HT4528 My phone turned black but able to receive calls because i know where to swipe to open it, it is fully charged, but black-tried holding down top, then tried holding top & round area. No luck!!

My phone turned black but able to receive calls because i know where to swipe to open it, it is fully charged, but black-tried holding down top, then tried holding top & round area. No luck!!

Make an appointment at the genius bar and have it evaluated.

Similar Messages

  • My phone turns on but turns off again when the apple logo come appears. What will I do? Please help.

    my phone turns on but turns off again when the apple logo come appears. What will I do? Please help.

    Try a reset:
    - hold the home button and sleep/wake button down at tyne same time
    - release both buttons when apple logo appears
    Does the issue occur when plugged into charge?
    If issue remains try a restore in recovery mode:
    If you can't update or restore your iOS device

  • Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again   I tried all but nothing, everything works except the call   I have an iPhone 4 Version 6.1.3

    every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
      I tried all but nothing, everything works except the call
      I have an iPhone 4 Version 6.1.3
    thank you for your help

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • Screen turns black and shuts down unexpectedly- help!

    screen turns black and shuts down unexpectedly- help!

    Try:
    iPod touch: Hardware troubleshooting
    iOS: Not responding or does not turn on

  • TS1365 My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking.

    My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking. How can I fix it?

    cooldedar wrote:
    I reconnected charger and the green light showing with blinking.
    Well the blinking light shows it's charging, however just to make sure.
    Reset the SMC, then connect the machine to a power source that doesn't have a lot of other power items on the same lines (in the walls) in the same room and see how it is in the morning.
    For instance use a powerline in another spare room that isn't being used as much.
    https://support.apple.com/kb/HT3964

  • I am suddenly unable to receive calls on my iPhone 4S.  Is it possible that the age of the phone will affect its ability to receive calls? HELP!

    I am suddenly unable to receive calls on my iPhone 4S. 
    I have spent 2 hour-long sessions with technical support and although they were very nice, it is still not fixed.
    When I try to call the phone from a land line, it doesn't ring AND it doesn't recognize that a call is coming in (no missed call) BUT if I leave a message, it records it.
    Is it possible that the age of the phone will affect its ability to receive calls?
    HELP!

        MarketingMary,
    I am truly sorry to hear that your are unable to receive calls on your device. Thank you tbo27 for providing great troubleshooting steps. Making sure call forwarding is not active by dial *73 is great. Have you already reset network settings also? http://vz.to/RTz70g Are you able to make calls fine? Make sure Do not Disturb is not active. Settings>Do Not Disturb
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • I just want to be able to print my pictures and know where to send my memory card.

    I just want to be able to print my pictures and know where to send my memory card.  HP Photosmart Plus, Windows 7

    please tell the complete printer name
    using memory card frm printer or computer
    if printing from computer go to my computer go to memory card or flash drive & acess the memory card & print the picture file that you would like to.  If you like to print frm printer put the memory card to approprite memory card slot & then select the picture to print it will work

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • HT4528 My Iphone5 turned black today while in school. I thought it was dead, so i charged it for 20 minutes but it didnt work. Ive tried turning it on. That dosent do anything either. Please Help

    My Iphone5 turned black today while in school. I thought it was dead, so i charged it for 20 minutes but it didnt work. Ive tried turning it on. That dosent do anything either. Please Help

    Like any other computer, the iPhone can sometimes have a weird glitch or hiccup.  It's part of technology.  As long as the reset gets you back up and running, then you're good to go.

  • Why is iPhone 6 able to receive calls but not MAKE calls?

    I can use apps, internet, and text and receive calls.But not make calls. 

    Is this a new phone?
    Are you a new customer?
    Did the phone ever make calls?

  • Why does my iMovie 11 sometimes turn black while replaying videos and then crash?

    After editing parts of my video i go to replay it and the video turns black. The mouse then changes to a multi-coloured spinning CD and Imovie exits. Please help me as this is stopping me from completing my video!
    Danielle

    Yes.  And, Apple needs to work on this.
    It is terrible because it is random and there is NO WAY to just select and get back the button or the choice.
    Come on Apple.
    Cheers,
    b

  • HT201328 iPhone 4 able to receive calls but not make calls

    Hey,
    I received a carrier unlock through AT&T. I restored my phone in itunes and received the "congratulation your iphone is now unlocked" message. I am currently living in Belgium and using the Mobistar network. I have bought several sim cards, and none of the sim cards will activate. I can receive calls but not place them. According to the mobostar representative, this is not even possible. I have restored the phone several times using different sim cards.
    Is there potentially a problem with the phone itself? Everything is showing as if it should work, but I am unable to fix the problem - as well as the service provider here cannot.
    -Al

    Have you tried these two:
    Toggle Airplane mode on and off. Wait five seconds between the on and off modes.
    Reset Network Settings. Tap Settings > General > Reset > Reset Network Settings.

  • My ipod wont turn on but will still hold a charge and power up when pluged in to power. What is wrong?

    My ipod wont turn on but will hold a charge and power up when pluged in to power. What is the problem?

    Try here:
    iOS: Not responding or does not turn on

  • Agent being able to receive calls from 2 queues

                      I have UCCX 7.1 Express enhanced.  I have a request to add a queue for a new phone number to ring into.  My issue is that the agents that will be answering it are in 2 seperate queues now. So I have queue 1 and queue2 now and they would both need to be able to answer calls from the new queue 3. I believe I can do this somehow through skills and I have found some info from a 3X and 5X guide but nothing for 7.1
    So I was thinking there must be a way to do this.
    Thank you

    So thanks every one!! I was able to create a script with 3 seperate queue's in it.  Then I created the queue's with the skill sets I had created and then I assigned a Agent to 2 of the Skill sets and no Resource Group. I was able to call into both numbers and both showed up in my logged in Agent. I was wondering though if there is any way to make those queues show seperatly in the reporting window of the Agent under "Contact Service queue Statistics" drop down?

  • I am not able to make call even i am able to received call

    Hay i am not able to making call even able to received

    try to cold boot your phone I experienced that before.

Maybe you are looking for

  • Populate Value B based on Value A in Web UI

    Hi Friends, I have requirement to populate a field value based on other field value. I have a view and it consist 2 context nodes. When User enters the value in field A ( context node A ), we need to populate the field B ( Context node B ). But the m

  • Standard COGS cannot be Transferred from Sales Order to Billing Document

    I did a test in current client with the following steps: Create Sales Order for Configurable Material -> Execute Sales Order Costing Run, marked and Saved the result via CK51 -> Create Prodcution Order for such Sales Order -> Confirm Prod Order -> Co

  • Big delay opening first image:  ?

    On opening first image, sniffer_gpu runs, takes 30-45 seconds to query the gpu.  Then it terminates, and Photohop goes into "not responding" mode for 30-45 sec.  After the first image, everything works fine.  PS6 extended, I7 cpu, 64-bit, 32 gb ram,

  • Flash element panel does not appear when Flash is selected in DW3

    In DW3 (Win7) After creating several slide shows using image viewer and months later when I want to edit the image viewer.. When I click on the flash slideshow that I created in image viewer in order to edit it and the Flash Elements panel does not a

  • Can't Publish to Web Gallery

    Hi! I have a slightly annoying problem. I am selecting an event in iphoto and then clicking publish to web gallery. A window pops up to say that I need to be logged in to .mac to use web gallery.... I have the option to login, learn more about .mac o