HT4528 I installed the update on my phone and now my phone will not turn on
I installed the update on my phone and now my phone will not turn on
I installed the update on my phone and now my phone will not turn on
Similar Messages
-
I have the iphone 4s and just did the software 6.1.3 and now I can not zoom with the video, I have gon into settings and all but can not fix this did anyone else have this problem and how can I fix this? thanks
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
I've updated to iOS 5 and now my itouch will not sync.
Hi There:
My hard drive crashed and has recently been replaced. I've downloaded some new songs from iTunes but now my itouch will not sync. It states something about, "sync failed to start" but doesn't state why it failed. I would really appreciate any ideas of what to check for. I'm not really good at this.
K.Did you authorize your computer again? About iTunes Store authorization and deauthorization
Can you back up your ipod manually by right clicking on it in the device list and choosing backup? -
I clicked all the buttons in the file sharing window and now my iMac will not turn on.
I really goofed. I clicked all the buttons in the file sharing window (Screen sharing;File Sharing...Remote Login; Remote Management...Internet sharing) but I did not write down the IP address and now the computer will not turn on at all. Is there a way to roll back my stupidity and get this thing to turn on again?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
today firefox performed an unexpected update and now it doesn't work (connect to the internet)
See --> [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
i recently updated my apple tv to 5.1 now the wifi will not connect all other evices in the house are working fine, any help out there
Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again. After that it shou,d save your device
-
I downloaded the new version of iTunes and now my iPod will not open in iTunes
I recently downloaded the new version of iTunes and not my iPod will not open in iTunes
Hello, srg60.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I have changed the CPU on my pc and now Potoshop Elements10 will not load.
I've just updated my computers CPU and changed the clocks and BIOS so that I could run Premiere Elements 10. This went ok And Adobe are going to update this program .
BUT the problem I am having now is that the Photoshop Elements 10 won't load an it's saying that Iv'e got it loaded on 2 computers and that one must be disabled or the program wont run in so maney days
I have not changed the hard drive and only have one copy loaded on the drive I have tryed to cotact Adobe about this but am having trouble with that, and thought someone may have had a problem like this.As this is a user to user formum mostly, only adobe support can sort out activation problems such as yours:
http://www.adobe.com/support/download-install/supportinfo/ -
I just got a gopro 3 and ejected it the wrong way from my Mac and now I cant move files from my go pro to my Mac.. Can this be fixed?
GoPro Customer Support - FAQ, Troubleshooting, Contact Us
-
I bought iphoto 11 for my mac book pro. I already had an older version of iphoto. Every time I use iphoto 11 is turns my computer off abruptly. Please advise. Thank you.
Do you get this type of screen:
If so boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try launching iPhoto again. If that's successful reboot normally and try iPhoto again.
If the window isn't as shown above as a quick test try this: Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
WWifi not working after installing iOS 8.1 Any help?
Hmm, certainly no expert here, but is there another phone that can verify that the wireless router is functioning properly? Afterwords, I'd likely do a full back up in iTunes and then wipe and reinstall 8.1. Test the wireless under fresh install conditions and see how it behaves. If it now functions as expected you could then do a full restore from the back up you made. Others may have better ideas however.
-
Hello all
I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain. -
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I have tried to install the updated version several times, and each time I get the same message. I have never experienced this kind of a problem with Mozilla before.
I have a Windows 7 system and a new computer, so I suppose it's not a computer bug.Here is a pic.
-
My laptop died in the middle of updating my iPhone 4 and now my phone is frozen. What do I do?
My laptop died in the middle of updating my iPhone 4 and now my phone is frozen. What do I do?
First try forcing it to shut down: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If you don't get anywhere, restoring it is the next step:
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector)release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Maybe you are looking for
-
Where used list for planning variable
Hi I have one variable in a planning area. Can I find where it is used..? in which planning function or layout? Is there anything like "where used list " for variables in BPS. Thanks for your replies. Nandita
-
Hello World, In My application I need to write flat text files as from a PL/SQL script procedure. The application is third tier architecture, with a SGBDR server, a application server, and a Web server. The PL/SQL script procedure is running on the a
-
Every year we do a fundraiser to help my job, but my co-worker is getting frustrated. We receive outside files laid out in Illustrator, but the person who does the file sets all of the text using compound path. These aren't one or two lines of text
-
Change a sales order while delivery
Hi Gurus, I need to change the status of a sales order line item from being complete to incomplete in case it fails some validation during delivery creation. I was earlier planning to code this in the copy-control routine ( order to delivery) and us
-
Windows Script Component Registration Generate 0x80004005 Error Code
Scenario : I create a simple .hta for managing students information and personal data. I create an application registration system which is required by the user to register the .hta before using it (Freeware which required registration for software b