HT4528 i had 2 iphones on my verizon account. they were both stolen and reported through verizon, but seems that the people that stole phones are still able to use them under another carrier. the device ids are 100003605d73e for the black iphone and 99000
I had two iphone 4 that were a part of my verizon account. both the phones were stolen and are apparently still being used. the device id for the white 4s is 99000267591838 and the black iphone4 A100003605d73e. Is there any way apple can check with verizon with my permission and verify and at least make the devices unusable to theives?
"Is there any way apple can check with verizon with my permission and verify and at least make the devices unusable to theives?"
You can report the IMEI to Verizon.
Similar Messages
-
Do you need to use async with sensor values to be able to use them in another method?
I have this code but when button click event is triggered sensor data stops being up dated. I would like the rotation to be constantly displayed.
public void OnSensorChanged (SensorEvent e)
if (e != null)
rotationEditText.Text = e.Values [2].ToString("0.0");
public void button_OnClick (object sender, EventArgs eventArgs)
Thread.Sleep(5000);I have two tasks that I'm trying to accomplish,
Calibrate Button click event reads phone orientation, waits one second, reads phone orientation, waits one second and then reads the phones orientation for a third time. In this event it will only record the orientation if the readings are within a percentage
range. This is to ensure the phone is stationary and recorded orientation is very accurate.
Recording Button click event is a lap timing method where the accelerometer and orientation readings will be recorded with the lap times.
In both cases the sensor readings need to be accessible in another method.
I tried changing the public void OnSensorChanged(SensorEvent e) to async but then it through an error saying there was no OnSensorChanged event. -
I simply have suggestions: I think u should be able to store whatever u have on any devices to iCloud. For example: it shouldnt matter where I have my songs from, we long as they are on my devices I should be able to save them on iCloud. In this case, I think iCloud is more like a ripoff if you cannot store your own songs to it.
I simply have suggestions: I think u should be able to store whatever u have on any devices to iCloud. For example: it shouldnt matter where I have my songs from, as long as they are on my devices I should be able to save them on iCloud. In this case, I think iCloud is more like a ripoff if you cannot store your own songs to it.
-
why is there a third opening next to the phone speaker (besides the camera) on the white iPhone 5 but not on the black version
That's probably the ambient light sensor. It's on the black iPhone too, it's just not as visible.
-
I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!? -
I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you -
I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
I am thinking to buy an Iphone 4s from USA. So I just want to know if I buy an unlocked phone will I able to use it in India with vodafone network. Can u also suggest where to buy the unlocked iphone 4s in USA.
Thanks for ur reply. I will make sure that I buy 4s from nearest istore in USA where unlocked phones are also available. And yes I know about the warranty which is applicable only in USA. Ur reply has been very helpful for me thanku
-
I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?
Where did you get iDVD to put on your Mac? The downloading themes are no longer available from Apple. If you copied it from a Mac that had all the themes look for the iDVD folder on that Mac which should be in the HD/Library/Applications Support folder or the Users/Home/Library/Applications Support folder. Copy it to the HD/Library/Applications Support folder for Mt Lion.
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT -
I have an album that I bought that is in my purchased bin but seems that the tracks are disconected or the machine coul not locate them...
Your should be able to delete the broken entries, then redownload from the Purchased link in the right-hand column of the iTunes Store page.
tt2 -
I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.
hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi -
I want to buy the new iPad in America with 4G, but I moving to Australia permanently. Will I be able to use any 4G networks once they are supported in Australia?
Actually it depends on the Bandwidth of the network they will be using. You can see a list of tech specs on the iPad website.
-
Simple question
I have Adobe Creative Suite in my office and I want to be able to use it on another PC in the same room
Is this possible? – more than happy to only use one PC at a time as I am now using a colleagues PC
I would need a password
I have my original End User Purchase OrderAdobe ID, sign in, and account help
If that doesn't work, try Web Chat:
Adobe ID and registration support -
Nothing was deleted. We opened up the app and they were all gone. HELP!! I have restored the ipad and they are still not back!
Are the files in www.icloud.com (use your computer to check).
-
Hi, imessages won't send from my macbook pro. I am still able to recieve them on mac. I am also able to send and receive on iphone. However on mac every time i press send (enter/return) it disappears, with no red '!' or anything. Any help?
Triple check the Outgoing Mail server info that you entered in your Mail account. If that area says the info is optional enter the outgoing mail server and your password anyway. Also if you have more than one email account check the server that is selected for the GoDaddy account and make sure it's the correct server for the account.
Maybe you are looking for
-
I'm using Adobe Drive 3.0.1.104 on Windows 7. When I drag and drop multiple assets into the Explorer Window, right-click those assets and choose "Check In..", none of the handlers associated with my custom checkin dialog (i.e., CanEnableCustomCheckI
-
How can I get Lightroom to export my edit to a jpeg that looks the same ?
Hi everyone, I can't get my jpeg export to look the same as it looks in lightroom after edit. The jpeg isn't that different but still, way too much for me. I did use sRVB, 100% no scaling etc... but it seems the export won't take "all" of my noise re
-
I don't know which forum to post this so I'm just posting it here. I have 2 questions. First one is, how come my hard drive doesn't recognize windows anymore? Second is how do I convert a swf file to a movie file?
-
A bug? Layer styles change or dissappear when you flatten/merge layers.
Does anyone else experience this problem in CS3? An example for me would be, right now I have an outer glow with noise applied to something but when I flatten the few layers I have in the file, the noise simply disappears or the glow becomes faded. W
-
Why can't I open simple pdf forms from IRS since Maverick upgrade?
Since my ugrade to Maverick I am having several frustrating challenges primarily with Numbers and today tried to open a downloaded pdf irs form and I coninue to get message that Adobe cannot open because it does not support this form or it is corrupt