HT4527 After I transfered my music from my old PC to my MacBook Pro using an external hard drive, all of my songs appear with an exclamation mark next to them saying the song could not be used because the original file could not be found. Help?

These are all the songs that I have purchased. I'm panicing! I feel like I did everything right with the transfer but maybe not. I need help!

Read this post and do the migration again, putting the library in a portable shape first if necessary.
tt2

Similar Messages

  • How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
    or, you can read the link below on how to do it in dos mode.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
    once you've formatted it - you can now use it in both your macbook and windows computer.

  • Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

    Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

    This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
    I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

  • I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

    I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?    I need to know what to highligh, what to click on. 

    hirogliffix,
    take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

  • HT1386 I copied my my iTunes music from an old computer to a Macbook Pro, but it did not copy the playlists on my nano. How can I transfer the playlists and their content from the nano to the Macbook

    I copied my iTunes music from an old computer to a new Macbook pro but it did not copy the playlists that are on my Nano. How can I copy the playlists and their content on the nano to the Macbook? If I automatically sync the nano from the Macbook, will it scrub the content and existing playlists on the nano?

    You need a third-party program like one of those discussed here:
    https://discussions.apple.com/message/2901170#2901170

  • I can not transfer files and data from macbook pro to my external hard drive, i can not transfer files and data from macbook pro to my external hard drive , so what should i do ?

    i have an external hard disk but whenever i tried to transfer any file or data from macbook to this ext.disk its failed before that i used to have another hard drive with same problem ,then i thought may  be this hard drive is not support mac then i bought a new one which supports mac but still i have same problem what should i do ?

    Ok.
    Go into Disk Utility, and make sure you select your external hard drive.
    There should be 4 tabs, one being erase. I have taken a screenshot to show you what it should be set to (obviously name it what you like), and set the format to Mac OSX Extended (Journaled) as per the example below & after double checking your in the right drive, you can hit erase. And you're done! *hopefully*

  • I have all of my data from my old macbook pro in an external hard drive. Basically it's my old Macbook hard drive with external casing. It was working fine before when retrieving files using my new macbook air, now I can't access any files?

    I can't access any of my files, photos, anything form my external hard drive... It worked before now when I plug it in the light comes on, but it doesn't even show up as an external drive, so I can't access anything, I'm worried I have lost everything...

    Huge mistake was only having ONE copy of your data OFF computer,
    most people do it, and its just horrible and the typical reason for serious data loss.
    Likely you have a very common failure (extremely common actually) called SATA bridge card failure, which would be "good" news,
    read about same here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    Never again let yourself have LESS than 2 copies of your important data off-computer,      ever
    1. verify the external HD doesnt show up on another Mac
    if same, you have about a 8 in 10 chance its SATA card failure.......... easy to fix.
    The great news at the end of the tunnel of an apparently failed or failing external hard drive.
    When checked on another computer, and with no need for spending money on data extraction expertise or software, the very likely case is that your external USB or thunderbolt HD is in fact fine, and merely the card interface, or SATA bridge card has failed or is failing.  Keeping a HD dock around handy, or cheaper still a $20 hard drive enclosure or a SATA to USB connector can be a real life saver in getting your drive back to use, when the drive itself is fine, and merely its interface card has gone bad.
    The SATA bridge card inside a USB external HD has a very high failure rate in general
    Typical SATA bridge cards as seen inside a 3.5" external HD with power input (#1), and 2.5" SATA cards (#3, #4, #5)
    What are the realistic odds your HD is perfectly fine?
    There are no hard facts whatsoever, especially since so many people discard their assumed “dead/faulty” hard drives, but a good educated conclusion from years of examining and seeing this issue is that for hard drives made since 2010, and not dropped or generally abused, is that a minimum of 50% conservatively are perfectly fine! I personally estimate however that it likely approaches 60%+.
    Considering how many external hard drives ‘fail’ (rather the SATA bridge more than half the time) each day, that is a very high number of perfectly fine HD that are tossed!
    This is especially common with 3.5” desktop HD that are connected 24/7 with power and see a lot of data transfer. People wrongly conclude that “X” mfg. just made a defective drive, when in fact their 3.5” drives inside the plastic enclosure is 100% fine.  I have personally seen well over 200 of these dead SATA cards and additionally seen 3 fail within a one hour span of doing a large data copies.
    One of the very reason pros use bare HD as inserted into HD docks is not just the saving of space and the need for endless USB cables, but the elimination of the need for this high failure-rate part.
    While the shapes and sizes vary somewhat on SATA bridge cards, they all serve the same purpose and have likewise failure rates
    What exactly is the SATA bridge card in your external HD?
    In the middle to late of 2009, most all external hard drives both in 2.5” and 3.5” reached the shelves in SATA III. These small SATA cards or "bridges" are used to translate between the hard drives’ interfaces and the enclosures' external ports (USB, Thunderbolt, Firewire). Additionally these small bridges not only transfer power but also of course the data. Unfortunately these SATA bridge cards have a very high failure rate as they are burdened with shuffle power and data.
    Literally these little unreliable and fragile cards are the power conduits and the nervous system for all external HD data transfer.
    SATA card as found inside a typical USB external hard drive
    The assumption that the hard drive is bad when its not!
    Countless 1000s of good external hard drives are thrown away each year because the owner thought the HD was bad when it fact it was the SATA bridge card which had failed. This card is removed in a matter of mere second once an external USB HD is cracked open from its plastic casing to reveal the bare HD and the attached SATA card which attaches between the HD and the USB cable.
    To complicate this problem, even many computer professionals do not know that there is a very easy solution to the “failing or dead HD” issue since the hard drive itself is very likely just fine.  Its astonishing that so many highly educated computer repair persons are unaware of this high-failure part, but this is mostly due to the fact that they do not juggle 100s of hard drives and know that of the iceberg that is a “external hard drive failure”, the mostly unseen majority are not a HD failure at all, but a bridge card failure.
    To add to this great misunderstanding is the fact that people assume that "likewise symptoms seen on an external HD are the same as seen on an internal HD, therefore also the external HD must be bad". This is a compositional fallacy of logic. Since internal HD do not have a SATA bridge interface, to conclude similar symptoms "indicate the same failure" is misplaced and incorrect.
    This is all not to say that HD do not fail, they do indeed, and I have seen many 100s of dead and failing hard drives.  Hard drives even under ideal conditions have a life expectancy of around 4-8 years due to ferromagnetic depolarization from entropy.  But of the mountain of symptoms that are seen as “hard drive failures” in comments, posts, and hearsay, half or more of these are not a HD failure at all.
    Once your rescued hard drive is removed from the bad SATA card
    You have several options, but the purchase of a $20 HD enclosure is one option, another is having a HD dock, however this eliminates the former portability in a 2.5" small HD.
    Remember that 3.5” HD require power, which means you need either a HD dock, or a powered SATA card kit as seen at top left in the picture below. 2.5” HD get power from the USB port itself.
    Just remember that the serious downside to the low cost external HD enclosures is THEY TOO contain these SATA cards, and what is worse the cheap ones will fail, often, much quicker than the original factory one did! In which case it is recommended you buy a quality HD USB enclosure
    Rescue tools to use with your extracted HD for data recovery

  • Why can't I add files from my MacBook Pro to my external hard drive?

    I re-named my external hard drive on my PC, and now I cannot add files from my Mac to the hard drive. How can I add files again? Do I need to reformat my hard drive?

    Since you mention you used the external harddrive with your 'PC', I assume that it was NTFS formatted. By default Mac cannot write to NTFS only read it.
    To make sure: go to. Disk Utility (while the drive is mounted), select the drive and look at 'Format'. That should tell you the format type of the drive.
    If you are looking for third party solutions, try:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    http://www.paragon-software.com/home/ntfs-mac/
    However, know that they are not supported by apple and won't be the best solution. The best cross platform solution would be to reformat the drive with exFat (you can do this through disk utility), just make sure you backup your data before doing this. Both Windows and Mac can write to exFat and it does not have file size limitations as Fat32.

  • How do I transfer everything from my 2006 macbook pro to an external hard drive?

    I am selling my Macbook Pro 2006 to upgrade.   I want to clear all info off my computer.  First, I want to move all info to an external hard drive.  Is this possible?  I recall that there is a way to move info form mac to mac by hitting alt A?  Would this work for tranfer to the external drive?

    No, here's what you want to do:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    This process will first erase the external drive. The result is a bootable backup on the external drive.

  • My entire iTunes library is deleted, all of my songs have the exclamation point next to them, and the original library file is gone, what can I do to get my music back?

    So while trying to make extra room on my hard drive, I accidently put my iTunes library in the trash, and emptied it, every song in my library can not be located, and I don't have Time Machine.

    Take a look at this link, https://discussions.apple.com/docs/DOC-3141

  • I transferred all my itunes music from my old pc to a new laptop using an external hard drive.  I can drag songs to out ipods, but when i try to add songs to my Iphone 4, I get the red circle with a line through it.  It will not allow me to transfer music

    I have transferred all of my itunes music for my old pc to a new laptop via an external hard drive.  All songs are sucessfullt loaded in itunes and I can drag songs to my husband's ipod without any problems.  However, when I try to drag songs to my iphone 4, it will not let me.  I get a red circle with a line through it. Why would it work from itunes to ipod but not to my iphone?  HELP!!!

    You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

  • HT1933 I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found.  I have used the gift card previously with no issue.  How do I fix

    I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found.  I have used the gift card previously with no issue.  How do I fix it?

    Have you moved or deleted those tracks on your computer (the gift card has got nothing to do with it) ?
    You might be able to re-download them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes (re-downloading isn't possible in all countries) - if those songs appear there then delete the entries from your iTunes library (where you are clicking on them to play them and gettinf the 'original file' error), and they should then get a cloud symbol against them for re-downloading.
    If they don't appear in that link then have you got them on, for example, an external drive ?

  • I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    Put the files back where iTunes expects them to be.

  • I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

    I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
    Thanks! 

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

Maybe you are looking for

  • How to bring status selection ID in RE Query ?

    Hello I have created a query on RE table and want to bring in the status selection ID in the selection screen. I used table join but do not know how to attach this status selection structure to my join. My current stautus of query is that the status

  • Using both CPU cores on Zynq?

    Hi, Has anyone tried to use both cpu cores of zynq? I did not find any example from Xilinx, only related information in "Zynq-7000 EPP Technical Reference Manual UG585 (v1.2)". It says that cpu0 must do these two things: 1. Write the address of the a

  • Brand New Nikon D3,D300,Canon 40D,5D mark 11

    DIGITAL CAMERA VILLAGE. is a certified wholesaler of various brands of mobile phones, video games,laptops and digital Cameras. Shipping world wide via FedEx 48hrs Shipment 2days delivery with all shipping confirmation details given. For more enquirie

  • Register my printer

    i cant register my printer as it wont take my postal code. it keeps asking for my zip i am in canada . now i have lost the form. No too computer literate

  • Problem with Offset of 0FISCPER

    Hi,      I have a query which accepts a from fiscal period and a to fiscal period. Three columns should be displayed, the first column should display a key figure for the selected range(for this I used teh range restriction) and second column should