HT4528 my iphone 4 just went blank and i have no visual power
my iphone 4 just went blank and i have no screen
You will need to put the phone in recovery mode, http://support.apple.com/kb/HT1808, you shouldn't loose any data the program will backup your iPhone first before the restore.
Similar Messages
-
My Phone Just went blank and wont do anything, what do i do?
My phone just went blank and wont do anything, please help!
Try a Reset
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
iPhone Reset
http://support.apple.com/kb/ht1430 -
My screen just went blank and is still on but the screen is not working what shall i do?
my screen just went blank and is still on but the screen is not working what shall i do?
Have you tried turning off the phone and then turning it on again?
-
My ipad just went blank and wont come back on, any help??
My IPad went blank and will not come back on. Is there a reset button or procedure??
Try resetting your iPad by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
HT1766 my iphone just went black and won't turn on what can I do?
Help! My iphone 3gs was working just fine. My granddaughter picked it up and jerked it out of the charger and it went black. I have tried pushing the home & power button together, going to itunes to restore and nothing helps. Can anyone help me with this? Thanks Terri
Did you try any of the reset steps, etc. outlined in some of these forums or pretty much do nothing until it started working again? Also, do you have an iPhone 4 as Sam The AMAZING does?
(I'm desperately grasping straws to figure out whether or not I've exasperated all options and my iPhone is lost forever...)
Thanks, L -
HT4528 My iphone just turned off and will not come back on. What do i do?
Why my phone just cut off and won't come back on?
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Macbook just went blank and not turning on.
I have a 2008 Macbook A1278. Last night I was browsing and suddenly my Macbook's screen went blank. My battery is not working so I tried turning off the Mac by holding the power button. Nothing seems to work and it doesn't turn on. I tried resetting the SMC by the steps provided on the support website but even that isn't working. Now when I turn on the Macbook I can feel it working but the display doesn't come and the white light doesn't come either at all. I tried going through every possible solution available online but nothing seems to work. Help is required. This Macbook of mine is very essential as I work on it.
Nothing seems to work and it doesn't turn on.
Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters
If it's not the adapter, might be something you haven't tried here > Troubleshooting: My computer won't turn on -
I went to use my phone and it won't turn on. I've tried reseting it by holding the home and the sleep/wake button but the apple icon never appears no matter how long I hold it. Also I tried plugging it into my computer and Itunes recognizes it but says it's in recovery mode and can't access a phone in recovery mode. How do I get it working again??
If your iPhone is in recovery mode, this means you need to restore your iPhone with iTunes.
Are you unable to restore or follow any prompts to restore when your iPhone is connected to iTunes?
http://support.apple.com/kb/ht1808 -
Phone just went blank and now won't turn on
I was using it fine, then I put it in my pocket and took it out about 10 minutes later and the screen was black. My friend rang my phone and it rang on hers but nothing happened on my phone. ps my home button doesn't work so i can't hold the home button and lock button down. Nothing happens when I plug it into the laptop as well. Please help me? Is the phone just dead?
I am having this same problem right now. I can not make phone calls. I can receive them. I can send and receive text messages and wi-fi / 3G work great. I sent my phone back to Apple and I've just been informed that they are returning it to me broken because of what they call accidental damage or misuse. My phone has never been dropped or damaged. It does not have a scratch on it. I have only ever downloaded software from the App Store and have never misused it. I started having problems right after I downloaded the latest OS update about a month ago. One day the screen froze up and wouldn't respond, so I had to do a complete reset. After that it wouldn't make calls. So, another 1 or 2 full resets, a 3 hour phone call to ATT and Apple, and FedExing my phone to them, I am now getting a broken phone returned to me and Apple telling me the warranty is void. How convenient for them. Ahhh, that wonderful customer service that they show to their loyal customers.
-
Please see subject
I had the same error, I took it in to a local repair shop and they had to disconnect the battery to shut it down, I was told it's an error with iOS 7.0.4 and I should not use my phone till apple releases the fix for the white screen, in the next OS update.
They have run tests on my phone and there is no hardware fault they could find.
None of my buttons worked when the white screen appeared so I couldn't restart either. So wait for the battery to die or pop in somewhere they can disconnect the battery, I hope this helps. -
HT4528 my iphone 5c screen just went blank I cant get it to come back on
my i phone 5c just went blank and I can't get the screen to show back up
Could be the battery is completely drained. Plug the phone into the charger that came with it and plug that into a known good wall outlet. Wait about an hour. Then while it is still plugged in reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If the phone restarts leave it plugged in to the charger until the battery is fully charged. -
my iphone 5 is blank and when connected to a power source flashes on an off with the apple logo, also my laptop is not picking the iphone up in itunes when i click on devices?
Try restarting the phone by holding the power buton and home buttion for 10 - 15 second
Apple logo should appears and your iTunes should detect the phone -
The calendar on my iPhone 42 suddenly went blank and says No Events. How do I get my data back?
I've been having the same problem every 3-4 months: the calendar app seems to hang up, I either reset the app/phone or wait it out, then presto! all internal calendar entries have been deleted. Unlike others in this thread and elsewhere, I am not using iCloud.
Interesting fact: while following the suggestion to hide all calendars, then show all calendars, I noticed that the internal calendar option is MISSING. It's like it just doesn't identify that there ever WAS an internal calendar. Really? Argh.
Apple Support: are you guys monitoring this? I've seen a few similar postings, so I don't think we're alone...
Granted, I have more than a few entries - years of calendar/appointment history have been imported from my old Palm Treo. Thanks to slow performance and odd calendar app crashes, I am very well aware that the iPhone's calendar isn't nearly up to the task of handling this many entries, and have been working to get the quantity of entries down. I must be up near some threshold, as response time seems to have improved with several deleted entries, though it was just before the crash+data loss.
Fortunately, I try to sync with my Outlook calendar nightly, so I do have a backup. However, this type of data loss and instability re VERY painful for those that actually USE and practically LIVE by their calendars. Here's hoping I can remember today's entry modifications...
One additional complaint: WHY can't I edit a recurring appointment WITHOUT it creating a NEW one? Crazy... For all the things this smartphone does well, it does several things VERY stupidly.
_Dave_ -
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
My Iphone 4 screen just went black and it wont come on but it vibrates on ringer. Ps: The home button doesn't work. What do I do!?
If it never worked after the screen replacement then it would appear that you have a hardware problem either caused by the repair or the problem that lead to the screen replacement.
Maybe you are looking for
-
Looking for a nice solution for different cases with nearly same operations
Hi everybody: I'm looking for a nice solution for the following problem: I'm measuring different data at the same time (with different devices). I would like to save these data all in one array (or cluster?), but I don't know exactly the way to do th
-
Java.rmi.MarshalException is thrown when we run JUnit TestCase
Hi, We wrote a JUnit TestCase to test our EJBs of our J2EE project. When we run the JUnit TestCase, we are facing Marshalling Exception. Our application development IDE is WSAD5.0 and it's JUnit jar's version is 3.8.1 But the application is running f
-
Cant Install Itunes to Windows 7 (Multiple Errors) Please help
so i keep trying to install itunes and i get these errors:
-
"Create Object " statement gives error: statement is not accessible
Hi All U must b doing good. I am new in ABAP Objects. I have writeen a simple Class definition n Implimentasion code. but whenever i write statement "Create object", it gives error. 'm working on SAP Dev 4.7. the code was like this:- class counter de
-
ISU Business Partner Master data Upload using BAPI?
Hi Experts, I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data. This BPAI is not uploading the following topics: 1. Communication Address like Telephone,extension, email and etc., are not uploading. 2. Middle name