HT4489 Unable to import vCard This vCard cannot be imported because it contains invalid contact data

Unable to import vCard This vCard cannot be imported because it contains invalid contact data

Did you export the vCard from Windows (e.g., Outlook)?

Similar Messages

HT4489 "Invalid contact data" error BB to iOS7 import. Suggestions? Thank you.

Hello, thanks for taking a look at this. I am attempting to import my contacts from my Blackberry 9670 running version 6 to my iPhone 5s running iOS 7.0.3, and I get the following error: "Unable to import vCard. This vCard cannot be imported because it contains invalid contact data." I am backing up only contact information from my Blackberry, and there are only 1100 contacts, well under the limits. Your suggestions would be appreciated. Thank you.

See the attached step-by-step, very specific, detailed instruction, just as you've asked.
http://www.blackberry.com/btsc/KB17022
At Step 6, you will chose "One Way Sync FROM Device"
You follow the remainder of the steps as outlined.
After completed, you will return to your Sync setup as in Step 6 again and set that to Two Way Sync.
Set the conflict settings as you prefer:
Open BlackBerry Desktop Manager, and click on Synchronize.
Select Configure PIM.
Select the application whose settings you wish to change (for example, the Address Book application).
Select the Configure tab.
Select Advanced Settings.
Select Confilct Resolution, and select the option Handheld Wins, or which you desire to be.
I choose Let me decide because I too, like you, enter data on both the handheld and in Outlook and want to be able to tell the sync which data is correct according to my desires.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This workflow cannot be imported because it was created in SharePoint Designer for a different Site

Hello everyone. I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
"This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
drawing."
So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production. I've put quite a bit of time into one
particularly and would like to export/import rather than re-created from scratch.
I've successfully created the form template and imported. This created the necessary list items nicely and the form appears to work as expected. However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
error. If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
is lost. I need to be able to overwrite/merge the existing workflow with the import. Any suggestions?
One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
light on the subject. Thank you.
Adam Tyler

Hi Adam,
Here is a blog talk about the same issue would be helpful:
http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
Best Regards
Dennis Guo
TechNet Community Support

I am unable to sync with my computer, I get a message ; This iphone cannot be used because the Apple Mobile Device service is not started.e

I am all of a sudden unable to sync my iphone with my computer. I get the following error message: This iphone cannot be used because The Apple Mobile Device service is not started.

my iphone with my computer
Windows?
Instructions here > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Trying to setup my iPad - get message "This iPad cannot be used because Apple Mobile Device service is not started." What does this mean? I am unable to get any connection at all..

I'm trying to setup my new iPad2 - get message "This iPad cannot be used because Apple Mobile Device service is not started". What does this mean? I can't get anything up on my iPad. Frustrated!

Assuming that you are on a PC then there are intructions here for starting it http://support.apple.com/kb/TS1567 , and for a Mac http://support.apple.com/kb/HT1747

Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. 4.3 os ive tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway?

Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
Leigh

Hi Demo,
Yes, I have not made myself clear, I apologise.
I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
The iPad is first generation
OS 5.1.1 Software up to date.
Thank you in advance for your time

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

Spread Sheet Couldn't be Imported, Spread Sheet couldn't be opened because it contains cells outside the boundaries of numbers. Has any one had this problem? It is an excel file that works fine on my mac.

When I try to import an excell file to numbers on my ipad i get an error message that says it cannot import the file or open the file because it contains cells outside the boundry of numbers. Any one have this problem. it is only one file that i have this problem with and it is an important one. I have no problem working on it with my mac and my excell for mac.

Number is limited to about 65000 cells so if your Excell spreadsheet is too large Numbers will choke. This is definitely one of the weaknesses. If you don't have Excel you can use LibreOffice which is free.

TS1538 this iphone cannot be used because the apple mobile device is not started

unable to access itunes in my pc and the below error prompts in my pc & iam using windows xp
this iphone cannot be used because the apple mobile device is not started

Hi...
Help here > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Have a 3rd gen nano, when I plug in I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

Click here and follow the instructions.
(27971)

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

Sync problem, iTunes says: "This iPhone cannot be used because the Apple Mobile Device service is not started."

Trying to sync my phone to update because it wont let me update apps on the phone itself. When I plug in to iTunes I'm getting a message saying "This iPhone cannot be used because the Apple Mobile Device service is not started." How do I fix this?

iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

Try Here > AMDS > http://support.apple.com/kb/TS1567

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

What do i do when i plug in my i phone and it says "this iphone cannot be used because the Apple Mobile Device service is not started"

i just bought a new iphone 4S and i had an ipod touch and when i went to sync my iphone to my itunes by plugging it in that message pops up how this phone cannot be used because the apple iphone device is not yet activated.
what do i do to activate it? do i have to add the device or what?
thanks

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT4489 Unable to import vCard This vCard cannot be imported because it contains invalid contact data

Similar Messages

Maybe you are looking for