HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

i have incoming and text messaging to the maximum volume. How can i increase it?

If while you are in Messages and set the volume, that is all you can get. You can try and see if Volume Limit is checked by going to Settings>Music and see if Volume Limit is off.
The only other thing I can recommend, is to create your own ringtone/text tone in a music editor and increase the volume in the file. You may also want to check your speaker area and see that it is clean and not blocked by any debris.

Similar Messages

How do I increase volume for my iPod in the iTunes settings? (Classic 160g)

I need help adjusting the volume on my iPod Classic 160GB. I know there's a way to go into iTunes with the iPod connected to the computer and adjust, but when my iTunes updated to version 11.0 I have no idea how to do it. Any help would be appreciated.

iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases
For other music yo need a thrid-party program like one of those discussed here:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

Fax line used for outgoing calls when incomming fax not coming in?

So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
Let me back up.
Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
Is all this possible? Is it only possible in PBX style or is mixed ok?

Is there a Dedicated Volume for both ringer and mu...

I'm unalbe to find this option, but on ios, i was able to have seperate volumes for my ringer and music or media. I could have my music volume set high, while incoming allerts such as calls or messages set to a lower volume. Are these options available on the lumia 920?

Lumia 920
Seroius flaw....makes me wonder if software designers ever use these phones.
Why in the Hell can't I set the ringer colume, speaker phone volume, key touch volume, etc. separately?
-Wife goes thry the roof when I dial a call with the volume on 15.....they key touch tone should be able to be set independently.
-Key click when entering text....I want to hear it, but I don't want to bother everyone around me with hearing it.
I shouldn't have to reset the volume 4x to text, make a call, switch to speaker
Get your **bleep** together!

How to set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time?

How do I set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time? I have limited internet quota but unlimited sms!

Thanks!!
The reason I don't want to set it off is because I want to let others send me iMessage - most people prefer that according to their plan.
How do I bring this request to the hands of the people doing the ios updates? Maybe they could work on this for the future...

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hello! My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB: for my wife and myself. But I have a question to you. Will it work in Russia? How much will it cost for me? And how much will delivery cost to Russia? Thank you very much.

Dear Sir or Madame,
My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB online, from your official website Apple: for my wife and myself. But I've a question to you. Will it (iPhone 5, 64 GB) work in Russia? How much will they cost for me? And how much will the delivery from America to Russia cost?
Yours sincerely,
Vadim Fedotov.

iPhone 5 is not available unlocked in US and
Apple Store online does not ship outside the Country it operates
You are best served waiting for the iPhone 5 to be announced in Russia
through your Apple Approved carriers

How do I disable transparency for the menubar and addressbar in firefox?

How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
It is difficult to read.
Edit:
Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
I know what Aero is and how to turn it off.
The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

If you are up to tweaking some CSS code in a style see
"Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

HT201304 How do I prevent paying for an app and what is an in app restriction

How do I prevent paying for an app and what is an in app restriction

You can't prevent paying for an app if you buy one. You can, however, turn off the ability to install apps in the Restrictions settings (Settings/General) which blocks the App Store app on the iPhone. You can also block making purchases of extra features or capabilities from within an app, which is referred to as an "in-app purchase", in the same Restrictions.
Regard.

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

If your forgot the administrative PW for the computer reset the PW
OS X: Changing or resetting an account password
OS X Lion>: How to Easily Reset the Administrator Password

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

Similar Messages

Maybe you are looking for