HT4539 Is there any way to auto-start the Apple mail app?
Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.
And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.
Similar Messages
-
I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?
Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances) -
Is there any way I can remove the Junk mail tab from OSX Mavericks
I just don't like seeing it
1. How would I go abouts doing that?
2. There is no hide button. -
Is there any way to turn off the auto formatting in Pages? I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to. But NO! Pages keeps changing the font size! I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size! I am getting SO FRUSTRATED! I've spent over an hour trying to get the stupid program to let me just type my letter! Can anyone help?
The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
You're welcome Rich. Glad to help.
Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
Mahalo for the and Aloha from Big Island. -
Is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?
is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?
Ziatron wrote:
With Snow Leopard if you delete a file (put it the trash) and then do a secure delete it's gone.
The OP is adressing SSD's in particular. Neither Snow Leopard nor Lion have the ability to secure erase an SSD of a single file by user action. This because SSD's write data in pages, but can only delete in blocks. Secure emptying of the trash on an SSD is no different than a non-secure erase, as the controller will not permit erasure of blocks until the entire block is freed, which is almost never the case with even group file deletion. Erasure is simply the re-writing of the "allocation table" that the pages are no longer in use.
SSD's are only rendered "erased" of previous data after an indeterminate period of use, and re-use that would eventually free blocks for re-write, and then actually over-written.
TRIM helps speed this process, but does not alleviate the block versus page issue.
Some additional info. -
Is there any way to hook into the SQL report pagination process?
I have a SQL report (based on EMP) with a radiogroup row selector.
The scenario 1 and 2 are in place
1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
Info (radio Group) Employee No Name
(+) 7369 SMITH
() 7499 ALLEN
() 7521 WARD
P900007_JOB CLERK
1-3 Next>
Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
What I require is on pagination some sort of mechanism to either
a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
b) OR blank out the additional text item P900007_JOB.
Is there any way to hook into the pagination process?
I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
Details of my page
Report Region (Based on EMP table) – radio group as a row selector
select APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
ENAME,
JOB
from EMP
Report Attributes -
Report template :- P900007_ROWTEMPLATE (custom template see later)
Report Attributes Substitution :- id="emp_report" (used in page_init see later)
Enable Partial Page Refresh :- Yes
Columns – All columns are selected as show but job is left out of the template below.
P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
P900007_ROWTEMPLATE (named column row template)
Row template 1
<tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
<td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
<td class="t15data">#EMPNO# </td>
<td class="t15data">#ENAME# </td>
</tr>
Before rows
<table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
<th class="t15header" #ALIGNMENT# >Info</th>
<th class="t15header" #ALIGNMENT# >Employee Number</th>
<th class="t15header" #ALIGNMENT# >Name</th>
After Rows
<tr>
<td colspan="99" class="t15afterrows">
<span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
<table style="float:right;text-align:right;" summary="pagination">
#PAGINATION#</table>
</td>
</tr>
</table>
*Javascript in page Header*
<script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">
<!--
function selectRow(pJob)
/* console.log('pete got here!'+pJob)*/
$x('P900007_JOB').value =pJob;
/* Start Page init*/
function *page_init*()
/* Used to set radio groups on reports */
/*console.log('START pete got here!');*/
var is_checked = false;
var l_check = $x_FormItems($x('emp_report'), 'radio');
/*Loop and set flag if checked*/
for(var i=0,len=l_check.length;i<len;i++)
if(l_check.checked){
is_checked = true;
/*end loop*/
/*If none checked force a click*/
if(!is_checked){
/*no longer need as doing click below*/
l_check[0].checked=true;
/*Force a click on the first radio group - extra details should then be
populated*/
var l_click = l_check[0].click();
/* console.log('END pete got here!');*/
/*END page_init*/
// -->
</script>
*Application shared component.* – This fires a DB packaged procedure when the page is loaded.
P330_PART_NO_HIST
Process Point On load after Body region
Process Text show_hide_memory.part_no_history_details();
*Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
PROCEDURE part_no_history_details AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('<!--' || CHR(10));
htp.prn('page_init();'|| CHR(10));
htp.prn('//-->' || CHR(10));
htp.prn('</script>' || CHR(10));
END part_no_history_details;
Thanks Pete
Edited by: Pete @ LSC on 26-Jan-2010 06:56Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete -
is there any way i can get the data from the phone?
Hi webby84,
Welcome to Apple Support Communities.
It sounds like you're experiencing a hardware issue with your iPhone.
These links are a good starting point for troubleshooting:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy -
Is There Any Way to Add Back the Sidebar in 12.01?
Is there any way to add back the sidebar in iTunes 12.01 like there was in iTunes 11?
Thanks. It appears that the sidebar appears only when I click on the Playlists option under whatever item I've selected. If I have a device connected, it shows up in the bar that starts with music, movies, and TV shows. If I think click on Playlists, the device appears in the sidebar too like it used to.
-
I have an i mac early 2008 10. 8. 2 mountain lion. Is there any way i can do the mirroring to my apple tv/ tv?
Not natively. That requires the newer processor. You will have to use Airparrot
http://airparrot.com/ -
My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop
The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.
-
Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud
Is there any way of saving progress in a game/app when you remove it from the ipad to the cloud.
Basically i have a 16gb ipad2 (big mistake) so space on the ipad is precious. obviously i occasionally need to remove games/apps to make way for other apps from my cloud. The problem is, when I remove an app to make way for the new app I lose all my progress in that game apart from the option to save leader-board stats (which is the least important thing to me). Its very annoying to get so far in a game only to have to remove it to make way for a movie and lose all my progress!!!!!
Any way round this?I do not know how to save game data when deleting an app, but as for updating, if you connect the ipad to a computer and do the update through itunes, you will not have to download the update package to the ipad just to the computer. so you don't have to free up quite so much space, as for movie and photo storage you can look at the sandisk wireless and airstash wireless SD card adapters, they create their own wireless network and come with apps that allow you to store and then stream movies to the ipad instead of loading them to the ipad storage.
http://www.airstash.com/
http://www.sandisk.com/products/wireless/media-drive/ -
Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
Thanks in advance!
MattI've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
Matt -
I deleted emails from VIPs in Apple Mail and didn't realise they would be deleted from my Mailbox. I have tried to restore from Time Machine but VIPs doesn't appear. Is there any way I can retrieve the deleted emails? I also have bachups on an external hard drive.
I have OS X 10.9.2You can't download pictures from iCloud by logging into icloud.com. If you deleted pictures from camera roll AND photo stream, the only possibility is preforming a restore from an iCloud backup, assuming the backup has the pictures in it. (Many users have been unable to restore and get back their pictures.)
If the restore doesn't have all the pictures, then they are gone.
In the future, use photo stream to sync photos from an iPhone to a computer, then copy the photos on the computer from the photo stream album into a permanent album. Photo stream pics stay there only for 30 days, and only up to 1000 photos are stored. Don't use photo stream as a storage medium, it's only for copying photos from one device to another. Always copy (either via USB cable or photo stream) to a computer and then move to an album. -
Is there any way to edit all the transitions in a project at the same time?
I chose "insert with transition" when adding clips to my timeline, but the default is set for one second, which is longer than I'd like. I know how to change the duration of each transition one at a time, but is there any way to select all the transitions (there's about 90 of them) and adjust the duration for all of them at the same time?
That's my main question, but I also would like to change the default cross-dissolve transition to be 15 frames instead of 30 for future projects. Anybody know if I can do that? I know I can create a 15 frame cross-dissolve and make it a "favorite", but it seems it would just be easier to change the default one instead.
Thanks,
StephanieI know I can create a 15 frame cross-dissolve and make it a "favorite", but it >seems it would just be easier to change the default one instead.
That's your only choice using FCE.
Al -
I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and the os will only run 10.4.11, consequently iTunes will only upgrade to 9.2.1(4). Please don't answer that i need to upgrade the computer os because that has been a past nightmare i have been through too many times.
Is there any way i can upgrade the phone w/o going to an apple store so hereafter w/ the upgrade to the new os (whenever that gets squared away), i will not need a computer to do it?
Thanks in advance,
donSolved my issue by setting up a new account on my daughter's computer. Not 100% solved, but i was able to get the update on my 3GS.
don
Maybe you are looking for
-
Error while updatig SAP Component Repository in SLD
We are getting the following error while updatig SAP Component Repository in SLD: "The import history of the target namespace could not be determined". We are in the middle of updating SAP CR in SLD from version 2.0 to version 3.0. Before updating CR
-
Monitor image reduced to bright vertical line
I have a 10 month old Sun PN21MS monitor. It was in power save mode all weekend, and when I "woke up" the computer this morning, I only got a single bright vertical line on the display, instead of the normal image. Power cycling restored a normal ima
-
CUPS History not being cleared
We are running 8.5.1 across the board except CUPS, which is 8.5.3. We are running into an issue where users whose accounts have been disabled in AD, and their phone extensions assigned to another user are still showing up on the CUPC call display, or
-
Private Whois for ".us" domain names : Impossible?
I'm trying to register a ".us" domain name with private whois (ie, masked registrar info). Both GoDaddy.com and NetworkSolutions.com have confirmed to me in email that they do not offer Private Whois for ".us" extensions. Am I wasting my time looking
-
My App Store has frozen on a screen. How do I unlock ?
My ipad has frozen on a screen in App Store What can I do?