HT4528 cannot access celluar data network safari
What causes this error in Sarfari: Cannot Access Celluar Data Networ?k
The phone is telling you that it cannot connect to your carrier's Cellular Data Network. Got to Settings>General>Network and make sure enable 3G is ON and Cellular Data is ON.
Similar Messages
-
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
I cannot access older data than yesterday.
I cannot access older data than yesterday. How do I fix this issue?
Unfortunately, even though things might be obvious to you, we cannot see your network, or know what you might be thinking, so we need more information from you to be able to help. The bottom line.....we only know as much about your issue as you tell us.
When you say that you cannot access data older than yesterday, are you saying that you have a Time Capsule which has been making Time Machine backups in the past, but you now cannot see any backups that were made before yesterday?
Have you been backing up using other Macs, and you can see all of the backups of the other Macs when you check?
Is the indictor light on the Time Capsule green, or is it blinking amber?
What operating system are you using on your Mac? If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X version number that you see there. -
My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?
WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99. -
My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?
It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.
-
Cannot access external data , Failed to get the document information.
Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJHi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini. -
ORA-12705: Cannot access NLS data files or invalid environment specified
Hi,
I am using Oracle 10g Express, ojdbc14.jar , apache tomcat 5 server on Linux (Fedora 6).
In CustDisp.JSP I have following code:
<%
try {
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
out.println("JDBC driver loaded.<br>");
catch (ClassNotFoundException e) {
%>
error :<br>
<%=e.toString() %>
<%
String sql = "SELECT custid, fname, lname FROM customers";
try {
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
out.println("Connection made.<br><br>");
Statement s = con.createStatement();
ResultSet rs = s.executeQuery(sql);
%>
When Itry to access http://localhost:8080/jsps/CustDisp.jsp,I get following error:
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified.
When I display enviorenment parameters in this JSP, I get follwing:
JDBC driver loaded.
Oracle Home = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
Language = en_US.UTF8
NLS Language = AMERICAN_AMERICA.AL32UTF8
Path = /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
Class Path = /usr/lib/jvm/java/lib/tools.jar:/usr/share/tomcat5/bin/bootstrap.jar:/usr/share/tomcat5/bin/commons-logging-api.jar:/usr/share/java/mx4j/mx4j-impl.jar:/usr/share/java/mx4j/mx4j-jmx.jar
Charset = null
Home = /usr/share/tomcat5
Log Name = tomcat
LD LIB PATH = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/ojdbc14.jar:
Locale = en_US
nls data directory : /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data
I have checked permissions for nls data folder, they are :
Owner: Oracle
Folder Access: Create and delete files
Group: Dba
Folder Access: Access files
Others
Folder Access: Access files
Execute: Allow executing file as program.
I have written a java program and used same drivers,customers table and connection i.e
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
String sql = "SELECT custid, fname, lname FROM customers";
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
it works fine and displays customers.
Only when I try to access my CustDisp.JSP, I get
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified. Error.
Can some one please help me sorting out this problem?
Thanks in advance.
AQKHi,
Relevant code for CustDisp.JSP is given below:
<%@ page session="false" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="oracle.jdbc.*" %>
<%
try {
Class.forName ("oracle.jdbc.driver.OracleDriver").newInstance();
out.println("JDBC driver loaded.<br>");
catch (ClassNotFoundException e) {
%>
error :
<%=e.toString() %>
<%
String sql = "SELECT custid, fname, lname FROM customers";
try {
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","myid", "mypassword");
out.println("Connection made.<br><br>");
Statement s = con.createStatement();
ResultSet rs = s.executeQuery(sql);
%>
Permissions for nls data folder
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/
are :
Owner: Oracle
Folder Access: Create and delete files
Group: tomcat
Folder Access: Access files
Others
Folder Access: Access files
Execute: Allow executing file as program.
In CustDisp.JSP I have following code which accesses ojdbc14.jar
// Check access to the nls data files.
cfile = "";
try{
File myfile = new File("/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/nls/data/ojdbc14.jar");
if (myfile.exists() == true){
cfile="ojdbc14.jar exists in the data directory. Its length is "+ myfile.length()+" It can be read =" myfile.canRead() " , can be written = " + myfile.canWrite();
}else{
cfile="ojdbc14.jar does not exist.";
catch (Exception er){
%>
error in reading file:<br>
<%=er.toString() %>
<%
This code gives following output:
File ojdbc14.jar exists in the data directory. Its length is 1536979 It can be read =true , can be written = false
Every things seems to be OK but when I try to access http://localhost:8080/jsps/CustDisp.jsp, Iget:
Sql Error:
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified
Best regards.
AQK -
Error: 12705 Cannot access NLS data
I have just downloaded and installed 11.2 Express Edition + Oracle SQL developer on Windows 7 but when I tried to connect it returned me an error: 12705 Cannot access NLS data.
I tried to change NLS_LANG param in registry & skipped NLS settings bit it did not helped.
How to resolve this?923110 wrote:
The previous locale was set to Russia
I have Win 7 32xAccording to Installation guide section 9, about supported language configurations, not many language message files are included.
But I suspect something else is going on here. You could try changing Windows OS back to Russian locale and do:
set nls_lang=russian_russia.cl8mswin1251
sqlplus / as sysdba
Fortunately, there are many people who are able to install successfully by simply adhering to the steps in this GuideAs indicated above, with Oracle at the very minimum you need to read and follow the Installation guide for the product.
Oracle Database is an extremely capable development and deployment platform for database centric applications. It is also vast and complex, so don't be suprised if you need to spend a couple of years to get well oriented with it. One of the first things a new user should do is to get familiar with the relevant Documentation library. -
SRS Browser Role Cannot Access Shared Data Sources
I've created some reports using VS and shared data sources and deployed. I can run reports (I'm a domain admin), but users I've given system administrator roles within SRS cannot access shared data sources. However, if I embed the data source, everything
is fine. I'm pulling data from three different servers, so the shared data sources are somewhat important. I'm using SQL Native userid/passwords not windows authentication. Anybody got any ideas? I'm new to SRS. Thanks.Hi Janetb,
I’m confused about the meaning of “cannot access shared data sources”. Are you saying the user cannot see the Shared Data Sources in Report Server, but he can render the report well? Or the user cannot render the report well because he have no permission
to access shared data sources?
If in this first scenario, means that the role of the user have no permission to View data sources. To fix this issue, we can add View data sources task to the current role in SQL Server Management Studio.
If in the second scenario, it is so strange. In my test, I add Browser role of the report to one user which has no permission to access the shared data sources, but he can render the report which retrieve data from the shared data sources very well.
To troubleshooting this issue more efficiently, could you tell us the scenario you occurred and the error message you received? So that we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Xcelsius SWF with QaaWS through SSL: Cannot access external data
I am getting the following error while loading Xcelsius Dashboard in https mode.
Error: Error #2170, Cannot Access External Data
Connection Type: Query as a Web Service
To access external data, add a cross-domain policy file to the external data web server.
The same dashboard is working on the following conditions:
1) In http mode(both from a hosted website and from a clarity portlet)
2) When I click preview from Xcelsius designer.
3) When I run the .swf file directly.
The error is coming only when I host the swf file into a website (or running from a clarity portlet).
I am using the following cross-domain-policy file.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-http-request-headers-from domain="" headers="" secure="true" />
<allow-access-from domain="*" secure="true" />
</cross-domain-policy>
Any comments will be appreciated here.
Thanks,Hi
I am facing the #2032 Error while running the Dashboard in portal developed using SAP Netweaver BW connection.
Scenario:
1>Actually our dashboard changes as fiscal year or budget type changes,so we have set trigger for the queries.
2>for 3-4 trigger times the dashboard changes as required without any error but after that when we change fiscal year or budget type it shows the following error:
Error:"Cannot Access External Data"
{ The BICS Remote web Service could not process your request.Open a CSN message on component BW-BEX-ET-XC and attach the technical details of the error from the following link:
http://sgsgsav0s2006:5000/bicsremotedebug?geterrorticket=KSF-1324043982210(this link changes each time the error pops up}
This error will popup and then the dashboard randomly displays data for some queries and for some it does not pull data.
After reloading the dashboard it runs fine for 3-4 times after that it again shows the error.This happens for 4-5 times then dashboard stucks at Initializing Screen for 10 mins then #2032 error comes.Then we restart our developement portal and the Dashboard runs fine for some time.
This happens even while triggering 4 queries.
We have
Xcelsius 2008 Sp3
Flash Player 10
SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW sp08
SAP_ABA sp08
SAP_BASIS sp08
Dont know how to check Java Stack Version.
Please reply soon,so that we can proceed.
Thanks
Edited by: chinmaypadhi on Dec 29, 2011 7:44 AM -
Cannot Access External Data Error
Hello all,
Please suggest me on Cross domain policy error 2170. I followed the below steps:
Step 1: Copied cross domain file in Tomcat Root and then checked whether its working or not and it got worked in a browser.
Step 2: Restarted Tomcat Server
Step 3: Then opened Macromedia.com and clicked on Global Flash player settings and here i got stuck what are the URLS to be added.
Are the above steps are correct or not?
Thanks
ChanukyaYou could go through the following SAP note:
1751710 - Cannot access external data when viewing the Dashboards in InfoView or BI LaunchPad through VPN
Symptom:
When viewing the Dashboards through InfoView or BI LaunchPad, below error occurs:
Environment:
Dashboards Design 4.0
Xcelsius 2008
BusinessObjects Enterprise Xi 3.1
BI Platform 4.0
Reproducing the Issue:
Create a Dashboards based on Qaaws.
Publish it to InfoView or BI LaunchPad.
View the Dashboards through VPN .
Crossdomain policy error appears.
Cause:
DNS could not resolve the domain name.
Resolution:
Modify the host file entry
Go to:Start ->run-> %SystemRoot%\system32\drivers\etc\hosts
Enter the <ip address><FQDN><server name>
Hope this helps!! -
Cannot access external data - xcelsius
Hi All,
We are currently building QAAWS connections based on the existing webI reports and universes (BO 4.1 SP2 & Dashboard Designer). However, while executing the dashboards on iPad we are getting an error message "cannot access external data". Please confirm if QAAWS is supported on iPads or not. If not, is there any SCN official PAM / document for the same. And, what is the workaround or alternative to QAAWS, since re-mapping is required for the existing dashboards as well.
Best Regards,
SameerHi Shwetha,
Thanks for the needed details.
I have gone through the SCN note 1970047 which talks about user id / pass should be hardcoded within your dashboard for QAAWS. However, I am still getting an error "Cannot Access External Data: Failed while trying to log on user Sameer. RFC error: Number:000 (USER_OR_PASSWORD_INCORRECT)" EVEN if I provide my enterprise credentials and click on preview. The same credentials works for me on BI Launchpad (same web server URL).
Is there any permanent solution / alternate to this issue? We do have a generic enterprise ID, but I should not get the above mentioned error anytime.
Best Regards,
Sameer Sachdeva -
[exec] ORA-12705: Cannot access NLS data files or invalid environment specified
Hi all,
We have an app running ok on WinXP, But if run on Win7 it gets error:
[exec] Caused by: java.sql.SQLException: ORA-00604: error occurred at recur
sive SQL level 1
[exec] ORA-12705: Cannot access NLS data files or invalid environment speci
fied
Is this a sqlnet client issue?
Thanks a lot,
zxyyxes2013 wrote:
I already google it but I am not confident about my result
I need validation from genius guys like you
And as long as you rely on being spoon-fed everything, you will never be confident about your result.
Try the following:
>change jre versión (donwload from http:www.sun.com) and declare the new JAVA_HOME variable.
>try calling this code: Locale.setDefault(Locale.ENGLISH);
before you open a database connection.
> The NLS_LANG must be unset in the Windows registry (re-named is best). Look for the NLS_LANG subkey in the registry at \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE, and rename it.
And where did you find that solution?
Lie On The Internet - YouTube -
Configuring Apach(ORA-12705: Cannot access NLS data files .. )
Hello,
I receive this error while configure an HTTP Server for Oracle XE Database.
ORA-604 LogOn ORA-00604: error occurred at recursive SQL level 1\nORA-12705: Cannot access NLS data files or invalid environment specified
The database NLS parameters is
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET CL8MSWIN1251
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0
DADs configuration:
<Location /elxe>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlMaxRequestsPerSession 10
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString elxe:1521:XE ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.CL8MSWIN1251
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword xxxx
Allow from all
</Location>
What is wrong?It is most likely that the NLS files are missing from the server/pc.
Also look at the apachectl file.
Find the following line:
NLS_LANG=${NLS_LANG=""}; export NLS_LANG
Modify this line to look like the following:
NLS_LANG=AMERICAN_AMERICA.CL8MSWIN1251; export NLS_LANG
Christopher Soza
Oracle BI DBA
Orix Consultancy Services Ltd
b: http://sozaman.blogspot.com
Maybe you are looking for
-
Error in inner join when i am using 3 tables to join..
hi, why error is giving when i am joining 3 tables .. tables : lfa1,lfb1,lfm1. types : begin of ty_lfa1, lifnr type lfa1-lifnr, name1 type lfa1-name1, bukrs type lfb1-bukrs, erdat type lfm1-erdat, end of
-
In this video we'll explore how you can configure a Dreamweaver CS 5.5 site to build a native mobile application using the popular PhoneGap framework - and deliver rich native applications to iOS and Android without needing to learn new languages or
-
Search and related results popups on photos
The past week or so, I have noticed that a black search box is popping up on photos in Firefox. When I mouse over it, a "related results" box pops up. There are also popups in a new window of advertisements. Is this a virus, a known issue, or just so
-
Using MacBook Pro, 15", early 2008, 2.4G Intel core 2 duo, 4G ram. Software update asks to update Firefox 34.0 beta7 every day. If I update, it just asks me to do it again. It has done this through the last several Beta updates. It's a bit disconcert
-
Is there a way to sync my iTunes on my iPad with my PC iTunes?
I have iTunes on my iPad, as well as a MacBook Pro (without iCloud on it). I am trying to get the music from the iTunes on my PC to my iPad. How can I do that?