HT4528 My screen just went black.  How do I get it to come back on?

My screen just went black.  How do I get it to come back on?

Is your battery out of juice, have you tried charging it? If the battery is flat dead it may take a few minutes after plugging it in before the screen will show anything.

Similar Messages

  • My Iphone 4 screen just went black and it wont come on but it vibrates on ringer. Ps: The home button doesn't work. What do I do!?

    My Iphone 4 screen just went black and it wont come on but it vibrates on ringer. Ps: The home button doesn't work. What do I do!?

    If it never worked after the screen replacement then it would appear that you have a hardware problem either caused by the repair or the problem that lead to the screen replacement.

  • My screen just went black.  I hear people calling me, but I can't answer.  Has anyone experienced this?

    My screen just went black.  I can't use the phone.  Anyone run into this?  Thanks for any advice.  I can't call Verizon!

        Hello Betty1011
    I don't want you to have the black screen of death! Let's get this fixed! Please try this and retest:http://bit.ly/SUCCgl I would also recommend this: http://vz.to/1c8GjOV
    Please let me know if this helps.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • The background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black backgr

    the background behind my pages has turned black, how do i get it to go back to grey? i have switched between preview, normal, bleed, slug and presentation and closed and opened in design and it is still black. I can't imagine layouts with the black background please help!

    or maybe the interface has been set to Dark?
    Go to Preferences > Interface tab, choose Light from Color Theme dropdown on Apearance section (upper part of the window)

  • HT1462 The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    •  If you have not already done so, restart Mac and
        try again.  If the iSight still does not work, continue.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (are you certain that you
       used the correct "reset" procedure?), yours is most likely a
       hardware problem that will require a professional fix. 
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    • If you want to try one more thing on your own first,
      use Disk Utility to repair permissions.  Then
      download and apply the latest Combo Update for
      your OS.  Currently, the latest SL Combo is here:
        http://support.apple.com/kb/DL1399
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. 
    Message was edited by: EZ Jim

  • I dropped my iPad and the screen went blank.  I cannot get it to come back on.

    I dropped my ipad and the screen went blank.  I cannot get it to come back on.

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  If that does not work you need to take the iPad to an Apple store genius bar to have it evaluated by the technicians.

  • Ipad2 froze after trying to upgrade to ios6, how can i get it to come back on?

    ipad2 froze after trying to upgrade to ios6, , have a black blank screen. how can i get it to come back on?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I clicked on the 'blcok' tab that came up under a video, and the video is gone. how do I get it to come back?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/920872]]</blockquote>
    The tab that lets you block adds came up by a video and i clicked on it by accident. Now the all videos for that website are gone. How do I get them to come back?

    If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then check the settings for that site.

  • My iphone 4 screen just went black and will not come back on, I can connect it and charge it and it makes noise but no screen?

    What does it mean when your screen just goes black and will not turn back on? I can connect it to computer to charge and it recognizes it and charges it but no picture on screen.

    Hey Krkirst10,
    Thanks for the question. It sounds like you may have a hardware issue with your device, however let's try to isolate as much as possible to determine if that is so. To isolate the issue, follow the regular troubleshooting steps for power issues:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4. After at least 30 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • After upgrading from Mac 10.6 to 10.9, firefox creates new windows by an "expanding" animation instead of just appearing. How do I get the old behavior back?

    On Mac 10.6.8, when I create a new window by hitting command-N or going to the file menu, or if another page creates a new window, the new window just appears instantaneously. However, after upgrading to Mac 10.9.2, new windows appear by an "expanding" animation, which takes slightly longer than the old "appearing" behavior. (Other apps on my Mac do not exhibit the "expanding" behavior, only firefox.)
    Was this behavior intentional? How can I get the old behavior back?
    I am using Firefox 28.0.

    Hi __trout__,
    Go to the mac system preferences and click on Doc. There is a Minimize window using.... select the animation there.
    Hope this helps.

  • HT4623 during update ipad went dark and can't get it to come back - it is plugged in

    Help my ipad went dark when installing the last update.  The battery may not have been fully charged but it was plugged in.  It has been 3 hours now and can't get it to come back.

    It sounds to me like it's in recovery mode
    http://support.apple.com/kb/HT1808
    Basically it wants to be connected to a computer to fix itself via iTunes.

  • HT1349 there is power, but the screen just went black

    i have a mac pro that has power, but the screen went black. has anyone else had this problem?

    Hello Gail,
    It sounds like you can hear your Mac start up, but you do not see anything on the screen.  I definitely understand your concern with this.
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays.  I wasn't sure if you were using a Mac Pro or MacBook Pro from your post.  If you are using a Mac Pro, follow the steps for external displays, but if you're using a MacBook Pro, follow the steps for internal displays.  I recommend reviewing the full article, but this step specifically stands out to me for the issue you described:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the full article here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My I pad screen just went black for no reason and will not turn on again

    My I pad suddenly went black and will not come back on with the on/off button.has any one have an suggestion as to the cause.

    Firstly, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
    If that does nor work, more sure battery I charged and if it still does not work go den the route of putting your device ino are cover mode -
    http://support.apple.com/kb/ht4097
    http://support.apple.com/kb/HT1414

  • My screen just went black! It's still on and working, but no buttons work!

    I was listening to music while my phone was locked and continually pressed the home button (every couple of minutes or so) just to change the song, but never unlocked it. Then, it stopped letting me press the home button to view the screen. Now, the screen is totally black and nothing happens if i press the home button or any button at all. It's still on because i still hear the noise when people text or call me, but still the same black screen. I've tried charging it through the wall charger and even hooked it up to my computer, but still nothing. What can I do to fix this?

    Hi kb89,
    Try resetting the iPhone by holding the Sleep/Wake and Home buttons until you see an Apple on the screen, as described here: http://docs.info.apple.com/article.html?artnum=305743
    -Jason

  • My ipad is a little over 1 year old and screen just went black. It was fully charged. Any ideas?

    My ipad just went blank...any ideas on what I can do instead of taking for repairs. It's under 2 years old and was fully charged.

    Try resetting ...
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, try restoring..
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    edited by cs

Maybe you are looking for

  • How do i view photos in macbook pro, and while viewing how can i delete the unwanted photos with delete button?

    1 My questions are about viewing and managing photos from a folder. a. How do i view photos in macbook pro - i know the space bar thingy but does not help my purpose? b. While viewing how can i delete the unwanted photos with delete button? c. How ca

  • Help in a query

    Dear, I have a query bellow. Please, could you help me with searching only comments starting with K10//? I have a list of all delivery lists created 11-01-11 bellow a query and I would like to choose only delivery lists starting with e.g K10. SELECT

  • Pci scsi card

    can i put in a scsdi card in a hp touchsmart 520pc

  • Names in report painter

    Hi, Can anyone explain where & how the vendor name is mapped in report painter? I want to derive the vendor name in report S_AC0_52000888 (report:8A4-0012) from Name 3 & Name 4 which is updated in Vendor master. I have checked this report it has been

  • Find query technical name for a deleted query/workbook in the User Menu

    Hi, When a BEx workbook or BEx query is published in a role, people with that role will see the query / workbook in their user menu. It is possible to change the caption/title of the 'node' in the user menu so it does not necessarily have the same na