HT4437 I get good response when I use the remote app but when I try and use airplay it could be five minutes between frames. Any ideas?

Seems to work very sporadically on airplay but no problem on Remove app.

Hi Bob,
When I went to see what version of the TDM Excel Add-in I had installed, I discovered that my previously working TDM Excel Add-in was suddenly exactly reproducing your symptoms (totally unresponsive) -- I too have Win XP SP2 and Excel 2003. I then followed the steps from the web site that Julia posted above:
1) Manually deleted the TDM Excel Add-in from the Excel toolbar
2) Manually uninstalled the "Excel TDM Add-in" from "Add and Remove Programs"
3) Manually installed the "Excel TDM Add-in" from this web page:
http://zone.ni.com/devzone/cda/epd/p/id/2944
Now when I restart Excel, I get the floating TDM Excel Add-in icons, and they work perfectly. I was able to verify that the version that works on my computer is indeed 2.0.1.4. By the way, how do you know what version you're using, if the "About" icon is unresponsive?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

I used to able to access and listen to my itunes library from my ipad using the remote app but this no longer works. I am connected but sound thru ipad. Is this because of they want us to use itunes match

I used to able to access and listen to my itunes library on my ipad using the remote app but this no longer works. I am connected but sound thru ipad- just controls my library on iMac. Is this because of they want us to use itunes match

That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
To play for example iTunes imusic on iPad
You need to have Home Sharing On.
Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
Start iPad's Music app, tap the ... More (bottom right), tap Shared.
Choose your iTunes' library and have fun.

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan

HT4623 I updated my iPod touch to 6.0 iOS and the bejeweled app but when trying to connect to Facebook, I get a message stating that cannot be use on mobile to go to web or something like that

I updated my iPod touch to 6.0 iOS and the bejeweled app but when trying to connect to Facebook, I get a message stating that cannot be use on mobile to go to web or something like that.....what can I do?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT

IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy

I can see my contacts in my iPad using the contacts app, but i cannot see a single contact being synced to the iCloud contacts section when i use my computer to log into the iCloud website?

i can see my contacts in my iPad using the contacts app, but i cannot see a single contact being synced to the iCloud contacts section when i use my computer to log into the iCloud website?

I am signed into the iCloud and contacts are turned on in the iCloud settings on my iPad. the iCloud account is checked in the groups area of the contacts settings. the calendar is turned on the same way and that syncs to iCloud...just not contacts.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

Okay, I seem to have solved the problem I posted about earlier. I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French. When I switched it back to American English, my password worked when waking the computer from sleep mode. I have no idea why changing the language preference would affect the way the password works but that seems to have been the case. I'll post again if I experience more problems.

HT4437 I get good response when I use the remote app but when I try and use airplay it could be five minutes between frames. Any ideas?

Similar Messages

Maybe you are looking for