HT4528 iPhone 5 No Connectivity & Unable to Send/Receive Mail

Is anyone else having connectivity issues?
I'm in NC, have an iPhone 5 if connecting via wifi I am unable to access the internet. I receive the message "Safari cannot open the page because the server cannot be found." I have tried multiple websites, same message. I've attempted this on two different networks, same result. If I turn off the wifi, I am connecting via LTE and again, the same message.
Email - If connected via LTE, I CAN send and receive email...... But if I connecting over wifi, I am receiving "Cannot Get Mail. The mail server "imap.gmail.com" is not responding. Verify that you have entered the correct account info in Mail settings."
I have made NO changes to any of my settings. This starting last night around 8pm EST and is still continuing as of this morning 8am. I have a wifi iPad2 that is functioning correctly. Also, I checked checked my folks iPhone 4 and iPhone 4S both on Verizon and they are functioning correctly.
As for the iOS software info. I cannot access this on my phone whether I am connecting via LTE or wifi. When I connect my iPhone to iTunes I receive the following "iTunes could not connect to the iPhone. An unknown error occurred (0xE8000065).
So I am leaning towards this being an iPhone issue vs an issue with Verizon.
Helps???? Thoughts?????

Also, appears to be affecting iMessage. I can send, but only as a text message, not iMessage and only over LTE, not wifi. I cannot receive any text of any type. They do show up on my iPad because the text was sent from an iPhone 4.
Thanks!

Similar Messages

HT5225 unable to send receive mail using Mail 2.1.3

Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version. I didn't think it would affect it. Someone please help as to how I can rectify the issue!

Hi,
Please review the following note:
Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
Regards,
Hussein

I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone.

I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone. Txt msg is disabled on iPad. I have no idea what to do. I called the support line that I Pay $9.99 a month for. They told me to delete my iTunes account. Will I lose all my pics on my ipad? I have no music download. I'm getting ****** at this whole thing. And it allllllll started with apples update to the ios7.... I HATED IT. Help.

What your iPhone using friends label your phone number in their contacts is irrelevant. I don't know who you pay $9.99 a month to but it's not Apple. You can't disable text messaging on your iPad as it is not capable of SMS.
Do you still have the iPhone? If so, log out of iMessage on the iPhone.
Try this:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
Also, try changing the password on your iTunes account.

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

Turns out this was a simple set up error for me, although i'd set up mobile me to sync my e mails I had never set up my outgoing message server. Therefore, if I received a message from me.com I could reply no problem, however if the message came from aol.com I couldn't reply.

Why am I unable to send e mails from my IPhone or IPad and get message rejected from outgoing server, message placed in outbox

Why am I unable to send e mails from my iPhone, and get message rejected by server and message put in outbox. I have tried changing server ports but to no avail. I am not very technically minded so any suggestions in laymans terms please. This is a big problem as I work away frequently and need to answer e mails. This also happens when at home and on my own wifi.

Hey Pam3008
The article below will give some troubleshooting steps to resolve Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

TWO PROBLEMS:( BLACKBERRY CURVE 9300) 1) Unable to send/receive e-mails 2) black square with a minute hand whizzing round

Hello,
I have a BLACKBERRY CURVE 9300
i would be most grateful if someone could help me with persistent problems, which ive previously enlisted the help of T-mobile to resolve but to no avail.
1) I am unable to send/ receive e-mails, this has been an ongoing problem which seems to sort itself out for a short while then returns, i have been asked to remove e-mail accounts from device and re-boot, and as i say works for a short time then starts again.
2) I have this annoying black square in the middle of the screen with like a second hand whizzing round which can sometimes last ages. I was told by t-mobile this was due to not doing regular device updates, i have since done this and as i type continue to see this symbol.
Any advice/suggestions would be gratefully received.
Thankyou.
Andrew Goodall

The spinning clock is usually an indicator of low memory. Make sure you are completely closing apps your aren't using by using the close or exit option in the menu instead of just backing out of the app with the escape key. Also check your memory after you have rebooted your device. If it is still low then you may have to delete apps you absolutely don't need or use to get memory back.
As for the email issue I am assuming you have a data plan since you have tried to fix the problem with Tmobile. If you haven't done so you may have to re-register your phone on the network and or log into Tmobile's BIS site to resend your service books.

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

I am unable to send the mail thru my GMAIL account.

i am unable to send the mail thru my GMAIL account
below error msg is diplyed
This message could not be sent. It will remain in your Outbox until it can be sent. This message could not be sent because your account does not have a prefer

Hey there meera singh,
I would suggest that you attempt the troubleshooting steps found in the following article to help you address this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Send/receive mail

Our application needs to send/receive mails from a mail server in NT
environment. Does forte provide SMTP and POP3 protocol support(libraries)
so that we can use external connection class to connect to the server and send/
receive mails or do we have to use third party controls. Any help would be
appreciated.

I think with the .mac account that is a known bug, and just click ok, at least that is what I do. I would assume the same with your cable ISP. Let's hope that is solved with 10.5.2
As for your accounts being offline I also get the same behavior, either when I reboot my internet connection but Mail is still opened or randomly for certain accounts. I have only found that either waiting for a while or quitting Mail and opening again will work. Again, let's hope whatever strange behavior here is fixed with 10.5.2
I know I am not offering any solution here, just confirming that others are experiencing the same behavior.
hope this helps

Mail stops connecting to server to receive mail

Hello all,
I have two machines that have problems connecting to server and receive mail. One is a desktop with 10.5 (+updates) and another is a laptop with 10.5 (+updates).
The desktop is located locally in windows network. It is connecting to a Windows 2003 Standard server with Exchange 2003 Enterprise (+updates). Mail application is configured with IMAP account. After awhile Mail application stops connecting to the server. Connection Doctor window shows attempting to connect. Once the server name is changed to IP address of the server, the mail program can connect fine.
Server responds to a ping command with domain name, I can login through telnet and send the email while mail application is stuck connecting. It takes a long time to verify SMTP server name when the account is configured.
Same happens to the laptop but it is connecting through internet. There are Outlook clients that do not have any issues connecting (configured with IMAP).
Any suggestions as to what could be the problem?

Anyone still having this type of problem should look at Lee's solution here:
http://discussions.apple.com/thread.jspa?messageID=6492554#6492554

How to configured different AD sites mailbox user able to send & receive mail to each other?

I have 2 system in one system i configured DC=Yahoo.com + Xchange07 & on 2nd sytem i configured DC=Google.com + Xchange 07 successfully configured (in VMware)
I already made entry of Both DC's DNS entry of New Host record & NewMail Exchanger (MX)
both DC ping each other with DC name i.e. yahoo.com DC ping to google.com & vice-versa.
Same AD site mailbox user able to send & receive mail but google.com mailbox user can't send & receive mail from yahoo.com as vice-versa.

Hi,
I recommend you check if you can telnet the other CAS/HT server on port 25 from each side.
If it connects, is there any error message or NDR when sending or receiving email from each other?
If it fails, please check if port 25 is open. If you have a firewall enabled, please make sure that port 25 is open. Besides, please check whether the DNS records have been configured correctly.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Smtp "offline" message, unable to send e-mails

I am unable to send e-mails from my Mac Mail. Receiving is no problem. I was just online with my internet/email server, did everything they told me to, which didn't solve the problem; they told me to contact Mac.
I did all the usual things, as recommended on the Mac website under "can't send e-mails". I was told by the Telus agent to select port #25 to be the custom port, which I did. I keep getting the SMTP offline notice in the "cannot send message" box. the "Doctor" tells me that trying to log-in to this account failed, verify username and password (which I did).
Any help would be appreciated!
Thanks

Hi
I've had a mac for years (10.5.8) and Telus for one year and this just happened two days ago to me too.
Would you believe all I had to do was remove the server settings and then re-enter them! Check the Telus website for the instructions. Mail sends no problem now!
Here's how I figured it out: .
I used the report within the mac server settings once the error occured and copied the text in order to review. I found this strange caption:
READ Jun 23 20:51:51.885 [kCFStreamSocketSecurityLevelNone] -- host:smtp.telus.net -- port:25 -- socket:0x145cf7f0 -- thread:0x145ce2f0
554 edmwcm02 bizsmtp ESMTP server not available, your ip is balcklisted by spamhaus. Go to http://www.spamhaus.org/query/bl?ip=70.69.240.140
SO I went to their website and it suggested to check to box for stmp authentication for a quick fix. So I checked with the Telus instructions on their site and it said NOT TOO - so don't. Its sounds like spam glue!
Long story, Macs rock, everything you need is there, just think and you can use it allot easier and more to suceed than windows.

RE: (forte-users) send/receive mail

Hi Nat,
you have three possibilities to integrate MAPI to a Forte program:
1. using mapi32.dll (simple MAPI) or mapix32.dll (MAPI). You must integrate
this libraries using a C wrapper class (as described in "Integrating with
External Systems").
2. using OLE Active messaging library ( as described in 'Integrating with
Windows and Macintosh")
3. or implement POP3 using an ExternalConnection class.
Regards,
Zenon Adamek
Forte Developer
Purolator Courier Ltd.
ZAdamekpurolator.com
-----Original Message-----
From: Nat Balasubramaniam [SMTP:NBalasubdcjs.state.ny.us]
Sent: Wednesday, January 26, 2000 2:18 PM
To: Forte-userssagesoln.com
Subject: (forte-users) send/receive mail
Our application needs to send/receive mails from a mail server in NT
environment. Does forte provide SMTP and POP3 protocol support(libraries)
so that we can use external connection class to connect to the server and
send/
receive mails or do we have to use third party controls. Any help would be
appreciated.
For the archives, go to: <a href="http://lists.xpedior.com/forte-users">http://lists.xpedior.com/forte-users</a> and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hi,
Unfortunatly, Forte does not provide SMTP and POP3 protocoles.
But, you can use External connections to do it if you need.
You can find a simple SMTP send mail sample code on
http://perso.club-internet.fr/dnguyen/ . The receive should be as easy as the send.
For MIME base 64 encoding and decoding, it should last one or two weeks of coding
(if you need optimization).
One advantage of coding this in Tool directly is the portability.
In your case, on NT, you could also interface with MAPI using for instance the
ActiveX interface.
By that way, you will already have SMTP, POP3 and MIME.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
edwardsmjwillis.com a écrit:
Hi,
Our Forte development team are currently investigating how we can add internet
mail capabilities to a Forte application. Our application needs to send/receive
mails from a mail server in an NT environment. Does forte provide SMTP and POP3
protocol support (libraries) so that we can use external connection class to
connect to the server and send/ receive mails or do we have to use third party
controls ?.
Any help regarding code examples or third party solutions would be appreciated.
Thanks in advance
Mark J Edwards
Senior Technical Specialist
Willis
Email: edwardsmjwillis.com
The information in this email and in any attachments is confidential and may be
privileged. If you are not the intended recipient, please destroy this message,
delete any copies held on your systems and notify the sender immediately. You
should not retain, copy or use this email for any purpose, nor disclose all or
any part of its content to any other person.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

HT4528 iPhone 5 No Connectivity & Unable to Send/Receive Mail

Similar Messages

Maybe you are looking for