HT4477 One complete family file missing after installing iPhoto 11 ??

One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

Similar Messages

  • Missing file system after installing in SSD

    Missing file system after installing in SSD MacBook
    Hi All
    I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
    When i reboot the machine with the new disk I get the image of a folder with question mark.
    If i reboot the machine again and hold the alt key at the chime I can see two disks.
    One called SSD and another called Recovery.
    if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
    it tells me that everything is fine.
    Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

    Hi i tried this and just got the big symbol of doom at start up.
    However, a little terminal witchcraft did the trick!
    sudo bless -mount /Volumes/"Macintosh HD" -setBoot

  • Libm.so.1 and other libraries, missing after install

    I'm running into problems because libm.so.1 and some other libraries are missing after install.
    - Solaris 8
    - Not an LD_LIBRARY_PATH issue, I did a full FIND and it did not show up.
    Any information as to why these libraries may have gone missing and what I might do to get around this problem would be appreciated.
    Thanks,
    -Ken

    Cause: The installation which caused this symptomology was based on a boot from a downloaded ISO designated "Installation CD" (Solaris 8). Booting from, and installing based on this CD caused a incomplete installation, with many libraries missing.
    Solution: Just by chance, on a re-installation attempt I booted from 'Software 1 of 2 CD" (Solaris 8). Installation based this boot yielded a complete installation - no libraries missing.
    Thanks for the suggestions,
    -Ken

  • It's very slow to access file server after installed SP1 of Win7.

    I found it's become very slow to access shared files on file server after installed win7 SP1, (windows6.1-KB976932-X86.exe),  access same file, the win7 without sp1 is fast in 5 secs, but the pc with sp1 need more than 30 secs. And
    I tried to removed the sp1, everything goes fine, access fast as others.
    I don't understand what's the reason and which feature affected it, I believe the sp1 can help Win7 be more safety, but why the performance on it get worse.
    And I didn't find the same question or tips on forum or website, do you really haven't the issue?
    Arnold From Shanghai, China
    Arnold Yu

    Hi Arnold,
    Windows 7 Service pack and any other Windows Updates are released to improve the performance, reliability and security of the system.
    Firstly please run the performance troubleshooter:
    Open the Performance troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
    If it doesn't resolve the issue, Put the computer in
    Clean Boot and then check to see if the issue persists.
    If it still persists, please use performance monitor to trace your computer's performance:
    Performance Monitoring Getting Started Guide
    http://technet.microsoft.com/en-us/library/dd744567(v=ws.10).aspx
    Karen Hu
    TechNet Community Support

  • Files missing from install directory

    not sure what's happened to my computer but I can no longer install programs or updates for programs as I get the message "files missing from install directory"
    How did they get corrupt in the first place? I get this when trying to download yahoo messenger of all programs...duh!  I'm getting pretty frustrated since this has only started a month ago and I've been hoping something would fix itself but no....the last time my Toshiba service station updated was Jan 24 and now it says unable to connect with server....yet I got here to post a message and can get to the internet so don't understand why the updates can get in?
    any advice?

    that can be a problem with your windows.. your OS..
    rebuilding your OS should be able to fix it.
    oOo
    *Read EULA before installing any software.
    √

  • After installing iphoto 9.5 some of my  projects are  completely or partly empty after regenerating, how can I get them back?

    After installing iphoto 9.5 some of my  projects (photobooks) are  completely or partly empty after regenerating, how can I get them back?

    Define "everything" because if you've tried everything then your last recourse is:
    1 - restore your backup copy of your iPhoto Library created just prior to your Yosemite upgrade or
    2 - Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.

  • Camera roll app gone after installing iPhoto

    My Camera Roll app is no longer to be found on my Gen 3 iPad after installing iPhoto. I've reset my iPad, though i haven't erased all content and settings, and I cannot get it back. Am I relegated to the "scorched earth" solution of backing up and erasing all my data?

    "If you are using the Camera app and take a shot, you can see your Camera Roll (bottom right) and when you tap on it, it will bring out the Camera Roll. Those shots are also in Photos app > Photos.
    Note: There's no Camera Roll app."
    Sorry, correction in the statement above : should be (bottom left).

  • After installing iPhoto 08, I can no longer synch photos to my 5G ipod

    After installing iPhoto '08, I can no longer synch my iphoto library to my ipod. It comes up with a cryptic error message that says "an unknown error occurred" and lists it as -50.
    I have done a FULL RESTORE on my ipod and got the same error immediately upon trying to synch the iphoto instead of a directory (gets the error after pressing the apply button in itunes).

    I'm not much help here, but I've had a similar (but slightly different) problem. I have my iPhoto library on an external drive. After installing iPhoto '08, iTunes no longer recognized my iPhoto library, and it won't let me select it. I had over 10,000 photos synced with my iPod. Now I have none.

  • How do you get outlook to work after installing iphoto

    has anybody been able to successfully start Outlook after installing Iphoto. I have downloaded all the updated fixes, and rebuilt Outlook's data base. but Outlook will not start...
    Thanks in advance.

    Why do you think installing iPhoto affects Outlook? I would ask that on an Outlook forum.
    Regards
    TD

  • Excel 2010 SP2 opens files slowly after installing SP2

    After installing SP2 Excel is opening files very slowly. Files can be on network share or locally, no matter. If Excel is already open, then the file opens fast as it has opened before. OS is Windows 7 64-bit, and Office Professional Plus is 32-bit. Ecxel
    itself opens fast, but is slow when I double click file. Slow is about 12 seconds and fast is about 1 second with a 31 KB file from network. Network itself seems to be OK, anf Word files open fast.

    From your description, I understand that you open EXCEL 2010 SP2 32-bit slowly in Windows 7 64bit.
    Try to start Excel in safe mode. Then, open the Excel file.
    Start the Excel program in safe mode
    1.       Click Start, point to All Programs, and then point to Microsoft Office.
    2.        Press and hold the CTRL key, and then click the Microsoft Excel.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them.
    Normally, you could do the following to disable the conflict add-ins in your Excel program:
    Disable add-ins
    Click File menu, click Options >  Add-in, click Go button in the Manage: Com-in Add.
    Check if there are any add-ins, clear the checkbox to disable them.
    Close the Office program and restart it.
    Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
    Please take your time to try the suggestions and let me know the results at your earliest convenience.  If anything is unclear or if there is anything I can do for you, please feel free to let me know.
    Is the performance also slow when you trying to open?
    At this time, we can also try to test this issue in the clean boot mode.
    Test in Clean boot Mode
    ===============
    Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
    1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
               Note: If prompted, please click Continue on the User Account Control (UAC) window.
    2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
    3.       Click the "Startup" tab, click "Disable All" and click "OK".
    Then, restart computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
    Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.

  • ORA-00205: error in identifying control file..after installing ASM

    Hi
    I haveoracle database 10g running on a redhat4 mechine.
    i have installed ASM and migrate my database to ASM.
    I haven't any problem and everything was fine till i reboot the mechine for the first time after
    installing ASM.
    I got the ORA-00205: error in identifying control file, check alert log for more info
    error when database was restarting
    any one can help me out of this problem
    many many thanks in advance

    eventually I figured out what the problem is.
    The problem is about my dbora file used to start my database.
    this is the whole story!!!
    I have a oracle 10gR2 installed on Redhat linux AS 4.
    I have configured my database to work on ASM.All the configuration have set properly
    and every thing is fine except the Automatic starting the database in time
    the mechine is restarted.
    when i restart the mechine with nothing in dbora(used to automatically start the database)
    and start everything after logging into oracle user(listener ,database,Enterprise manager)
    no problem(i can see my ASM instance database instance throught Enterprise managaer).
    but when i use dbora to do that i get this error appear in enterprise manager
    ORA-12528: TNS:listener: all appropriate instances are blocking new connections (DBD ERROR: OCIServerAttach)
    this is the content of dbora:
    s script is intended to allow the automated
    # startup and shutdown of an oracle database server.
    # Author: Sean O'Donnell <[email protected]>
    # the user that oracle runs as (default: oracle)
    ORACLE=oracle
    # database instance id
    ORACLE_SID=orcl
    # ORACLE_HOME (file system) path
    ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
    PATH=${PATH}:$ORACLE_HOME/bin
    export ORACLE_SID ORACLE_HOME PATH
    case $1 in
    'start')
    su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl start"
    su - $ORACLE -c "$ORACLE_HOME/bin/dbstart"
    su - $ORACLE -c "$ORACLE_HOME/bin/emctl start dbconsole"
    'stop')
    su - $ORACLE -c "$ORACLE_HOME/bin/emctl stop dbconsole"
    su - $ORACLE -c "$ORACLE_HOME/bin/dbshut"
    su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl stop"
    echo "usage: $0 {start|stop}"
    esac
    exit
    What do u think could be the reason?!!!!
    thank you in advance

  • Start up message says file missing, re-install

    I downloaded CS4 and since then I receive this start up message:
    "One or more files in the Adobe Application Supprt folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop."
    I did that, the message is still there, but PS seems to run fine. How do I get rid of the message?
    Mac OS 10.5.7
    Thanks.

    Okay, I had already tried reinstalling it, but I tried it again just in case and it worked. Thanks and good night!

  • MSVCR80.dll file missing (after latest iTunes update).  Unable to reinstall iTunes either.  Fixes?

    After installing the latest iTunes update, I am unable to open iTunes (The program can't start because MSVCR80.dll is missing from your computer).  Plugging in my iDevices won't prompt iTunes to open, either (they are viewed only as mass storage devices).  I attempted to reinstall iTunes, but recieved an error message that said I had insufficient rights to install (I am an administrator).  Is anyone else having similar problems?  Is there a way to fix it that won't include uninstalling the current version of iTunes?  Don't want to lose all my files!  Thanks for a rapid response, Community.  I appreciate all the help I can get.

    Hi bookishwench,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • Icon missing after installed Adobe

    Hello,
    Does anyone have the mac icons missing issue after installed adobe creative cloud installer?
    My macbook pro icons were missing (didn't show) right after I installed Adobe Creative Cloud Installer (download from Adobe website).
    At first, I thought the issue is my machine, so I went to apple store genius bar and left my mac for a week to let them find out the reason.
    Apple erased my system and reinstalled it, and machine passed all the diagnose test.
    Yesterday, I got my mac at apple retail store and everything was normal (no icon missing).
    Right after I installed Adobe Creative Cloud Installer, the icons were missing. Then, I uninstalled Adobe Creative Cloud Installer, everything was back to normal, including icons were back.
    I have no idea how this happen and why. But according to apple, they told me it should be the software issue and ask adobe for help. Adobe there is no phone call support form Adobe.
    Does anyone have the same issue like this, or does anyone know how to solve the issue?

    Hi Jeff,
    Thank you for your reply. Please see the screenshot.
    This is when I try to create a folder, it happens like this.
    The second one is after I close this folder and reopen it. Please the second image.
    The last image is very funny which I am not able to see anything form applications folder. But, actually, there are a lot of things. As you can see from Dock, there are many things like imessage, Photoshop, chrome etc. They just not shown!
    I can only uninstaller the Adobe Creative Cloud Installer to solve it.
    Do you have any idea how to solve it by any chance? Apple said it was caused by the software. They even replaced my logic board to solve it, but they still couldn't.

  • Sound missing after installing windows 8.1 pro.

    hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
    product name:  laptop hp 620.
    a day before this, i had windows 7 and everything worked fine.  tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

    Hi:
    The only suggestion I can offer would be to try a W8.1 IDT audio driver...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

Maybe you are looking for