HT4436 how can i setup one account for me and my kids ?

how can i setup one account for me and my kids ?

One account each, or one account for all of you to share?
Either way, follow the instructions here: http://www.apple.com/icloud/setup/
Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

Similar Messages

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • My husband and I both have iPhones . How do I use one account for purchases and keep the email separate when using iCloud?

    My husband and I both have iPhones . How do I use one iTunes account to share music, photos and apps, and keep our email accounts separate since all data will use the iCloud function.

    You shouldn't be using the same account on phone iphones. Have him setup his own and make sure his iCloud is logged in with that one

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • For some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

    for some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

    Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
    If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
    If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

  • HT1918 how can i setup  my account without a credit card

    how can i setup  my account without a credit card

    Thanks SniperKat but I don't know why for some reason the "NONE" disappeared...
    I started to create an account and when I saw the credit card thing I just clicked back and back and so I closed the browser... every free app or something free I get it appears a window : " You have to review some of your information about your account" .... but I don't have an account yet because I didn't create it.... the only solution is to create a new e-mail account and go to iTunes store and create a new account with the new e-mail and be very carefull with the "Free app" this time...

  • Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod?

    Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod and in her own iTunes?

    Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

  • How can I asociate an account for a product?

    Hi
    How can I associate an account for a product in SAP Business One 2005 A?
    Thank you

    Hi Bogdan,
    Maybe you can ask your question in the Channel Partner Solution Network. This Forum is about application features - INCLUDING Implementation:
    http://cpsn-channel.sap.com/businessoneforum
    You have a thread talking about this forum:
    Got a question about customization / implementation? Maybe ask it in CPSN!
    Hope it helps
    Trinidad.

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Use one account for apps and other for itunes match

    Hello everybody
    My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
    Thank you in advance

    I would strongly recommend you not do this.  You will regret it.
    I have played with this issue a lot.  You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there.  You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again.  This really is not what you want to do.
    Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music.  You don't want to go though the other process.
    Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
    all store purchases on an iphone are linked to the store id.  if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app.  You can't have two store id's signed into your iphone at the same time.  They are all linked together.

  • Pages:  How can I sort one column of words and not have it affect the other columns?

    How can I sort one column of words and not have it affect the other columns?  I have opened the inspector to the edit columns and rows under Table.  It will sort the column, but then it changes the other colums as well.  I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.

    Hi Peter,
    Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
    In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
    iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
    As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
    With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
    In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
    Regards,
    Barry

  • How can I make my account in syria and i have not acredt card

    how can I make my account in syria and i have not acredt card

    Sorry.  Don't believe that is possible.

  • How can i get best practice for SD and MM

    Please, can any body tell me how can i get best practices for SD and MM for functional approach?
    Thanks
    Utpal

    Hello Utpal,
    I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
    You will not find readymade document, you need to add this as per your requirement.
    btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
    New to Materials Management / Warehouse Management?
    Hope this helps.
    Regards
    Arif Mansuri

  • How can I modify one column of current and next record depending of some criteria?

    Having DDL
    CREATE TABLE #ServiceChange(
    [ID] [int] identity(1,1),
    [SHCOMP] [char](2) NOT NULL,
    [SHCRTD] [numeric](8, 0) NOT NULL,
    [SHCUST] [numeric](7, 0) NOT NULL,
    [SHDESC] [char](35) NOT NULL,
    [SHTYPE] [char](1) NOT NULL,
    [SHAMT] [numeric](9, 2) NOT NULL,
    [CBLNAM] [char](30) NOT NULL,
    [GROUPID] [char](2) NULL
    And original and desire data in below link
    https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
    I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
    The criteria is:
    Type should always flow F->T
    if current abs(amount)> next abs(amount) then groupid = 'PD'
    if current abs(amount)< next abs(amount) then groupid = 'PI'
    there is no case when those amounts will be equals
    where current(custid) = next(custid) and current(service) = next(service) and groupid is null
    Any help will be really apreciated.
    Thank you

    I tried that and got this error
    'LAG' is not a recognized built-in function name.
    You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
    ; WITH numbering AS (
       SELECT groupid,
              rowno = row_number()  OVER (PARTITION BY custid, service ORDER BY date, id)
       FROM   #ServiceChange
    ), CTE AS (
       SELECT a.groupid,
              CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
                   WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
              END AS newgroupid
       FROM  numbering a
       JOIN  numbering b ON b.custid  = a.custid
                        AND b.service = a.service
                        AND b.rowno   = a.rowno - 1
    UPDATE CTE
    SET   groupid = newgroupid
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for