my pictures on an external hard drive.  The Macbook won't install the backup drive soft ware? It is a new Sea Gate hard rive from costco.

    I have a macbook and I'm having trouble backing up my pictures on an external hard drive.  The Macbook won't install the backup drive soft ware? It is a new Sea Gate hard rive from costco.

    You don't want to install the software that came with the drive, you don't need it and it will be problematic. Connect the new drive, open Disk Utility, select the new drive and partition it using the GUID partition scheme, then format it as Mac OS extended journaled and it will be easy to use with your Mac.

  • Can somebody please advise urgently... I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion. I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted

    Can somebody please advise urgently...
    I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
    I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and  following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
    I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
    Can somebosy please help me urgently??!!!

    Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
    So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
    Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
    If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
    BR Pete

  • Just had to put a new hard drive in my Macbook. How do I "backload" my Ipod tunes into Itunes on the new hard drive I had installed?

    I just had to put a new hard drive in my Macbook. How do I "backload" my Ipod tunes back into Itunes on the new hard drive I had installed?

    Somebody told me that as soon as I connect the Ipod to the computer, Itunes will will wipe it clean and install what is in the Itunes library (which is nothing) and that I would need some sort of software to accomplish this. Does it matter that the tunes on the Ipod were all uploaded from cd's and not purchased?

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

    I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

    You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
    However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
    To access the email:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

  • Trying to install a SSD Hard Drive on a MacBook Pro.

    I'm trying to install a SSD Hard Drive on a MacBook Pro as the original one has failed. How do I install the Operating System onto it?
    I've read that you have do it through System Recovery

    New disks Do Not contain Recovery partitions for OSX, your advice is incorrect. Check before you post next time.
    The OP's machine may need to be reinstalled from discs rather than recovery, but without knowing the age of the Mac that is a guess.

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Maybe you are looking for

  • PO approver with WBS Element authorisations

    Good afternoon We have as a step in the approval of the Purchase Order, the approver for the WBS Element. We need to restrict this approval based on the WBS Element, which means that we should avoid a user to approve a Purchase Order if that Purchase

  • How can I uninstall a plugin?

    I want to uninstall the Adobe Reader plugin for Safari, but I can't figure out how, nor can I find the topic in the support section of the Apple site.

  • Is there a seeded HR Hierarchy change event

    I am building outbound SOA interface using BES, install is EBS 12.1.1 Is there a seeded event that fire when items are moved in HR Hierarchy? I tested with the following events subscribed: oracle.apps.per.api.organization.create_hr_organization oracl

  • To Physically Delete WBS in a Project- Urgent Help Needed

    Hi, In a process of physically Deleting WBS which contains other objects (network, activites) from a project , It requires us to cancel the Deletion Flag on the wbs .For this I am trying to use a Bapi BAPI_BUS2054_SET_STATUS, but to unset DLFL for a

  • Email trouble

    I have an msn email account on my iphone 4s. I am not able to send mail. The message says: The user name or password for SMTP:********@ smpt.live.com is incorrect. Help please! <Email Edited by Host>