HT4528 I get the message "NO SIM" on my iphone. This phone worked fine yesterday. What has happened?
"NO SIM" appeared in the upper left corner of my Iphone 5. I can not send texts. The phone was working fine yesterday. What do I do?
The Sim may have moved slightly and lost contact.
Try in this order:
1. Turn on Airplane mode for about 1 or 2 minutes, then turn it off.
if that Deos not work,
2. Reset: Hold down the Home and power buttons until the Apple logo shows up. Let the Phone reboot.
if that does not work:
3. Open the Sim tray with the provided sim tool or a paper clip, and reseat the sim card.
if that does not work:
4. Try a different sim card from your carrier if you have one available you can borrow.
if that does not work:
5. Contact your carrier, the sim may have developed a fault.
Similar Messages
-
Why do I get the message "no SIM card installed"?????
Why do I get the message "no SIM card installed"?????
That will generally mean that your sim card is damaged and/or corrupted, or it may mean it is inserted improperly, may need to take it out and reenter, or maybe its gone for some reason, lol
Probably the first one. Hit up a Verizon corporate store and have them give you a free fresh one. -
When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I'm trying to update iTunes to 10.5.2. I have a Windows 7 64-bit Dell laptop, and when I try to update it, I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went to the troubleshooting page and did all of the steps they listed: uninstalled iTunes, deleted by Temp files, even disabled AVG while I downloaded again and tried to install. I still get the same message. If anyone can help me, I would really appreciate it!You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651 -
I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn
I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.
-
iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?
I have had the same issue since day 1 of the ios5 installation. I always hit "Cancel" and then the iPad eventually shows up again in iTunes. Then a few hours later, I get the same message again. Annoying, but I've not found a way around it.
-
I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!
Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.) -
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.
That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2 -
After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open???? held down the option and the command and tried to run what was ticked off and it just sits there with a spinning wheel and does nothing, can I throw the app away and download a new one? or will it still not open?
, can I throw the app away and download a new one? or will it still not open?
You could, but the error message is indicating that your iPhoto library needs repairing.
Check, if iPhoto will run, if you launch it on a new library. Hold down the alt/option key, while you launch iPhoto. Select to create a new library from the panel that will show. Can you create a new library? If yes, try again to fix the library. Which options have you tried from the Library First Aid panel, when you launched iPhoto with the option and command key held down?
If you have not tried "Rebuild"; do that next. But be sure to make a backup of your iPhoto library, before you try this. -
TS4425 Why do I get the message "there's no photos in this album"
Why do I get the message "there's no photos in this album"?
hi
i was wondering if you found a solution to this issue because im getting the same message
thanks -
I get the message "an error occurred while processing this directive" but no hint of what the error
I am trying to download Photoshop for the first time. I get the message "an error occurred while processing this directive" but no hint of what the error is or what I should do about it.
Graham which version of Photoshop are you referencing? Also which operating system are you using? Finally can you please post a screen shot of your error message?
-
I get the message: Installer failed to initialize. This could be due a missing file.
I get the message: Installer failed to initialize. This could be due a missing file. Could someone help me?
The installer for what product? On what operating system?
-
Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!My situation:
- get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
My system: XP SP3 with all latest updates.
Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
- ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
- ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
- removed all apple software update registry entries.
- removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
- removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software update folders) (hidden folder).
- DID NOT need to restart
- downloaded latest iTunes update (1051)
- opened using WinRAR
- extracted all files
- ran JUST the apple software update MSI
- it succeeded
- ran JUST the iTunes MSI
- it succeeded
- normally I then uninstall the apple software update program, but DID NOT this time
- DID NOT need to restart
Hope it works for you.
Maybe you are looking for
-
How do I put a fillable form on our website so people can fill it out and send back to me
How do I put a fillable form on our website so people can fill it out and get it back to me.
-
Hello, I installed Solaris 10 x86 10/09 using ZFS in vSphere, and the disk image was expanded from 15G to 18G. But Solaris still sees 15G. How can I convince it to make notice of the expanded disk image, how can I grow the rpool? Searched a lot, but
-
Premiere Elements 10 Video Stops Playing
I've been using PE10 since March of 2012 without issue. Sometime within the past 2 weeks a problem with the video transport has occured. Video and audio play fine but as soon as it tranitions to a still image the video holds on the image while the au
-
Import java class from model package
I have a java class in model package.I create a managed bean in the view package and I want to import the first java class with "import model.class1" but this error "import model.class1 not found" is shown.What should I do?
-
AA 7.0 Document can´t read the file correctly
Hello , I have a pdf document created for AA 4.0 and higher and if it is read in Adobe Acrobat 7.0 Document it has wrong font (accents). If I open the document in AA 9 or even in ordinary Reader, it is fine . Is there a problem in the document or in