HT4522 Sounds fine but how do I add partitions in air port utility

Sounds fine but how do I add partitions in air port utility

It is possible to partition the drive, but you have to physically pull the hard drive from the Time Capsule and place it in a separate enclosure for the formatting operation, then reinstall the drive again back in the Time Capsule.
Unfortunately, in addition to a lot of work, this will void the warranty on the Time Capsule.
It is possible to create one or more disk images on the Time Capsule using Disk Utility.
While a disk image is not technically a "partition" in the normal sense, it will allow you to specify and reserve a given amount of space on the drive for the image or images that you create.

Similar Messages

  • How to turn on encryption in air port utility

    how to turn on encrytion in air port utility for air port extreme.the instruction say to go to airport utility to turn it on but I can't see how.

    To enable wireless encryption using version 6.x of the AirPort Utility, just do the following: 
    AirPort Utility > Select the base station > Edit > Wireless tab > Wireless Security > Select the security type; I would recommend WPA2 Personal, and then, enter the desired password in both the Wireless Password & Verify Password boxes.

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • Audio on video files sounds fine but actual video won't play

    Just bought a new laptop last week w/ windows vista on it, downloaded itunes and purchased a legitimate (i.e. direct from NBC) tv show - the audio sounds fine, but the video locks up on the first frame when I go to play it. I can fast forward to any spot in the show, but the video keeps freezing wherever I choose to play it. have tried numerous solutions found on the website, gone to my local apple store and emailed apple support and nothing has solved the problem yet....I even upgraded the computer's memory a few days ago thinking that might be the issue and it wasn't. anybody have any advice?
    thank you!!!

    Doublechecking a few things before proceeding.
    In your troubleshooting efforts so far, have you worked through the suggestions from the following document?
    Troubleshooting iTunes for Windows Vista video playback performance issues
    Do you have a 32-bit or 64-bit version of Vista on your Compaq?

  • I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear

    I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear, they have a skipping sound to them.  I have erased teh CD-RW and tried again and it was somewhat better but the last few songs did the same thing.

    Jennann,
    First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
    The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
    The burn speed is selected in the dialog box that comes up when you request the burn.  It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

  • How does one add a device to ColorSync Utility

    I was wondering how one can add a "device" to ColorSync Utility? It seems all my "other" devices are showing up, such as my printer (which also has scanning capabilities).  However, I'm not seeing my i800 Microtek Scanner, "renamed" as ScanPotter anywhere, yet IS in my "Utilities" folder, and no doubt this could be the reason why everytime I scan a photo from a print, negative or slide I'm getting annoying "pop-ups" to install Xll Quartz, which IS already installed.  Also I plan to install the new PhotoElements 11...am I going to have a problem with that as well

    Maybe it needs to be in Applications?

  • HT3546 How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.

    How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.

    In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
    The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices.

  • How can i install the air port utility on macbook air?

    How can i install the air port utility on macbook air

    Instructions and setup guide are here:
    http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

  • FCP through to External monitor....Sound fine but video is still frames

    Hi everybody
    In January of this year this problem was posted by Andy D.....
    +No matter what combination of settings I choose I cannot get video to play on my HD monitor only a still of the last frame shows up. When I hit play the audio is loud and clear and then when I hit stop the final frame appears on the screen.+
    I have this problem but only when the material in my FCP viewer, canvas or sequence is ProRes422 (I'd converted H264s to this before importing into project)! If the project is DV or H264 material that has been rendered by FCP, it plays on the external monitor fine but it seems if we start looking at the high end stuff like ProRes, back to sound but still picture.
    I might add here that the path to my external Full HD monitor is through firewire to an ADVC100 converter and then composite cables to the input of the monitor. By the way the same thing happens with an SD monitor.
    I haven't tried using my video camera as the link through to the monitor instead of the ADVC100. Would this make a difference? I'd be pretty happy if someone had a solution for this.
    Thanks in anticipation.
    Peter L

    Unless the camera is a DVCPRO HD camera...like the HPX-170...this won't work. Not via HDV or AVCHD. Playout isn't as simple as it was with DV. There are far cheaper capture cards...Decklink Intensity Pro, Matrox MXO2 mini...but you need a MacPro for those (or with the MXO2 MIni, a laptop with an Express34 slot). An iMac is severely limited in what it can do.
    Sorry.
    #25 HDV external Monitor Viewing
    Shane's Stock Answer #25 - HDV external Monitor Viewing
    To view HDV on an external monitor in high definition you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
    The real reason why you can't monitor HDV through a Firewire camera is because Firewire HDV cameras don't decode incoming HDV streams and route them to their outputs like DV cameras do.
    Good options for you are the Matrox MXO2 mini...$450...coupled with an HDTV. Or a Matrox MXO (DVI connection) coupled with an Apple 23" display gets you good quality.
    And there are the Decklink Intensity and Intensity PRO cards as well, and the AJA I/O Express...
    You can, however, view HDV out via firewire as DV...lowering the resolution to that of DV, but still viewable. This is not full quality nor should it be used to judge the quality of your footage or used to color correct to. This is just a way to view the footage on a large monitor.
    Here are some examples of some of the possibilities:
    - DV or HDV sequence output to an SDI signal on a third-party interface
    - An uncompressed NTSC or PAL sequence output to a DV FireWire output
    - An HDV sequence output to a DV FireWire output
    Sequence and output formats must have compatible frame rates. For example,
    sequences with a frame rate of 60, 30, or 24 fps can be output to a 30 fps device,
    but not to a 25 or 50 fps device.
    Shane

  • I got birthdays in my ical on mac and iPhone 4 but how can i add anniversaries

    I got a mac pro and have updated to mountain lion, i use the mac cal to synchronize to mac cal on iphone 4s and vise versa, I got birthdays on my cal but would like to add anniversaries to it as well how do i add them so i dont forget important dates and also in my icloud i have 3 colours for different entries e.g. green for holiday , blue for home and green for work, so how do i add another colour for something else for a different entries called "events" and add anniversaries like birthdays. Ta Juss p.s i also have a problem with birthdays they all duplicated.....

    Go to "File" and create a new calendar, name it "Events" or whatever you like and pick a color.  Then, go to the date you want the anniversary on and create an all-day event naming it however you like.  Under repeat, choose to have it repeat every year and select never for when it should end.  You will now have a calendar of anniversaries and other events.  Just make sure to select repeat every year and never end on each item you want in that calendar.

  • Using compressor, sound fine, but video is stuck

    When i render a project 75 % of time, sound is fine but the video seems stuck. It just show one frame and flickrs like crazy.
    I can try 2-3 times and suddenly it works.
    But each rendering takes 8-10 hours, so it's a huge problem for me.
    I am using the newest Mac Air with 4 gb ram.

    When i render a project 75 % of time, sound is fine but the video seems stuck. It just show one frame and flickrs like crazy.
    I can try 2-3 times and suddenly it works.
    But each rendering takes 8-10 hours, so it's a huge problem for me.
    I am using the newest Mac Air with 4 gb ram.

  • Popup image works fine but how to control the window size

    Hello folks,
    I use
    <img title="Click to pop up large image" src="#OWNER#.view_my_file_form?p_file=#IMGID#" width="40" height="30" />
    to popup a image window. It works just fine. How can I set the popup image window size? The window is too big but the image is too samll.
    Many thanks.
    Mickey

    The popupURL function is defined as
    function popupURL(url)
    w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
    if (w.opener == null) w.opener = self;
    w.focus();
    If 800x600 is too big for you, write your own mypopupURL function with whatever size you want

  • How do I add my macbook air to icloud

    I have a new macbook air, the last one was stolen, how do I add this one to icloud so i can track it?

    On the Apple Menu (top left of screen), System Preferences then iCloud. Sign in to iCloud and then insure that "Find My Mac" is checked on the right hand side of that System Preference window.

  • How do I add a fourth USB port to my iMac?

    I want to be able to use four, USB game controllers on my iMac. I have only three USB ports. How do I add a fourth port?
    thanks!

    There's an extra port on Apple USB keyboards. For something like a game controller, that should work for one of them. If you remove the mouse while gaming, or get a wireless Bluetooth mouse, then there are two USB ports on the keyboard. If the remaining ports are not enough, then you'll have to get a USB hub. You should get one that has it's own power supply, rather than a cheaper one that is powered only by the connection to the Mac.

Maybe you are looking for