HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with
Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.
Similar Messages
-
I have a recently acquired iphone 4s and despite having good hearing and the volume up to max can barely hear who ever I am speaking to. WHat is wrong with the phone?
The plastic cover was removed before I left the store and I have moved the volume up and down during, before and after phone calls. Have tried it in protective case and out of it. Impossible to hear calls unless phone is on speaker. There seems to be lots of comments re this. Is it a significant flaw? Can I fix it?
-
I can barely hear my ringer or Siri with my volume set all the way up.
I can barely hear my ringer and it's turned all the way up. I can't hear Siri at all but I can visually see that it's working. The ringer is completely silent when I turn the volume down two bars.
Tap Settings > General > Reset > Reset All Settings. If that doesn't work, create a backup then restore AS NEW. If it still doesn't work after restoring & wiping everything off, take it to an ARS or call tech support to get it replaced. Don't worry, all of your info will be backed up if you follow the steps in http://support.apple.com/kb/HT1766
-
When I play Flash videos, i.e. YouTube, the sound is barely audible. I have to crank my speakers way up to hear anything. When I open the same video in IE or Chrome, I don't have that issue, the sound is normal. This just started happening about a week ago, and I have the latest plug-in. I also only have one version of Shockwave on my plug list.
Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html<br />
<br />
See also Flash Local storage settings<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html<br /> -
Can BARELY hear my voicemail even with volume all way up
I just got my iphone 3GS 16GB last week. I noticed this right away. I can't hear my voicemail. Even when the volume is turned ALL the way up and on Speaker, I can barely hear the messages.
What's up with this? Should I return it for repair/another??
Thanks!Are you sure the speaker is on and not off...
toggle between the two just to make sure...
If it's truly defective only an Apple Genius apt will help...
Before that though...since they will ask...you will want to perform a full restore using " set up as new iPhone"
just to make sure it's not OS related -
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.
You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)? -
I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend. -
i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?
Problem with both the speaker and earphones?
Have you tried another pair of headphones?
Yu can try the standard fixes to rule out a software problem:
- Reset. nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod. -
When watching a movie on my iPad 2 with headphones (they're Bose so good quality) on a plane I can barely hear even with volume at highest level--any suggestions on how to increase sound level outside of normal settings-sound level even lower when using a splitter--thanks
Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound. No problem getting plenty of sound volume for music, only videos.
-
i cannot install adobe reader. I get so far and get the message "Error 1324. All folders or the volume is invalid. Please enter it again" can you help?
We need to know if any registry settings are causing this error. Please follow these instructions:
from Windows Start | Search: type regedit and hit Enter; you will see a window like this
now click on the little arrow ▹ left from HKEY_CURRENT_USER
Next click the arrow ▹ beside Software, then Microsoft, then Windows, then CurrentVersion, then Explorer, then click on User Shell Folders
all entries on the right side should start with %USERPROFILE%
If you have anything different, this may be the cause for the install failure.
Now you need to repeat the same thing for another key:
▹ HKEY_LOCAL_MACHINE ▹ Software ▹ Microsoft ▹ Windows ▹ CurrentVersion ▹ Explorer ▹ User Shell Folders
Here all entries should start with %PUBLIC% or %ProgramData%. If you have anything different, this may also be the cause for the install failure. -
My I phone 4 won't restored saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
Need help accessing the router web page. I have been tol...
Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanksWhat router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM -
Can anyone help me, I need to change the address (country) from US to UK so i can purchase?
can anyone help me, I need to change the address (country) from US to UK so i can purchase?
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
Maybe you are looking for
-
Robohelp 10 output line spacing for numbered lists is off
I wondered if you have had this situation occur with your output from Robohelp 10. I created my help system and CSS using Robohelp 10. My CSS contains a numbered list style and an alpha list style, both having line spacing of 3pt before and 3pt after
-
HT4901 how do i get holidays on my calendar
holidays for my icloud calendar
-
How to edit OIM form filed properties
There is pre-existing OIM form for Xellerate User resource object. The Name of the form is Users. I know that I can add additional fields to this form using 'User Defined Fields Definition' tab. But I need to be able to edit properties of existing fi
-
Where is front panel datasocket connection
After successfully using front panel data socket connections in the past I have now discovered that the menu item is gone. Anybody have any idea as to why? LabVIEW 8.0.1 WinXP/SP2 Why can't I paste a screen shot? LabVIEW 8.0.1; WinDoze XP aut viam
-
Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory s