HT4489 I am not able to make iCloud read VCards which were exported from Outlook. The constraints mentioned on the website per contact en for the total are nog exceeded. Thank you. John

I am trying to import Outlook contacts from a Windows PC to my iPhone.
The message that iCmoud on my Windows PC gives is "Could not import some contacts". The "Learn More" button gives a number of limitations for Vcards which are not exceeded by the files I want to import.
Anyone with an idea?
Thank you!
Johan

Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni

Similar Messages

  • Not able to see that particular query which is executed from application

    Hi Friends,
    I have one application which is executing a number of queries in the current session. I want to know which query is taking how much time?
    So I have executed following query in Toad for this purpose, but this is giving details of those queries only which are executed from either Toad or SQL developer.
    I am not able to see that particular query which is executed from application. Please suggest me if I am missing something.
    select ss.schemaname,ss.machine,ss.program,ss.logon_time,ss.sql_exec_start,ss.wait_time,
    sa.first_load_time,sa.application_wait_time,sa.plsql_exec_time,sa.cpu_time,sa.elapsed_time,sa.sql_fulltext
    from v$session ss, v$sqlarea sa
    where sa.hash_value=ss.sql_hash_value
    order by sa.first_load_time desc;
    Oracle Version - Release 11.2.0.1.0 Production
    Toad Version - 9.5.0.31
    Regards,
    Sachin

    Dear Friends,
    is there any option for this through Oracle Enterprise Manager 11g?
    Actually I have done little bit research on EM console and go through SQL Monitoring Executions page but did not get the particular query details executed through the application.
    I have also checked the link - AWR Baseline but not get any result.
    As I am new in database administration activities, Please help me regarding this. You can also suggest me other solution except Oracle EM console.
    Thanks.
    Sachin Jaiswal

  • HT4489 I am not able to transfer my in spite of VCf format from my computer to my iPhone 5S...can you pls suggest some way to do it as fast as possible

    Can you pls solve my issue......I am not able to transfer my in spite of VCf format from my computer to my iPhone 5S...can you pls suggest some way to do it as fast as possible

    What happens when you follow this?
    http://support.apple.com/kb/PH3605

  • Can not edit Calendar Items on iPhone 4 that were sent from Outlook 2013

    Hi Folks,
    When receiving a calendar item from Outlook 2013, I can accept it, but not edit it. When I receive the same item from Outlook 2003, I can accept AND edit.
    How can I edit calendar items sent from Outlook 2013?
    We are not using an Exchange server, simply sending the calendar items via email. We noticed this when we upgraded our office from MS Office 2003 to 2013.
    Thank you so much for your help!
    Ben Bolduc

    Are you sure the Outlook 2013 calendar entries are set set to shared?
    The following thread seems to document and discuss the topic well:
    http://community.office365.com/en-us/forums/158/t/171357.aspx

  • Why i am not able to transfer my mp4 videos to my ipad from my pc, why i am not able to transfer my mp4 videos to my ipad from my pc

    why i am not able to transfer my mp4 videos to my ipad from my pc

    Sign in to iTunes store with your Apple ID on the PC, and download your purchases there.

  • HT1222 I bought used iPhone and on this iPhone I'm not able to make new account  on i Cloud'.  How can I use this iCloud's on used iPhone   Please help me

    I bought used iPhone and on this iPhone I'm not able to make new account  on i Cloud'.  How can I use this iCloud's on used iPhone   Please help me
    When I logging there it told me that maximum no of iCloud's Account already activated on this iPhone.
    Please help me how can I open new iCloud's account on this iPhone
    Regard
    Faiz khan

    Set up the account using a desktop or laptop, then sign
    into that account on your iPhone.
    I am not aware of any method around the restriction once
    the maximum has been created on any individual iPhne.

  • I am not able to make International calls from iPhone 5s

    I got this new iphone 5s as a gift a week days ago, and It was working all great for 2-3 days. But from last 4days i AM not able to make international calls
    Whenever I dial, I can't hear any ring going on and all I can hear is my own voice reverting back to me. Moreoever I am being charged for every call I make. I tried restarting my device, Also by connecting to itunes to find if any Update is needed but it says my iOS7 is recent no updates needed.
    Urgent help needed
    Thanks in advance.

    A call is a call so far as the phone is concerned. Internation or across the street, it doesn't diferentiate between them.
    Contact your carrier.

  • HT4847 I have a new iphone and cannot delete the backup from icloud.  It says that it is in use.  I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

    I have a new iphone and cannot delete the backup from icloud.  It says that it is in use.  I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

    Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

  • Not able to make any call with my lumia 710

    Not able to make any call with my lumia 710 though other then call everything is working fine. I chacked my SIM in other phone, i there phone i can make calls. Whats wrong with my phone?

    hi
    i am using nokia lumia since last 6 months. i am having aitel connection. till few days back i was able to make phone calls however now phone calls are immediately getting ended.  i m able to send sms, receive calls and use intenel..problem presisits only with receiving call..
    suggest me a way out..plz..

  • Report Builder 3.0 Expression i am not able to make it work on Oracle DB Table

    Hi,
    I am newbie to SSRS Report Builder 3.0 so please be patient with me. I am trying to create a report to query Remedy Ticketing System and it uses Oracle Database installed on a Unix OS...My end objective is to do some calculation on the ticket metrics (i.e.
    percentage of tickets closed within SLA, etc) however i am stuck from the very beginning where i am not able to make my expression work...
    To begin with. my query statement...
    Select Distinct TICKET_NUMBER, Assigned_Group, Category, REGION, TICKET_STATUS,EXCEEDED_SLA, TO_CHAR(date '1970-01-01' + (TICKET_CREATION_DATE/60/60/24), 'DD/MON/YYYY HH:MI:SS AM')TICKET_CREATION_DATE
    from ARADMIN.Request
    where (Assigned_Group like 'HOTS' OR Assigned_Group like 'PAID' OR Category like 'HVD%') and TICKET_CREATION_DATE > (TO_DATE('31/DEC/2014 11:59:59 PM','DD/MON/YYYY HH:MI:SS PM', 'NLS_DATE_LANGUAGE=AMERICAN') - DATE '1970-01-01')*60*60*24
    order by ticket_creation_date
    the data type of the oracle table:
    Here is the Query Result of the DataSet:
    Basically Ticket_Status has values from 0 to 4 although from the screenshot above you only see 2 and 4...
    Ticket_Status 0 - Means Open Ticket
    Ticket_Status 1 - Means Work In Progress Ticket
    Ticket_Status 2 - Means Pending Ticket
    Ticket_Status 3 - Means Awaiting Closure Ticket
    Ticket_Status 4 - Means Closed Ticket
    I created a chart column using the expression below but it did not work...what i mean by it does not work is that the chart column output shows all Ticket_Status total count including 0, 1, 2, 3, & 4 (i.e. total count of tickets are 206)...using
    the expression i was only expecting the total count for Ticket_Status 4  (i.e. 180 tickets) but i guess i am doing something wrong with the expression syntax...
    =Count(Fields!TICKET_STATUS.Value=4) 
    i also used the expression below but it did not work...
    =Count(Fields!TICKET_STATUS.Value="4")
    i converted the Ticket_Status to CHAR on the dataset using the TO_CHAR(Ticket_Status) AS Ticket_Status then i tried the expression below but did not work...
    =Count(Fields!TICKET_STATUS.Value="4")
    i tried again the expression below but did not work'
    =Count(Fields!TICKET_STATUS.Value=4) 
    i cannot proceed to the arithmetic calculation if i cannot filter my dataset with the correct value...again i am a newbie with SSRS & report builder and i would appreciate it very much if you can guide/help me :-)

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

    I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

    Many people are having probalems with this right now.  The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591.  This only works if you still have access to your old email account.  If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

  • I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

  • I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

    I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

    You can't back up to iCloud until you update to iOS 5 or higher.  You will have to back up your iPod on your computer using iTunes.  Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline.  Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library.  Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
    When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings.  Allow your iPod to update, and leave it connected to your computer.  At the end, it will restart and give you the option to restore to the iTunes backup you made earlier.  Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
    This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

  • HT1937 I am not able to make a call from my phone.

    Sir,
    this is a very peculiar kind of problem I am facing and it has made my life terrible because not even your service providers are able to help me. I bought my phone from (Maharashtra-Mumbai, India) and my network operator is (airtel). My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call from my phone. Everything else works just fine but cannot make an outgoing call. I have tried multiple sim cards of multiple network thinking that i might be a network issue but the problem prevails in all the network. I do not know where to go and what to do. I have an iphone5 and have been an iphone user since last 4 years but not i feel i need to change my brand as no on e is able to help me. I am told to pay (Rs. 19000) if I want a replacement but i am also told that they do not guarantee me if the problem would not prevail in that. I thought able believes in customer relationship management but it seems to be a fallacy. I can name like 10 consumers who use apple product because of my reccomendation and not I myself have no trust in the kind of customer service being provided by your company. Please help me to solve this problem. I presently stay in (Assam-tinsuki, India) and there is no aplle stor or any kind of support out here from your side, I had gone all the way to mumbai thinkng they might help but had found no support. please look into the matter soon and provide me with a handset that works all fine.
    Thanking you
    Ankur Kejriwal
    <Personal Information Edited by Host> .

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

Maybe you are looking for

  • Mail immediately crashes everytime I open it

    Hey everyone, I have a problem with Mail. Basically, every time I open it it crashes and closes within a couple of seconds. I've repaired disk permissions, no change, removed everything related to mail and reinstalled it, no change. Any ideas?

  • How can I set up a database program for inputing baseball team statistics that is compatible with numbers?

    I have been asked to be a statistician bar and athletic team. We are playing Dartball, a game of darts that is based on baseball.  The previous status station used Apple works which included a database manager that was compatible with numbers. I have

  • Can't get Rescue and Recovery to Start

    Hey all, My computer is having hardware problems. I'm at the point of giving up completely on the computer, but I had a few files that I wanted to recover from it first. I've had Hard Drive issues before and usually just have to push the blue Thinkva

  • Capital One Approved - Verification

    This is probably more of a rant than anything else, but might be useful to others. On Wednesday, July 8th, we applied for my wife's first credit card.  She is a green card holder, her social is over a year old.  Chase had denied her, but Capital One

  • Assign Search Help to Table

    Hi All,   I have created a custom check table which also has a text tables assigned to it. I have created a Elementary Search help for the check table and the selection method for the search help is the check table itself.   The issue is when I goto