HT4528 iPhone5 suddenly can't connect to home network
I've turned my phone on and off, I've turned wifi on and off, I've clicked on static and back to DHCP, none of these suggestions from other posts have resolved my issue! Other iPhones and iPads are on home wifi. My phone just suddenly went to LTE and says "unable to join network"...
There are two ends to a network connnection: try rebooting the router. Just unplug the power for a few seconds. No settings are lost.
Similar Messages
-
Hello my iphone 3g can not connect to home network via wifi
Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.
I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail -
Suddenly can't connect to home wireless network
All of a sudden I can't connect to my home wireless network - always has worked perfectly. Now I get a box asking for the password, and although I type it in correctly it keeps saying "incorrect password." I thought I'd delete it and re-establish it, but it doesn't show up in the Managed Network settings. Any ideas what is going on?
On the problem computer, go to Control Panel > Printers and delete all instances of the printer.
Next, print a Wireless Network Test from the front of the printer (Network menu). Note the printer's IP address.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Suddenly unable to connect to home network
My new Macbook 2.0Ghz recognised our home wireless network within seconds of being set up, and has worked fine for 2 days. But today it is no longer connecting.
The network appears under the airport icon in the menu bar, but when I click on it an alert box comes up after about 20 seconds saying ‘There was an error joining the airport network Netgear.’
According to Network Diagnostics, all the network systems have failed. The Network icon in the Finder side bar no longer shows a server, and the System Profiler says ‘Wireless network not available’.
We have 2 other Macs in the house, and they are both working fine. Any ideas about what’s suddenly gone wrong with my new Macbook, and how to fix it?
Many thanks in advance for any help you can provide.I don't want to start fiddling around with the hardware on my new machine, Rick, but I've tried a few other things.
I changed the channel on my router from 11 to 3 this morning, and it appeared to work - suddenly I could connect straight away, even with all the other computers using the internet. However, when I started my macbook up later on, it did not connect.
It does seem that if I reboot the router and go online first (ie. with the other computers switched off), I can connect. But obviously that's not a proper fix!
I've also downloaded iStumbler on all the computers, and it shows 0% noise for the connection on the others, but 9% on my macbook. I don't know if this is perhaps affecting my connection?
I've also tried resetting the network settings (by removing the SystemConfiguration folder) and manually configuring my connection, but with no success.
Has any one got any ideas? -
Can't connect to Home Network and Printer
hi,
I just bought my first mac, its a macbook with leopard, and am having quite a bit of trouble connecting it to our home network. I'm not much of a computer whiz, so i have no idea what to do. Our network doesn't have any security, but does need a password, and each time i try to connect it after putting in my name and password it says "The Volume cannot be Mounted" and then comes up with an error message saying "an unexpected error occurred". And because i cannot connect to the network i cannot connect to our printers and need them desperately, i start uni in a week!
what can i do?
thanks
dan
if more details are needed let me know...What version of Leopard are you using? I asked because Apple just released 10.5.2.
Plus if you are adding a lone Mac to a windows network then read the user reports at MacWindows.com (you should have the site bookmark if you are going to mix Macs into PC networks).
Message was edited by: satcomer -
Wifi can't connect to home network but can to school network and via ethernet
My MBP cannot connect to any of my home networks (we have three, same ISP but not the same security) but it can connect to my unsecured school network and to my home network via ethernet cable. Other devices can connect to the network, including my iPhone, my fathers machines... etc.
I spent an hour on the phone with apple care and tried a large variety of things...
Changing my DNS settings to add 8.8.8.8 and 8.8.4.4
deleting the .plist settings in my system config folder
running diagnostics 500 times
restarting
reinstalling mt.lion (without wipe)
restarting the router
and a lot more.
Basically, it says I have full internet access and diagnostics tells me there is nothing wrong. Green light and everything but not a single program can connect to the internet while I can connect to home based servers.
I cannot ping anything and I cannot access any websites using either their IP or their domain name.
Needless to say, this has been getting quite frusterating and I'm running out of ideas.Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, reboot as usual and post the results. -
Mac can't connect to home network
I have a MacBook that I purchased back in Jan 07. It can see my home network, but when I select it it goes through the pacing of the Wifi indicator and then goes to a grey wifi indicator with an exclamation mark and it says "Alert! No internet connection"
On top of this, all I get for a mouse icon is the beach ball. I can still do things, except open finder. What is going on with my mac? I ran a disk repair on it already. Any other ideas?Since I didn't get any advice I tried re-installing snow leopard, except it tells me it can't change the contents of my hard drive. Any ideas?
-
Can't Connect to Home Network with X-Box 360 or PSP
I have a wireless WRT310N and I can connect to the internet just fine. Router connected to the modem all connected to my computer and phone line, but I cannont access wirelessly from my X-Box 360 wireless adapter or my PSP. I have everything set to automatic and the WPA code is correct and still no connection. I checked on the router's config and I can't find anything that could cause this. Anyone know how to fix this?
Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Xbox settings :-
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2) On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
ip address :- 192.168.1.20
subnet mask :- 255.255.255.0
default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live
You will definately be able to play the games wirelessly!!! -
My iphone suddenly can't connect to itune but my ipad can still connect.
my iphone suddenly can't connect to itune but my ipad can still connect. i am using window 7 and the latest itune.
Did a diagnostic test and this is the result.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite P850
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 772513C00B220A08
Current user is an administrator.
The current local date and time is 2015-01-29 01:18:49.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is not supported. (16002)
Video Display Information
NVIDIA, NVIDIA GeForce GT 630M
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26. Device is working properly.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D. Device is working properly.
Intel(R) USB 3.0 eXtensible Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano running firmware version 1.3.1
Serial Number: 7L******SZB
iPhone 4 (GSM) running firmware version 7.1.2
Serial Number: 68*****QA4S
iPad (3rd Generation) (Wi-Fi + Cellular) running firmware version 8.1.2
Serial Number: DYVH******GH
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
Suddenly can't connect to windows server
I suddenly can't connect to the windows server. The username and password is correct, but it says "Connection Failed: Unknown user, incorrect password, or login is disabled. Please retype the name and password or contact the server's administrator." It pings the server as well. My internet and email works fine. The IT guys can't figure it out either, but they are not mac gurus. Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information. I also tried connecting through the server alias under the network and its the connetion failed as going through Connnect to Server and entering it as AFP://ipaddress.
Can it be from the 10.4.11 update? It was fine before the update I believe - but I can't recall for sure. I'm a lone mac user in a very pc company, so any mac expert advice would be helpful.
Is just strange since I have no problems connecting to our work email via GroupWise.Connecting via smb comes back with "Could not connect to the server because the name or password is not correct" before I even enter login information, if that is helpful information.
Yes for any previous connection, Macs will send what's in Keychain Access, even if it's wrong, before you get asked... delete that reference in Keychain Access. -
Suddenly can't connect to music store
i suddenly can't connect to the music store. When I try to connect to the music store I get:
iTunes could not connect to the Music Store. The network connection was reset. Make sure your network connectionis active and try again.
I also haven't been able to connect to ichat. My internet is working. I can view websites and everything. I don't know what's going on or why. It's been going on for a couple days. I'd be grateful for any help!working!
-
Can I create a home network withous dsl connection with airport express
can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.
-
IPhone5 bluetooth can not connect to macbook air?
hi
my iPhone5 bluetooth can not connect to macbook air (mid 2012).
is bluetooth on iPhone 5 designed so that it CANT connect to computers?
thanksYes, BT on the iPhone only has profiles for hands-free, audio, tethering and control. It does not support file transfer profiles.
-
Itunes sudden can't connect with itunes store, error code 11556
Sudden can't connect with itues store, error code 11556
Try these discussions...
https://discussions.apple.com/message/18950811#18950811
https://discussions.apple.com/message/20057934#20057934
FRom the More Like This section on the right. -
my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page? Thanks, Shir
-
Am getting Routine error R6034. I can not open iTunes. Windows Vista Home 64 bit
For the first time,am getting a routine error R6034. Do not let open my iTunes, and possible lost all my contents. Why is this happening, is it nothing secure on the Internet no more even our music? Please I appreaciate any good help. I tried to r
-
My hard drive is about to fail. While I wait for the new to be delivered, I went to play my music. Its all gone! When I go into the music folder my itunes lib has damaged next to it? Any ideas on how to fix this? I have time machine so I'm not wo
-
Checkbox convertion problem in screen painter
Hi experts, I would like to convert an field from DD char 1 in checkbox in the screen painter but the field is locked in my screen painter. I can't conert it to checkbox or radiobutton. -> The field is from an enhancement of an standard IT. Is their
-
I have successfully installed the ATI driver with big desktop configuration. (on xorg 6.7) I'm using gnome as WM. With my previous gfxcard using xinerama, if I maximized a window, it would maximize on the monitor it is on. The big desktop of ATI (whi