HT4527 So my computers switched the 'old' and 'new' computers for the homesharing option.

Old computer is running Windows 7
New computer is running windows 8
Both are connected over the same cable modem.
I followed the instructions to the letter and it kept doing it.
HELP!!! I need my music on my laptop as I am going to be traveling alot.

I am not familiar with "transfer manager." Did you perhaps use the Migration Assistant? What operating system is installed on your new computer?
If you look in your hard drive, in the Users folder, do you see a folder with the name from your user on your old computer?
Best of luck.

Similar Messages

How to check old and new value for a text item attached to a lov?

Hi,
I am new to Forms.
I need your help in following.
I have a form which has a text item which is attached to a LOV. I want to track what changes are being done using that form. So i want to know what was old value and what is new value.
I can get the new value as it is there in form field. how can i know what was the old value.
Thanks
Prashant Pathak

This is wrong:
name_in(':' ||l_audit_block.field_name)
this is right and will get you the current value of the the item:
name_in('l_audit_block.field_name');
Assuming the name of you block is "l_audit_block" and the name of your item is "field_name".
Please note name_in() returns your current value for an item. In your case this may or may not be the "old" value. I define "old" value as the value it was when it was queried. If that is what you are looking for you need to use the get_item_property() call that Steve described above.
--pat

Fetching old and New Data in HRMS for 'Update' Transactions

Hi All,
I need to find out the old and new values for a person_id from HRMS tables (Per_all_people,Address,contacts etc) based on Person Id. Do we have any Standard Script or has someone prepared such script and can share with me. I am not expecting the Corrected records to be fetched as it overrides the same line but atleast for such records which comes under 'Update'.
For Example, If for Perso_id 123, the Telephone# was 8888 and then it is updated to 9999. So my query Should return somethign like:
Information From To Effective Date
Telephone 8888 9999 28-Nov-2011
Note: Can't use any triggers.
Thanks

Hi,
You need to include a new keyfigure in the cube and map with both the new and old compcodes and the write a field routine with the logic that meets your requirement by passing the values of PSPNR into the internal table and get the output for the keyfigure value. Also you use if else condition as per the requirement.
Hope this helps...
Rgs,
Ravikanth.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook have all of their old and new emails. My old emails have vanished from Apple Mail.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook in my company have all of their old and new emails. My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices. I do not have my mail backed up in time machine recently nor did I export my emailbox recently. Any ideas?

Try looking in your User folder.
Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

How to switch iphone 5 to new pc for backup and sync. lost drive on old pc.

How to switch iphone 5 to new pc for backup and sync without losing anythinng. Lost drive on old pc.

Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.
Connect iPhone.
Sync.

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
Thank You all in Advance

You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
Then setup Sync once again using that account and merge the content on the Sync server with your computer.
* Merge this device's data with my Sync data

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one. Is there a way I can do that?

I upgraded one of my programs and now the icons for both old and new appear on the launch pad. I don't need or want the old version to display, as it's been imported into the new one. I can't seem to figure out how to edit it off the launch pad.

Hi there,
More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
OS X Lion: Install, update, and uninstall apps
http://support.apple.com/kb/ph4524
To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
Hope that helps,
Griff W.

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
If anybody has an idea about SAP documents please help me
Thank you,
Regards,
Ramesh

First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

When I installed CC 2014, I ended up with the old and new applications.

When I installed CC 2014, I ended up with the old and new applications. When I uninstall the old one, it takes out the new one too. Suggestions?

Hi LeoOfMars,
This is an expected behavior. Please check : http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
If you dont want to use the older version you can uninstall them.
Regards,
Rave

TS1389 I am trying to authorize my new computer to download all old and new songs From my library

How do I authorize my new computer so I can download my old and new songs off my library

Authorization and Deauthorization
See iTunes Store- About authorization and deauthorization for Macs.
See How to Authorize or Deauthorize iTunes | PCWorld for Windows.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

T.code FF7A: how to see old and NEW open items?

Hi All,
I've filled the "Cash Managemeng Group" in the master data of a Customer.
The report Cash Manag.& Forecast doesn't update its old open line Items.
Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
Could anyone tell how to obtain all the items (old and new) in the report?
Thanks
Gandalf

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

I accidently created a new apple account on my new phone, How do I merge my old and new accounts

I had an old account but had lost access to the email. In frustration I created a new account to use with iTunes on windows. Now history repeats itself and I've a new iPhone 4 that I want to load with data from both old and new accounts. Do I need to just go to the Genius bar next time I'm in town or is there some way to log into each account, back up the data and merge to the new account?

Actually not trying to merge the accounts, but back up the DATA i have stored in those accounts. Once I've pulled the many songs I purchased under the old account I'll burn them to something and delete the old account... and I think I've just answered my own question.
i.e. Don't try to merge anything, just salvage music and other data (contacts, notes)

How to fetch old and new value from of a field(non-key) from LOGDATA

Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
Kuldeep

Hi,
May be this link is useful to you.
a®

HT4527 So my computers switched the 'old' and 'new' computers for the homesharing option.

Similar Messages

Maybe you are looking for