HT4528 does my 5c with verizon have the option for a sim card

does it have a sim card slot i have mine through verizon

but Verizon doesnt use sim cards in USA there for international use thats what a verizon rep told me on the phone but in the next yr or 2 they will be using sim cards like all the other cell carriers here in the u.s.a.

Similar Messages

Why does bios 1.8 not have the option for 1T timing?

I was just wondering why I don't have the option with bios 1.8 in my k8n neo2 platinum to run 1T command rate? I use it with memtest+ and a64tweaker and it works fine.. I just want to turn it on without software..

look around some more on the forum, there have been some BIOS betas released and can be studied about that may help you if you need a fix now... I know were alll eagerly awaiting aBIOS that will enable dual core for Neo 2 plat, at least I am, but then again I don;t KNOW for sure you'll have too do some research

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Does Premier Pro C5.5 have the option to zoom in on a subject?

Does Premier Pro CS.5 have the option to zoom in on a subject in the video? How about cropping the picture so you remove the "outside elements" that are distracting at the edges of the original film footage? I have a home video of my daughter singing and there's an obnoxious man that I thought was out of my picture while filming. when i uploaded it, I found that I didn't account for the icons on the side of the camera screen and so actually the man is on the edge of the video waving his arms and basically becoming the center of attention while watching the video. I want to zoom in on my daughter thereby cutting the guy out of the left side of the screen so she becomes the focus of the video again. Does Premier Pro do this? Does the trial version do this? Is there an EASIER program to try for this kind of editing? Because Premier Pro is complicated and definitely not user friendly for the very Amateur dummy like me.

PP has a scale facility. If you are editing in the same format as your shoot, the image will start to pixelate at about 5% increase (105% total).
If, however you shot in HD, for example, (1920 x 1080) and want to edit in 720 x 576, you can scale to almost 200% without image break-up.

Does Jabber Client 9.6 have the option to save Chat history within Outlook 'Conversation history' like Lync does?

Does Jabber Client 9.6 have the option to save Chat history within Outlook 'Conversation history' like Lync does?
Any guidance/response would be greatly appreceiated. thanks in advance.

The latest release of Jabber allows you to save the chat you had in html by enabling EnableSaveChatToFile
But yes, IM&P requires a separate server in which to hold all the messages that go thru the server, this is for management purposes, not really meant for users.
Persistent chat will hold all the messages, but this also requires a separate DB server to hold them.
You're free to use any other XMPP client you prefer which has this capabilities on the client side.

I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my hous

Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

I do not have the option for hotmail on my iphone

I want to add my hotmail account to my iphone 4 all the directions to do this are saying select hotmail in mail settings but i have no option for this i have yahoo exchange google aol but no hotmail help

Outlook - right below AOL.

Do not have the option for the universal counting leader in project asset menu

I don't seem to the option for a universal counting leader under the "new item" action, located in my project asset menu on expert view. I am using Premiere Elements 13, on a Mac, version 10.9.5. The others are there -- adjustment layer, title, bars and tone, etc, just not the universal counting leader. Any ideas?
Thanks!

inatgybderstorm
The Universal Counting Leader is there in Premiere Elements 13 Windows 7 64 bit.
I am strictly an Elements Windows user so I am not sure of the history of the Universal Counting Leader in Mac versions.
If you do not find it, it is probably one of the Windows Only features when one compares Windows Mac versions of the program.
Unless a Premiere Elements 13 or earlier Mac user comes forward to confirm one way or the other, I going with this one being a Windows Only for
Premiere Elements 13 and possibly earlier versions as well.
ATR

Lync 2013 click to call from Outlook 2013 does not have the option for Lync call

Hello,
We are currently migrating from OCS 2007 r2 to Lync 2013. We are on office 365, but Lync is on premise. After migrating several users the option in Outlook to click to call someone only shows one option, which is to call the person's desk phone. Before there
was a dropdown where you could choose desk phone, mobile or Lync call. This issue isn't happening to everyone. We are using Office 2013 and Office 2010. Please let me know if you have suggestions or if you need more info.
Not sure if this is related, but some people have lost the option to view their contact's pictures.
Thank you in advance,
Mitch

Hi,
Please see the image below, are we talking about this?
If a contact doesn't have a phone number, we surely can't call him.
You can try updating the Offline Address Book to see the result:
http://www.howto-outlook.com/howto/oabupdate.htm
If I got anything wrong, feel free to post back.
Regards,
Melon Chen
TechNet Community Support

Why do I not have the option for my mini bridge in photoshop?

I have a MAC and photoshop CC 2014 and I do not have any option to open mini bridge or even view in mini bridge anywhere in my settings, options or where it should be at the bottom of my photoshop.
Does anyone know where it is or why I don't have it?
Thanks,
Nicole

Thank you. I was finally able to take to tech support too and they tell me it has been removed. Thanks again. I will take a look at the link.

I don't have "tap to post" for Facebook, I do however have the option for twitter...my share widget IS ON. How can I get Facebook?

I have the "tap to tweet" option in my notifications center, I don't however have "tap to post" for Facebook.
My share widget is on, my Facebook is "on" in my notification center.
I have uninstalled and re-installed Facebook, restarted my phone, everything I can think of. HELP?!

Oops.. I have iOS 6.1.3

I don't have the option for using the design view or the code view? How do I open this view?

When I open the Flash Builder I am not able to toggle to the different views. I am only able to see the code version of the mobile app I am building. How do I turn this feature on?

Javascript?
There is no design view, so you have to run your program to see what will happen. You only have the code editor.

I don't have the option for updating software in my IPAD!!! How can I download IOS7?

When I go to General, in settings, and then go to software update, I don't see the option of update software, it only says "learn more ' about ios7?????

Well, finally I fixed my problem and was able to download IOS7 on my IPAD.the problem was because there was not enough space on my IPad local storage, so I had to free some space by deleting pics and movies. Now it's working fine, but I learnt that I can have an Iflash drive or a wifi external hard disc to put all my files on and relive my local storage.

Oct 2010 - What are the options for Cuda supported cards ?

Hi everyone,
I was just on the Adobe website, and although they say they update their list of CUDA supported video cards, I haven't seen any change
in many months.
at this point in time ( Oct 2010 ) what is the least expensive option available for Premiere's CUDA's options enabled ?
Thanks everyone !
Dave.

Hi Eric,
thank you for that suggestion, I'll do that tonight. I'll take note of the version that was on the CD too.
Harm,
Not sure if I can say this, but I just installed version 5.02, and then loaded a project........... all I can say is...... Premiere with
this new video card that enables Mercury effects is almost better than sex !! LOL. I said "almost" now, let's not forget that :-)
Anyone who works with Premiere, and has been for years, and has now bought a new CUDA supported video card knows what I'm talking about.
My mouth dropped on the floor..... I loaded up 5 or 6 layers of graphic overlays, ... Premiere played that footage as it would with no effects,
I could not believe my eyes.
I then realized I had playback set at the best setting ! , that blew me away even more Harm. I just cannot get my head around how this is going to change my editing life.
A HUGE huge huge shout out to Adobe for doing this. You know how you can listen to others talking about something for months, and you just nod your head and say "that sounds great" , well you just don't fully appreciate just HOW GREAT it is, until you experience it yourself.
amazing is all I can say Harm ! I thank you for steering me in the correct direction some months ago, and I'm so happy I finally made the plunge !
Dave.
ECBowen wrote:
Never use the video drivers from the CD. They are always out of date. Go here and download this driver:
http://www.nvidia.com/object/win7-winvista-64bit-258.96-whql-driver.ht ml
You definitely want the latest with a 400 series card and the MPE.
Eric
ADK

The tray for my sim card went missing would i be able to get a new one

the tray for my iphone sim card went missing would i be able to get a replacement somehow

so have you contacted Apple Care or an Apple store?

HT4528 does my 5c with verizon have the option for a sim card

Similar Messages

Maybe you are looking for