HT4528 CAN NOT SEE IPONE ON MY COMPUTER

can not see my iphone on my computer

Try plugging it into different USB ports. If you're plugging it into a keyboard or monitor, try plugging it directly into the box instead.
Try uninstalling and reinstalling iTunes.
Since other computers see it and yours doesn't then it's likely a driver issue with your computer. You  need to try the multiple plugs, etc, to trigger that driver installation on your computer.

Similar Messages

  • HT1498 I rented The Dark Night Resises and I can not see it on my computer Itunes already charged me for the rental ofthis movies. Please either credit my account or let me know how this matter can get resolved.

    I rented the Dark Night Raises yesterday December 22, 2012 It was charge on my Itune card, but I cant not see it on my computer please creidt me the cost of the rental or advise me on How we can resolve this matter.

    We are all itunes users just like you.  We can do nothing.
    What do you mean "I cant not see it on my computer"?
    You cannot fond the movie?  Where did you look?
    Did it download?  Have you tried Store>Check for Available downloads.
    The movie is there but it won't play?

  • HT4528 can not see my photos when i take a picture?

    Hi can anyone tell me after two attempts at restoring my phone to factory settings that it can't show my photos when i use the camera?

    Hello Breede,
    After reviewing your post, it sounds like you cannot receive MMS messages. I would recommend that you read this article, it may be able to help the issue.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I can not see my husbands Itunes library after he has shared his library

    My husband has shared his Itunes Library, but I can not see it on my computer. Any suggestions?

    So what sync settings do you currently have enabled from under the iPod's Summary and Music tabs?  Any error messages when you try to sync?
    To be sure, reset sync warnings. To do this, right->click the iPod under Devices and choose Reset Warnings. Then resync your iPod.
    B-rock

  • I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?

    Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
    or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung

  • I have an Imac and I use mostly "Firefox" and I am "not too" computer savvy and it seems that now I can not see images on Firefox at all. Therfore i can not see what I am clicking on (like "to buy" or "next" .. PLEASE help me! Thanks in advance!

    I am "not too computer savvy" so if you are going to answer my question.. Please take super baby steps (thx in advance).. Okay, now I have a 1 yr old Imac I am using 10.6.8 (do not know what that means) but everytime I call Apple support they ask me.. So I figured you may need to know as well. I really love Firefox (easier for me) and I was trying to download a coupon printing thing to print from Coupons.com (plz don't laugh..economy sux) anyways, the operator at coupons.com told me how to install it. Can't remember but if not immediately after or not long after?? It seems that ALL my images on EVERY website are gone. It is very frustrating because I can not see (for example on Ebay where to click "buy it now" or "continue" unless it seems I sometime get lucky and click where it says "image" but there isn't one. It looks like a set of shark teeth actually right beside the word "image" very jaggedy teeth, I guess?? So I have been using Safari. There is no problem with ANY of those website images. I go on the same basic sites so that is how I know that. I have only downloaded music I think 3x. I do not download much at all. I would really love to use Firefox, being the un-savvy computer person I am... Firefox is easier to navigate for me. Thanks SO much!

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • I downloaded A software to your computer. And I connected with my iPhone. Main page does not work. I can not see it. Iitnos Store does not cost me why?

    I downloaded A software to your computer. And I connected with my iPhone. Main pagedoes not work. I can not see it. Iitnos Store does not cost me why?

    Your posting makes no sense in the English language.  Please post in your native language.

  • Would like to move iPod touch files to my new Windows 8 computer -- but can not see hidden files

    Would like to move iPod touch files to my new Windows 8 computer -- read on how to do this, but this involves being able to see the hidden fiels -- but can not see hidden files...any suggestions. Would like to transfer these files from iPod Touch to new laptop without software -- is that possible -- if not can anyone recommend a good free software to use?

    There is no way to do so without software. I recently had a similiar task and was suggested to use iExplorer. It worked like a charm. 
    Refer to this page for iExplorer
    Here is the page I was helped with on this task for reference: Export Songs
    Hope this helps!
    PSkilton

  • HT4623 I just upgrade to the new system and I can not see or use itunes on my iPone 5 or iPad. How do I fix this?

    I Just upgrades to the new system and can not see or use itunes on my iPhone or iPad, please help?

    Easy,
    Restart your PC, then restart your iPhone/iPad. Then once your computer reboots, connect the devices using the USB cable.
    Let me know!
    C

  • My Computer is on BUT I can not see the screen to dark?

    My computer is on and I can the my front screen.  BUT it is too dark , so I can't see what to do.  I was having trouble and I had to reset the  PRAM.  Is this why I can not see the screen.  And how do I fix it?
    Jeanne

    I believe the keys on an imac are F11 and F12, for dark / bright respectively.
    Try that, I think it'll work.
    If not, then try out all the "F" keys, one of them will work.
    Ben

  • Although the Snow Leopard updated to 10.9.2 Maverisck, so I then installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

    Although the Snow Leopard updated to 10.9.2 Maverisck, so Ithen installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

    Sony has put in a position that the camera was connected with their software called PlayMemories Home . This then allows you to import movies and photos on the computer and then use them in different ways. However, when the camera is connected to the mac and I said Mass Storage USB Connected , then you execute this program I told you about two seconds later , however returns an error message that is: Connect the device to your computer or multimedia support . I do not understand .

  • TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

    i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Can not see my contacts in the "All" list

    Couple of days ago I signed into my skype and I was not able to see any of my contacts in the "All contacts" list. I was able to find the contants in the "Online contacts" list (and they see me in their "All contacts" list. When I open a chat window with any of my online contacts I get the same message: "Name Lastname is not in your contact list." When I click "Add to contacts" button it dissapears but when I close and open the chat window again it comes back, and the contact does not receive the request. I am able to communicate with all my contats, it is just that I can not see any of them in my "All contacts" list. I have tried completely unistalling Skype and then istalling it again but it didn't help, I am also using the latest version.
    Any help would be appriciated.
    Kind regards
    Solved!
    Go to Solution.
    Attachments:
    1.png ‏167 KB

    Sounds very simular to my experience starting yesterday.
    Windows version 7 pro.
    Skype version 7.4.64.102. 
    After a Windows update and reboot yesterday, I found my contact list is blank. I always keep the setting to show ALL contacts. After some quick investigations I have found:
    If I change this setting to show skype contacts, the screen is blank
    If I change this setting to show all contacts, the screen is blank
    I am still getting notifications someone came online, although I cannot see them in the contact list since it is blank.
    I can go to the recent contacts and the screen will populate
    I can change the contacts to only show online and the screen will populate. 
    Signing out and signing back in, doesn't change anything.
    Rebooting the computer doesn't change anything.
    Attachments:
    Capture.JPG ‏60 KB

  • Can not see the device net Master Interface in my project.

    Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

    Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
    Are you able to hold the C key down when you reboot, to boot off the installation disk?

  • Can not see the songs in the ipod

    when i load the songs in my computer i see all the songs in the ipod but if i want to see them in another computer can not see any of them...is there any option i'm missing???
    thank you!!!

    The problem I have is that my cd burner at home is broken. I would like to burn a cd on my mac at work (pc at home) from songs downloaded on the shuffle. Any advice on how to do such a thing?

Maybe you are looking for

  • HP photosmart 109a printer - Not printing black ink

    Hi. I am having problems with my HP photosmart 109a printer. It is printing in the other 3 colours but is not printing from the black cartridge. I have tried replacing the black cartridge twice now with 2 brand new cartridges. I have also tried clean

  • [solved] Conky - display GPU freq?

    I want to get conky to display a "Current Clocks (core)" value of this command: $ aticonfig --od-getclocks Default Adapter - ATI Mobility Radeon HD 3650 Core (MHz) Memory (MHz) Current Clocks : 110 405 Current Peak : 600 700 Configurable Peak Range :

  • Adobe RGB and Prophoto RGB interventions

    I want to apply the same tonal intervention on two copy of the same image, the first in Prophoro RGB and the second converted in Adobe RGB.To apply the same tonal interventions I have to keep in account the different gamma (1.8 vs 2.2)? For example,

  • Column ambigously defined

    select distinct kmt.tag_number , fa.tag_number from kfupm_mcr_tag kmt, fa_additions fa where kmt.TAG_NUMBER = fa.TAG_NUMBER SUBSTR( tag_number, 1,6) tag_number; can any one help me out Thanks Arifuddin Edited by: user11309801 on Jan 1, 2011 8:28 AM

  • Data Dic...

    Hai Gurus, After creating a Transparent tabel in se11 for ex : ztable at later if any user click on change mode it should show access key to that .how to do ? We can create in SE11 Transparent tables in the same way we can create for Cluster and Pool