HT4515 How to add a ring when you receive text messages

I just purchased I Phone 5 and when I rec a text message I do not hear a ring-On my Iphone 4S no problem what am I doing wrong. Thank you

I had the settings correct..however all of a sudden my phone stopped texting...just now I remember when I was at the ATT office they were working on another phone (setting it up) and they turned it off then on again and it worked..so I just tried this _and now I have sound on the text messages...
Thank you for your help!

Similar Messages

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • How might one go about forwarding a received text message?

    How might one go about forwarding a received text message?

    Long-press the message and you should get a pop-up with various choices, including Forward the message.

  • TS4268 Can any one tell me how my husband and I can stop receiving text messages sent to him on my phone?

    Can any one tell me how my husband and I can stop receiving text messages sent to him on my phone? His text messages to me are showing up under my number, like he is me?

    Go to settings, messages, send and recieve, scroll to where it says start new conversation from, and make sure you each have a different email address checked instead of the same email address.

  • Can you receive text messages from a blocked or private number on iPhone 4

    Can you receive text messages from a blocked or private number on iPhone 4?

    So listen to them.
    Disable iMessage. reset network settings. Enable iMessage again.

  • How do I stop my macbook from receiving text messages from my iPhone?

    After I updated my macbook to Yosemite, I started receiving text messages on it from my iPhone.  I want to turn this off, how do I do this?

    Hi,
    Temporary.
    You could Disable the account on the Mac.
    You can untick the Receive At option for the iPhone Number as "Alias".
    This will cut the number rather stop them completely.
    More permanent.
    Sign Out button on the Mac version.
    Messages will work but the iMessage account will not have an ID to log in with (it will show but will need the password. you change the ID but entering a new one.
    Permanent.
    Remove the Apple ID for the Settings for the iPhone version.
    iOS 8.1 and Yosemite will also allow or can be set up for Text Forwarding as it is called in the settings on the iPhone.
    Effectively the two become paired  (needs a code number that appears on one to be entered on the other device) rather than just "happening".
    This does allow SMS Messages to also be synced between the two.
    I am not sure you are talking about this though.
    If we have missed what you are after you will have to give more details.
    9:22 pm      Thursday; November 6, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • When I receive text messages, it displays phone number instead of contact name.

    I updated to iOS 5 on my iPhone 4 over the weekend. Since updating to iOS 5, all of my text messages show up with a phone number listed instead of the contacts name. I checked my contact info and all the contact information is listed and the numbers under the contact are correct. Has anyone else had this issue and if so have you discovered any resolutions?

    Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    Ps. PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • I am not getting sound notifications when I receive text messages anymore.  A few will come through, but I have the volume on high and I will look down and see I have missed messages even though the phone is in my pocket or purse.  Is this common?

    Lately I have noticed that I am not receiving sound alerts when I receive an imessage or text.  This is intermittent, as it does not occur ALL the time, just frequently enough to be annoying.  Anyone else having this problem?  I just updated the IOS, but my friend says hers does the same, before and after the updat.

    Lately I have noticed that I am not receiving sound alerts when I receive an imessage or text.  This is intermittent, as it does not occur ALL the time, just frequently enough to be annoying.  Anyone else having this problem?  I just updated the IOS, but my friend says hers does the same, before and after the updat.

  • How to add multiple table when creating add on using b1de

    Hi all,
    Plz help me
    How to add multiple table when creating add on using b1de.
    Thanks

    Hi dns_sap,
    Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
    If so, you can use the following code
    Add User Table
            Try
                Dim lRetCode As Long
                Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUDT.TableName = TableName
                oUDT.TableDescription = TableDescription
                oUDT.TableType = TableType
                lRetCode = oUDT.Add
                '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
                oUDT = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Add User Field
    Try
                Dim lRetCode As Long
                Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
                oUDF.TableName = TableName
                oUDF.Name = FieldName
                oUDF.Description = FieldDescription
                oUDF.Type = FieldType
                lRetCode = oUDF.Add
                '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
                oUDF = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Regards,
    Vítor Vieira

  • I have two different accounts on my iMac 2011 OSX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

    I have two different accounts on my iMac 2011 OCX 10.8.2. When you type text in one account, he dialed in the second account at a time. how to solve it?

    I have 2 users on the imac. when entering text in the first account it is duplicated in the second

  • Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one.  Thank you.

    iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
    Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
    But no, I'm not aware of any problems that not having it associated causes.

  • How do you get your iMessages to say iMessage when you get a message on the updated iO6?

    My iMessages are on but before I updated it when I received a message it would say iMessage instead of the actually message. Now that I updated it it doesn't how do I turn that back on. I don't want people to read my messages! It's the newest iPod too.

    How are you dialing these calls?

  • How to add an issue if you are a responsible manager of a child wbs ?

    How to add an issue if you are a responsible manager of a child wbs ? I have some projects with lots of child WBS and these child WBS is managed by others project managers (or others responsible managers), different responsible manager from the project. I'd like the others responsible managers could add/edit/delete issues in their WBS's. How to do that ?

    Hi Yves
    try to type at the end of your query the following
    select cardcode,cardname,balance from ocrd
    for browse
    and execute it again
    Edited by: Fasolis Vasilios on Nov 30, 2011 12:10 PM

  • I cannot see my Iphone 4 in my device window in the finder anymore.  It use to appear so I could copy the camera pictures off of it and transfer them to other folders.  Does anyone have and idea how to get it back when you plug it in initially.  Thanks

    I cannot see my Iphone 4 in my device window in the finder anymore.  It use to appear so I could copy the camera pictures off of it and transfer them to other folders.  Does anyone have and idea how to get it back when you plug it in initially.  Thanks

    You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
    Best of luck.

Maybe you are looking for

  • Writing and including our own customer data source to Crystal Report Design

    Hi, I need to create a Crystal Report based on a locally stored XML and schema. I can do this but the issue Iu2019m facing is that some tags used in the schema and the format is not supported by Crystal. So my plan is to write a database driver which

  • Why is the advance song forward button backwards?

    This isn't really a big deal, but it has persisted long enough to be a catalyst for me to post in this forum. I frequently use iTunes 11 in its minimized state in the task bar of my Windows 7 operating system. For some reason, when I go to advance a

  • Deleting Personnel Number in Production

    Hello Experts, I have come across an issue where some of our business users have deleted personnel numbers in Prod though PU00 after 30 days of employee being hired. I would like to know the best practice in terms of deleting a personnel number when

  • HELP - FCPX does not read my external drive.

    The drive shows when first launching FCPX, but then the drive disappears from event and project lists when fully launched. I copied an empty Events (with new event) and Projects folders from my hard drive to the root of the media drive - the new even

  • Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

    I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message: "Windows8VM" failed to start. Failed to st