HT4436 how do you verify the i cloud account?

how do i verify the icloud account   ?

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether.

Similar Messages

  • How do you verify the completeness of a restoration drill?

    One responsibility of the DBA is to ensure the database backups are usable. Running the restore / recover commands in rman is easy. However, how would you verify the correctness of the restoration? Or do you believe that when rman says it's Ok and oracle merrily open the database, then it's OK? And how about point-in-time recovery (which seems even more difficult to verify)?
    (Even though this is a generic question, here is the a database version if needed as basis of discussion:
    Oracle: 10.2.0.4
    OS: RHEL 4
    Edited by: thtsang on Oct 15, 2010 11:06 AM

    I would prefer the verification to be done in database perspective. If there is no data loss / inconsistence in the database, it should also be OK for the application.
    And if queries on key tables were used, has any one experienced any issue? If so, what's the cause and what's the resolution? And for restoration for hot backup or point in time recovery, it is difficult to confirm what's correct result, because the data was not fixed during the restoration.

  • HT204053 how do you verify your icloud email account?

    How do you verify your icloud email account?

    Log in at http://appleid.apple.com to resend the verification email.

  • HT4436 i want to verify my i cloud account ....how??

    i want to verify my i cloud account ....how??

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account.
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether.

  • How do you verify the source......

    after I download Adobe Reader I receive this message. "download incomplete,the installation source for this product is not available.Verify the source exists and you can access it"
    I also tryed to uninstall,but the same message appears
    So what is a guy supposed to do now
    Thanks
    Joseph DeConda

    The first part of that message means your firewall most likely has blocked access ot the download link.
    When you see it during an uninstall, it means it's trying to remove a fiel that no longer exists.
    Download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    You may need to disable your antivirus if you continue to see the "source not available" message.

  • How do you verify the itunes store terms of agreement for the IPad?

    I tried to buy a movie but it said to verify the terms of agreement. So I followed the link but it doesn't have the agree button (or anything related to the agree button) anywhere

    If you mean in the Downloads tab at the bottom of the iTunes app then you shouldn't need to. That tab just shows whether you have any available downloads from iTunes, if there aren't any then you just get the Terms link. If you've bought the film then it should have downloaded into the Videos app where you should be able to watch it.

  • HT4436 how do i have multiple i cloud accounts on one computer

    each member of my family has i-phones or i pads but only 1 computer how does each i- cloud account save there pics and calenders to the same pc

    Set up separate user accounts for everyone.  Then each user can sign into their own iCloud account within their user account.

  • How do you make the creative cloud actually load?

    On the task bar for Mac, when I click on the Adobe Creative Cloud icon, it pulls up. But it never actually loads. How do I fix this?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall, Download Adobe Creative Cloud apps | Free Adobe CC trial

  • How do you verify the size of a large ( 32K) plain text body

    Hello All,
    I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
    When I attempt to process a message, that contains only a plain text body with a size (in bytes) of 64,382 - the following sizes are reported by objects extracted from GroupWise, via SOAP calls:
    Message Size: 71,425 (should be bigger than the plain text body).
    Message Part [0] length: 70,854 - no idea where this value comes from
    In the getAttachmentResponse object, the part has:
    length: 87,772 - Which matches the Base64 encoded length, plus padding, of the plain text.
    The actual size of the plain text (on disk): 64,382
    I am hoping to use the HTTP GET method for extracting the large plain text object, which means that I will not have access to the getAttachmentResponse object.
    So my question is, based on the MessageBody, MessagePart[0] length of 70,854 - is there a formula, or other way to determine the correct expected byte size of the plain text object to enable me to verify that the HTTP GET operation or the SOAP getAttachmentRequest completed correctly?
    Regards,
    Dave Stiller.

    Hey Preston,
    Thanks for the prompt response. Not the answer that I was seeking, but none the less an answer. Thanks.
    Can I suggest an enhancement for a future release, to add an additional structure to the message object that allows you to detail the available formats and byte sizes of the formats that relate to the message body object. This could even be an extension/completion of the MessagePart object array on the Message Body. (One array component for each available format.) There are no issues when dealing with large body texts as attachments, but an accurate byte count is important to me.
    This will enable us to verify that the message body content, downloaded from GroupWise, has not be corrupted during transfer - particularly important when using HTTP requests.
    Have a great day,
    Dave...
    Originally Posted by Preston Stephenson
    You will have to be careful in getting message bodies.
    The plain text message body can come from different
    sources and / or formats.
    The message body can be stored in RTF format.
    You can extract the plain text from the RTF text.
    If there is a text.htm message body attachment, the
    GW Client will extract the text plain text from the
    text.htm attachment and will ignore the text plain
    message body attachment.
    There can be corruptions in the message body
    attachment. The attachment can report a certain
    size, but the actual data may be different.
    You have to assume what is stored / returned is
    correct. If you are bound and determined to read
    the number of bytes recorded, you can cause
    problems. There was one case where the attachment
    was corrupt. The POA returned all the data that
    was available. The application tried to read past
    the end of the valid data and caused the POA to
    crash.
    You get all of the data in one HTTP GET call. In
    that case, the "Content-Length" header will have
    the number of bytes in the message body attachment.
    Preston
    >>> On Sunday, August 12, 2012 at 11:36 PM,
    stillerd<[email protected]> wrote:
    > Hello All,
    >
    > I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
    >
    > When I attempt to process a message, that contains only a plain text
    > body with a size (in bytes) of 64,382 ‑ the following sizes are
    reported
    > by objects extracted from GroupWise, via SOAP calls:
    >
    > Message Size: 71,425 (should be bigger than the plain text body).
    > Message Part [0] length: 70,854 ‑ no idea where this value comes from
    >
    > In the getAttachmentResponse object, the part has:
    > length: 87,772 ‑ Which matches the Base64 encoded length, plus padding,
    > of the plain text.
    >
    > The actual size of the plain text (on disk): 64,382
    >
    > I am hoping to use the HTTP GET method for extracting the large plain
    > text object, which means that I will not have access to the
    > getAttachmentResponse object.
    >
    > So my question is, based on the MessageBody, MessagePart[0] length of
    > 70,854 ‑ is there a formula, or other way to determine the correct
    > expected byte size of the plain text object to enable me to verify that
    > the HTTP GET operation or the SOAP getAttachmentRequest completed
    > correctly?
    >
    > Regards,
    > Dave Stiller.

  • How can you verify the digital signature inside a form?

    I see Adobe has a separate solution called Echosign but how to use both forms and signature together?

    Hi,
    this is indeed possible.
    You can check if the change value is larger than one character.
    If so, the change value is pasted from the clipboard.
    All you need is to add this Script (FormCalc) to the change event of your field.
    if (Len($event.change) gt 1) then
              $event.change = ""
    endif

  • HT204053 How do I edit the I cloud account email it is using?

    My wife was the last to update to a new phone and when she went to start using iCloud she set it up using her email info instead of the account that it is set up under on which is the family's.  I cannot seem to edit this email for @icloud.com and @me.com.
    Anyone have an know how to correct this.

    Sure. In the settings -> iCloud, scroll down to the bottom and click "Delete Account".  This will delete your daughter's account from your iPhone.  Then sign in with your credentials.

  • HT201317 how do i access the i cloud from a laptop

    how do you assess the i cloud from a lap top

    Because an employer's '''''servers''''' generally track and keep a record of what you are doing on your work computer. Every outgoing connection is logged and kept by the employer's '''''servers''''' that establish internet connections for all of your internet usage at work. It would be very, very rare to have servers in a home set-up.

  • How do you turn the cloud OFF on an iPhone 4s?

    How do you turn the cloud OFF on an iPhone 4s? I don't use the cloud, but my phone keeps telling me there's not enough storage to back my phone up.

    iCloud is probably being used to store your Contacts so perhaps you really just want to turn off iCloud backups. Use the Settings app.
    Settings > iCloud > Turn off Backup
    After you turn off iCloud backup be sure to initiate some other backup strategy. Backing up to iTunes is a good alternative.

  • HT3576 How do you, verify that the network or firewall is not blocking access to port 5223.

    How do you, verify that the network or firewall is not blocking access to port 5223.

    Maybe:
    http://answers.yahoo.com/question/index?qid=20110606132954AAZH4Tc
    http://forum1.netgear.com/showthread.php?t=48533

  • HT1438 How do you edit the content of i cloud?

    How do you edit the content of i cloud?

    The feature is not supported in Pages.
    See these earlier discussions of similar questions:
    Re: Compare documents in Pages as you do in MS Word
    Re: can you do document compare in pages, can you do document compare in pages
    Re: App to compare two pages files?
    Dale Gillard offers some useful comments in the last linked discussion.
    Requests for feature enhamcements or additions should be made via the Feedback channel. You'll find Provide Pages Feedback in the Pages menu in Pages '09.
    Regards,
    Barry

Maybe you are looking for