HT4507 brother printer model MFC 7360N will not connect to iMac 10.9  I get a message check connection

brother printer model MFC 7360 N
I cannot scan a letter  to send  an e- mail,  or image , the message is check connection.
I can send a fax, , I can make make a photo copy ,
I can make a print from my docments.
when I try to scan from the printer to the computer it doesnt work. A message says "check connection"
Something is not set up correct?
Help?

Hi jean289,
If you are having issues with the scanner connection to your printer, you may find the following article helpful:
Mac Basics: Using a scanner
http://support.apple.com/kb/ht4505
Regards,
- Brenden

Similar Messages

  • I have a Mac Mook pro 13 inch with OS 10.7.5.. I have difficulte connecting Brother Printer model MFC-J825DW

    I have a difficulty connecting with Brother printer model# MFC-J825DW

    At first my iPad and MacBook Pro could print to the Brother MFC-J825DW printer.  Now it can't even see them.  I can manually add that printer using an IP address to the MacBook Pro.  But not the iPad.

  • HT203180 I purchased a video from iTunes but it will not sync to my iPod.  I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod."  I tried to use the "create an iPod version" but the command is graye

    I purchased a video from iTunes but it will not sync to my iPod.  I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod."  I tried to use the "create an iPod version" but the command is grayed out

    I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
    tt2

  • Can`t install my brother printer model mfc-j5910, the printer will not apear in the menu and I did more than twice an update. please help

    Hi there,
    try to reinstall my Brother Printer after the Maverics update, but it seems it is not longer possible. I loaded tons of software from Brother and Apple support and run the installatin, but the printer will not apear in the printer menu.
    Before the update the printer worked fine via WLan and yes both are in the same network. With my second Notebook it works just as fine, can`t figure out what is wrong.
    I need my printer for daily work, please help me out
    best regards

    Try resetting the printing system:
    http://support.apple.com/kb/PH14141

  • I have a HP2101nw wireless print server and it will not connect to my router.

    The status of my wireless print server always says it is not connected and idle on both my laptops.  I have tried to connect through the advanced settings but it does not find my router.  I have tried to connect manually but it fails.  Could a firewall be blocking it?  My router works fine on the internet for both laptops.  Any ideas?

    If other wireless devices are connecting OK, you know that the AirPort Express is operating correctly since all devices are receiving the same wireless signal from the Express.
    It's possible, but extremely unlikely that there will be other Samsung phone users on an Apple support forum, so I would suggest that you check with Samsung support to reset the Samsung phone back to default wireless settings so you can set up a new connection again.

  • Icloud beta will not open my keynote files. I get a message saying 'something went wrong'

    Icloud beta has stopped opening my keynote presentations. I get a message saying 'something went wrong' This has been going on for two days now. Is anyone else getting the same problem?

    Having the same problem, but its with pages not working via icloud.com using a web browser. Unable to open a previously stored document, or even open up create a new document.
    I contacted icloud support  and they had to send me to second level. Second level couldn't figure it out, and thought it was because I was using a pc - That can not be the problem, because It doesn't work on two different pc computers (different windows systems)  And My business account is the one where I can't open or create documents via icloud.com - but I can from my ios device.  But my personal icloud.com works just fine on either machine.  Second level is sending the ticket up to engineering and may be 3 days before I hear an update.

  • Airport Express/Mac work fine, Vista PC sees network, but will not connect

    I have been working on this for two days. What can I do? I have the latest firmware on the airport express and my utilities are up to date on both PC and Vista (airport s/w ver 5.3.2). It all worked before. Also, my brother wireless printer sees network, but will not connect.

    I have a similar issue. I have an AP Express set up for WPA2 Personal, G only. My Mac mini connects fine. My Dell mini9 with XP connects fine. My Dell desktop with Vista64 connects fine, but is local only, no internet.
    I have completely reset the AP to factory settings and reconfigured it using the Vista machine, but still no luck. What is going on? Anyone?

  • I have a RCA media streamer that will not connect to my network with a new airport extreme.

    I have a RCA media streamer (Model # DSB872WR)  that will not connect to my network with a new airport extreme.I had to create a new network and  my computers are connected but media streamer will not. Can anyone help? Thank you

    Hi, papineaubill!
    Welcome to The Canon Forums, and thank you for your inquiry!
    We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.  If you live outside the United States, please click here and select your country or region for your support needs.
    Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
    Thanks for choosing Canon!

  • TS4268 I did it all ... but my iPad will not connect to FaceTime ... What's next ???

    I did it all ... but my iPad will not connect to FaceTime ... What's next ???

    I'm sorry I wasn't clear... I have new iPad but when I'm trying to activate the FaceTime with my Apple ID it will not let me do it ( I'm getting the message "an error occurred during activation. Try again" )
    I went through all the troubleshooting but it still doesn't work. I will mention my FaceTime on my phone works fine and the same was with my old iPad
    Thanks for your help :)

  • I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    Isaaura - what printer model do you use?
    While opening Safari click the Bookmarks icon and select Bonjour.. can you see the printer listed there?
    (If Bonjour is not listed click Safari > Preferences > Bookmarks and check Bonjour within the Collections section)
    Can you access the printer by typing its IP from Safari?
    If the printer not available only thoguh Bonjour but an be reached by its IP, what router brand and model are you using?
    Templeton Peck - correct me if I'm wrong, the different OS X forums have a dedicated forum for printing and scanning.. as Apple no longer produce printers about the last 2 decades I would assume those forums meant to deal with other manufactures over OS X..
    john galt - Am I spelling OS X correctly?

  • Ipad will not connect to bluetooth printer

    My Ipad will not connect to my network printer or via bluetooth

    iPad bluetooth does not work with printers - it only is configured for keyboards, audio (headset/speakers), and tethering to an iPhone.
    The only printers that you can print directly to are those that have Airprint enabled - at this point a narrow range of HP models. If your printer is not on that list, there are some work-arounds as well as printing apps that go through your computer to the printer.

  • My hp c4599 printer will not connect to my wireless network

    My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened. 
    So can someone please help and please dont be too technical

    Hi ..
    Try these support articles  ..
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Mac Basics: Printing in OS X

  • Macbook will not connect to printer via the network

    I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
    I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
    "The "Canon..." printer could not be found in your list of printers" (altho it is listed)
    "Unable to get printer status (forbidden)"
    "Status: In use, Default" (altho the printer is ready and not in use)
    "Operation could not be completed -client-error-not-possible"
    Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
    The network works well supporting Macbook and several Tivos.
    Any help on what I should try next?
    Thanks for any suggestions
    John

    Hello John,
    For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
    For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
    So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
    If the printing still fails with the printed added as above, then please reply.
    PaHu

  • I am using a Canon 640 printer and my MPNavigator will not remain open.  It pops open then quickly closes.  I've used it for several years but it just started doing this.  What can I do to fix this problem?

    I am using a Canon 640 printer and my MPNavigator will not remain open.  It pops open then quickly closes.  I've used it for several years but it just started doing this.  What can I do to fix this problem?

    I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
    In my case, the MP Navigator app in the dock was linking to the wrong file.
    It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
    After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon).

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

Maybe you are looking for

  • Short dump in SAP R/3: SQL statement buffer overflow?

    Hello, I hope someone can help us with the following problem: A short dump in SAP R/3 (DBIF_RSQL_INVALID_RSQL, CX_SY_OPEN_SQL_DB) occurred during a delta load, which worked fine for several month. The custom code crashes at a FETCH NEXT CURSOR statem

  • Question about Intel ProSet WLan software removing

    Trying to update my G30 I ran in to the TOSHIBA - Wireless LAN Driver Portal. When I try to follow the instructions it's clear that I have to remove a small program called Intel PROSet. But when I look for Intel Pro Set Wireless software in the remov

  • Toad 9 errors out

    I'm getting the below error in TOAD while executing the script, SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY('PLAN_TABLE','TSH','ALL')); An uncaught error happened in fetching the records : ORA-01591: lock held by in-doubt distributed transaction 43.38.864

  • Internal System Error prevents access to https pages of HP Deskjet 3052A

    OK, sorry, try this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en

  • USER EXIT FOR SAPMV45A

    hi all, id like to ask if you have any known user exit that could answer my problem i have a routine here that updates message control upon changing of the field werks in the line item. however, there are instances when output message is not updated.