HT4489 Can iCloud read a v-card (.vcf) exported by Outlook 2003?

I just set up iCloud and got my iPhone contacts up there. I noticed it will import & export v-cards. I tried exporting one but have no idea where it went on my PC (Windows Vista). I tried importing one which I had exported from Outlook 2003 but got a message that there was a problem. Here's the text of my v-card (with the personal data changed):
BEGIN:VCARD
VERSION:2.1
N:Wilson;George
FN:Wilson, Geroge
NOTE;ENCODING=QUOTED-PRINTABLE:12/24/2011: I think she is in our Book Club. Friend of Janet's. I was suppos=
ed to contact her on Facebook.=0D=0A
EMAIL;PREF;INTERNET:[email protected]
REV:20111224T152448Z
END:VCARD
Any ideas?

Is anybody who knows anything at Apple reading all these posts. Nobody can import a vcard into icloud. Schmucky software by Apple.

Similar Messages

HT204384 my iMAC can't read the SD card. Any ideas?

My iMAC can't read the SD card of my Canon camera. I've tried reinserting slowly and quickly and dusting it. My camera can see the pictures on the SD card, which is only two months old. The same thing happened a few months ago. I figured it was an old card and probably damaged so bought a new one but this one has the same problem. my port was checked in store a couple of months ago too. I am running out of ideas....

fionten wrote:
My iMAC can't read the SD card of my Canon camera. I've tried reinserting slowly and quickly and dusting it. My camera can see the pictures on the SD card, which is only two months old. The same thing happened a few months ago. I figured it was an old card and probably damaged so bought a new one but this one has the same problem. my port was checked in store a couple of months ago too. I am running out of ideas....
How long has it been since you fully formatted the SD in the camera? I ask because some cameras are very good at messing up the card just enough that while they can read/write to it fine other systems may be confused. All it takes is a minor firmware glitch.
If you haven't hard formatted the SD in the camera for a while try downloading your pictures by connecting the camera to the iMac via USB. After the download is complete--and you have verified that it is full and complete--format the SD in the camera, snap a photo, then try connecting the SD directly to the iMac.
Might not work, but worth a try as it's free to do.
Another thing is to make sure that the firmware in your camera is up to date.

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

TS1368 I can not read my itune card number 1/2 off $50.00 just by two hours ago

I cann't read my itune card 1/2 numbers our gone this is a number on button of card pbh6063300000277635976 got it at hy vee in wascea minn

See this support article:
http://support.apple.com/kb/TS1292
If you can't get the card to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I have an iphone 3GS. i updated it to the latest software but it can not read the sim card plse help me

i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help

Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.

Lumia 820 can't read my SD card

Hi,
I've got a strange problem with my microSDHC card (ADATA 16GB Class10). My 820 can't recognize it. There's no 'problem information' - the smartphone just doesn't see it. There's only internal storage able to use... I've done phone reset, I've done card formatting (to FAT24, ExFAT, NTFS) but there was the same problem every single time, again and again... I spent a lot of time and cash for buying this lumia and the card and now I am disappointed despite the smartphone is great... But without the storage it's almost useless.
Can you help me? What can I do? My card seems to be fine, because my notebook reads it perfectly. I can save and read files with no problems so I've got no idea what is going on...
I need help as soon as possible, so please write me back, thanks guys

Sidek wrote:
thanks for your response. Yes, now I see it but there are many people who have class10 and no problem with it.
Strange, what I see is almost exclusively people with Class 10 which have the problem. I am not aware of any MS updates which are specifically directed at solving this issue, although that does not mean that there isn't one in the works.

CBT 3.4 can't read MC20x20 Line Card

Dear All,
I have a CBT (Cisco Broadband Troubleshooter) v 3.4 apllication installed in our network. However, it can't read MC20x20 Linecard in the spectrum analyzer for the example. I read in the documentation that is supported. In our system, it only can read MC5x20.
Is there some configurations to do that?
please help me if you have some experience to solve this issue. thank you
BR,
Ivan

I have try and find that the CBT 3.4 can't read MC20x20 in SCG/SCH IOS version, but it can read in SCD version. let me know if someone can use CBT3.4 and read in SCG/SCH IOS version.

Can't read attached files to older emails in Outlook 2010

Hello,
I have Outlook 2010 connected with MS Exchange.
I can’t read attached files to older emails than 3 months. In attached elements there are only small files and I’m not able to open them (size in Bytes!) - double click doesn't work. I've tried different solutions:
1. https://social.technet.microsoft.com/Forums/en-US/dd2869cb-5e53-4852-b0bb-15de6653db0c/dont-see-attachments-in-old-emails-on-outlook-2013?forum=outlook
2. https://social.technet.microsoft.com/Forums/office/en-US/cbd420f1-ec7f-44ae-8f78-c7613e2eabb6/unable-to-retrieve-attach-document-for-older-emails-in-outlook-2010?forum=outlook
3. Clear cache in Advanced Settings of Forms and clear C:\Users\%username%\AppData\Local\Microsoft\FORMS
None of them works
Thanks in advance

Hi,
Can you read the attachments if we logon in OWA? If attachments can be read in OWA, we may try to delete the original OST file and restart Outlook to sync a new one to see the result. If still no luck, we can create a new mail profile in Control Panel to
check the result. See:
http://support.microsoft.com/kb/829918
If same issue continues in OWA, you may need to recover the data from the backup you create before.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How can I synch ONLY the default 'contacts' folder in Outlook 2003?

I am using Outlook 2003 SP3. In my 'contacts' menu I have 3 folders: 'Contacts', 'iPhone' and 'Old.' I created 'iPhone' and 'Old' folders and 'Contacts' was the default folder. When I synch my 3G iPhone with Outlook I want to synch ONLY the default 'contacts' folder. But I can't seem to do this. My options are to synch all folders or a selection of non-default folders (i.e., anything but 'Contacts.')
Does this make sense? I don't want to synch anything in the 'old' folder to my iphone. But I also don't want to move all of my current contacts to a special folder just so I can synch only these items.
So when I synch my iPhone I want it to limit the synching to only the default 'contacts' folder.
Is there a way to do this?

Open one of the folders that keeps changing. Set it to the view mode you prefer. Press Command-J (Show View Options in View menu).
At the top of the View Options screen is an item which allows one to set "Always open in xxx view". Chekmark that.
Repeat for each folder you want.
This is a per-folder setting. Note that the View Options screen is 'live" - you can leave it open, and as you open successive folders it will display the settings for each in turn.

Reader X: Attaching PDF to email in Outlook 2003

Since installing Reader X, it takes several minutes to attach a PDF to an email when using Outlook 2003 (installed on Windows XP SP3, with Outlook and Windows fully patched, running McAfee VirusScan for AV).
This occurs with any pdf document, regardless of size (all my tests have been on documents less than 70KB, attached from the local hard drive). Attaching any other file format is unaffected and only takes a second.
This problem does not occur for anyone that is using Outlook 2010.
Can anyone advise what is causing this / how to fix?
Thanks

The only solutions I have found are to either downgrade Adobe Reader to 9.3.4 or upgrade Office to at least 2007
Not really the best solutions - would prefer a proper fix.

I just recently purchased an Iphone 5c. I damaged the sim card reader by accident and now the phone can't read my sim card. I was wondering if I can bring my phone in to an apple store and will they install one into the phone for me? And if so how much $$

So can I bring the Phone in to get a new sim card readser repaired? And if yes would the one year warranty every ihpone have cover the repair, or will I have to pay. And if I have to pay, about how much money will it cost.

Contact the Apple store and ask them.
Officially Apple does not sell parts.

ITunes can't read my media card

I can't burn to a CD from iTunes, but can burn to a CD using other software

Can anyone suggest where to download Ifun box? I downloaded a version from what I thought was a reliable it and it was full of spyware. Got rid of the spyware (I think) but it was tremendous headache and I still have the original I phone problem (not being read by itunes). Thanks.

How can I read a SDHC card on my iMac version 10.6.8

I have been able to import the old SD versions, using the port on the side of my keyboard. The same reader does not work with the new SDHC card.

Check your Readers class, see > Secure Digital - Wikipedia, the free encyclopedia
If it's to old, then you will need a newer one. > usb card readers - Google Search

Can't read my iTunes card code

Anyone know how to redeem an unreadable iTunes code ?

With any luck, the following document may be of some assistance with that:
iTunes Store: Invalid, inactive, or illegible codes

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

HT4489 Can iCloud read a v-card (.vcf) exported by Outlook 2003?

Similar Messages

Maybe you are looking for