HT4528 Restore failed, Screen shows iTunes logo and USB cord

I tried to restore my iPhone with iTunes and a message popped up saying could not restore. When the phone turns on, the screen shows an iTunes logo, an up arrow, and a USB cord. I have tried restarting and it goes back to that screen.

Place the device in DFU mode then restore it.

Similar Messages

  • I updated itunes on my computer, itunes doesn't recognize and my phone will not come on. It's showing itunes logo and usb cord only. HELPPPPP

    I tried to update iphone 4 to the 5.1 version.  After installing on computer, connected to update phone. Phone will not come back on, showing itunes logo and usb cable.  Please help

    Hi ..
    Help here >  iOS: Unable to update or restore

  • Screen shows iTunes logo and USB cable and thats all its doing - how to reset? I neeed help!

    I just got my Iphone and all its doing is showing the USB cord Logo and the Ituns logo, I need help ASAP!

    http://support.apple.com/kb/HT1808

  • Atv shows itunes logo and usb cord

    My apple tv, when connected to the television, will only show an itunes icon with a usb cord.  I tried restoring by connecting it to the computer through a mini usb but I keep getting a message saying "There was a problem downloading the software for the Apple TV 'Apple TV'. The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again later." Don't know what else to do.

    Welcome to the Apple Community.
    Unfortunately many locations are currently experiencing update/restore .dmg server problems, even more unfortunately this has now been happening for over a week, the only thing I can suggest is to try again later. I have no idea whether an Applestore would be able to restore your Apple TV for you.

  • HT4528 My iphone is telling me I need to do a system restore and wont restart. Screen shows itunes logo and that is it. If I do this how can i avoid losing all my pictures videos etc?

    my i phone is telling me I need to do a restore. Screen shows itunes logo and thats it, even after turning off and on again.
    if  do this how can I avoid losing all my pictures videos etc?

    Pictures/Videos in your camera roll? If so, & not backed up or imported to your computer, they are gone. There's no supported way to recover them now.

  • HT1551 Have not used Apple tv for ages,plugged in light flashing,screen is showing iTunes logo and USB cable

    Plugged in my Apple tv to tv and light flashing non stop.Tv screen showing iTunes logo and USB cable.Not responding to anything

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • IPod Touch shows itunes logo and USB connector on the screen??

    Hi,
    I was trying to update the version of the software on my iPod Touch to V3. But it threw an error and after that it is not getting recognized by itunes. It only shows itunes logo and USB connector image on the ipod screen. How do i get the ipod workng again? plz help.

    try the suggestions in this KB.
    JGG

  • HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself

    iPAD shows itunes logo and usb cable with arrow after that it switch off itself

    If the Restore doesn't work, force your iPad into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • Iphone suddenly shows itunes logo and usb

    My iphone just showed the itunes logo and usb cord image, without having done anything. How can I recover pictures and data that were in the phone memory?

    Before you connect to your computer , if necessary in recovery mode iPhone and iPod touch: Unable to restore , copy the iphone backup folder to a safe place, in case you need the backup again.
    The location of the folder is here:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
    You backup contains pictures taken with the phone and your data and settings. More info here. iPhone and iPod touch: About backups
    So, in case your phone gets recognized by your computer, let it restore and use the latest backup to get your data and settings back.

  • While opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there

    while opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there

    It's in recovery mode. Plug it into your computer running iTunes and restore it.

  • Accidentally upgraded to ios 6.1.3 and now my iPhone shows an iTunes logo and usb cord. How to fix this?

    The first thing happened was an apple logo blinking on and off. tried pressing home and power button together then now it shows an iTunes logo and usb cord. Please help me!

    shut down the phone first.
    hold the Home button and then connect it to iTunes, keep pressing the home key till the time you see a message on iTunes saying 'itunes has detected a device in recovery mode'  click ok a,release home key and click on Restore 

  • Ipad shows itunes logo and usb

    my apple ipad shows itunes logo and usb.
    please help to resolve this issue.
    thanks
    navin

    If this a new iPad?  You need to connect your iPad to your computer via iTunes to set it up.  Make sure you have the latest version of iTunes on your computer. 

  • TS1702 cannot restore the phone on the screen just show itunes logo and USB cable

    cannot restore the phone while trying to download the ios 6
    the screen shows only itunes logo and USB cable

    plug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:

  • Software update failure, now phone frozen. Now screen only showing itunes logo and USB Cable on screen. Have I lost my backup?

    I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
    Have I lost all the data on my phone?
    What should I do?
    Help!
    M

    The iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    For the 3004 error code does the troubleshooting for it on the page that you posted from not help ?

  • TS3694 Ipad  locked up when doing iOS upgrade .  Screen shows iTunes logo and connector    . Any suggestions on how to reboot/ restart

    iPad locks up when doing iOS upgrade. Screen shows iTunes icon and connector. System will not power up or restart. Any ideas?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • How do I use existing TM backup with upgraded Airport Extreme?

    I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it

  • Sending PDF file through PI

    hi all, I followed one blog to create PDF file using file adapter and custom adapter module  : http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1540235550DB11887853428651970314End?blog=/pub/wlg/14363 As per this blog ,, my processing

  • Converting analog 5.1 (multiple cables) to Digital DIN (for Inspire 5700), how?

    Hi, So far I've been using my Inspire 5.1 Digital 5700 speaker system together with my Audigy Platinum in my Desktop PC to watch DVDs and play games with a 5.1 experience. To connect soundcard and Speaker system, I used the provided Digital DIN cable

  • Can I have two iPhoto libraries open simultaneously?

    I have four different iPhoto libraries and one is corrupted.  Parts of it are still intact so I want to clean up the corrupted library and also remove the duplicates among my four libraries.  Is there a way to have two libraries open at the same time

  • File Browser Gone?

    As I said in another topic, I've just installed version 4 after using version 2 for some time. Version 2 has a very helpful file browser - that seems to be missing in version 4, replaced, I fear, with the Organizer, which takes a long time to load an