HT4539 My 8gig 4th generation Ipod wont download Icloud , whats the problem?

My 8gig 4th generation Ipod wont download Icloud , whats the problem?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • Can a 4th generation iPod Touch be connected to the Pantec Impact via Bluetooth?

    Can a 4th generation iPod Touch be connected to the Pantec Impact via Bluetooth? They see each other but when they are told to pair or connect it fails. Both have been tried with headsets and both connect fine. Both have the most recent software updates available.

    You mean the PAN profile, which is supported by the iPod touch according to the chart?
    But looking into more detail on bluetooth and of what profiles my phone supports it looks like iPod uses PAN, while my phone uses DUN for tethering.
    http://www.phonescoop.com/phones/phone.php?p=2260

  • Ok I just recently bought an album on itunes, the songs arent showing up anywhere, but when i go into the purchased section on itunes it says "downloaded". Whats the problem?

    Ok I just recently bought an album on itunes, the songs arent showing up anywhere, when i go into the purchased section on itunes it says "downloaded". Whats the problem?

    Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
    Then test to see if it solved the problem.

  • My 4th generation ipod nano is stuck on the apple screen even after i reset it

    My 4th generation ipod nano (the nano chromatic) is stu ck on the apple screen, i tried to restore it by putting it in disk mode like apple support stated but its not showing as connected in iTunes, everytime i reset it, it just shows me the apple logo and nothing else, my warranty has long expired and i need my ipod so please help !

    I assume by a reset you mean holding both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear correct?  Keep in mind this may take a number of tries.
    If that doesn't work, try connecting your iPod touch to your iTunes library in Restore Mode using the instructions from this Apple support document.
    http://support.apple.com/kb/HT1808
    B-rock

  • My macbook pro went blank and wont come on, whats the problem

    my macbook pro went blank and wont come on, whats the problem

    Hello ristaformal,
    The following article details a number of steps that can be taken in order to bring your MacBook Pro back to a working state.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Cheers,
    Allen

  • My 4th generation ipod wont update without deleting all of my Media. I dont want to do that. What do I do?

    I have a 4th generation 64 gb iPod Touch. I had a laptop that it was synced with but it crashed. Everytime I try to update it pops up a messege saying "Erase all media and update". I do not want to do that. It wont even let me put more music on it. Im not sure what to do..Im scared because its a 64gb iPod i love it to death. It is all I own. How can I put music on it without deleting all of my media. Or where can I store all the media to restore later?

    I realize that, but I was just updating to the most recent software when I got an error message & now it's just showing I need to restore. Is there a way to back it up first or avoid the resetting to factory?

  • 4th generation ipod wont let me sink apps, they show on the computer

    The apps show on the computer, but wont snyc to i pod after I did updates today.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Why is my 4th generation iPod Shuffle not recognised by the new Itunes 11?

    Made the old mistake of "upgrading", this time to iTunes 11. I'm sure it is all very exciting and pretty and what have you, but as I can no longer see my device in iTunes it is all pretty pointless. Anyone else having this? Any solutions out there (as reverting to previous iTunes is, of course, a no-go - so double thanks, Apple!).

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • When I connect my iPAD to my PC it no longer automatically opens the IPAD device window to allow me to sync. It works ok for my iPOD so not sure what the problem is?.

    When I connect my iPAD to my PC it no longer opens it at  as device in itunes.
    This has worked in the past.
    I don't have problems with my old iPOD. That is recognised and syncs ok.
    Also, the PC recognises the iPAD as a drive  so I'm not sure why it doesn't open it in itunes... Very frustrating.

    Thanks, this helped. THere was a new version of iTunes I downloaded to my PC and now the iPad is recognized.
    The problem now is that I get the message that I cannot backup my iPad as my PC is not authorised, even though when I click to authorize it says my PC is already authorized.
    I will click through the forum to see if there is an answert to this.

  • HT4623 My ipad seems to download fine on everything except my mail it won't download it  whats the problem

    My iPad seems to download fine on everything except my mail. It just gets stuck in download mode. What's the problem?

    Hi Vickie2014,
    Thanks for visiting Apple Support Communities.
    It sounds like your iPad may not be receiving email messages properly. The troubleshooting steps in this article can help with troubleshooting email on your iPad:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Best Regards,
    Jeremy

  • HT1727 the computer my itunes were on completely crashed. i rebuilt my files on a new computer but my 4th generation ipod will not sync with the new library. what can i do to have the two devices work together again?

    the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?

    Follow the steps given here…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do i use panorama on the 4th generation ipod?

    i saw it said that the ipod touch gets the panorama mode but does anyone know if does work with 4th generation ipod touch?

    No, just the iPhone 5, 4S, and the iPod touch 5

  • I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

    I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
    "The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
    I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
    Any advice very much appreciated.
    Thank you
    UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I have a 4th generation ipod touch and I want to move my itunes library to a different computer, can I just download itunes or will my ipod software be too old?

    Can I just download the newest itunes and still have my 4th generation ipod work with it?

    Download iTunes on the new computer and then:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

    My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • 6300 questions

    hello thanks in advance for any help that i get i recently purchased a 6300 and have a few questions about it. the battery is lasting not long, could this be due to i didnt give it a full charge before i used it? also on the main screen i was wonderi

  • Why has drag and drop in mail stopped working

    Drag and drop has only stopped working in Mail, it is still functioning in other programs.

  • Devede only works as root

    Hey, When trying to use Devede, I can only get it working when using the root account. When using a regular account, I get "There was an error with the file, file doesn't seem to be a video file". I guessed this has something to do with the group spe

  • Cache not synchronized between portal nodes

    Hello. We are having a problem with a service using a cache api (com.sapportals.wcm.util.cache.ICache from bc.sf.service.cache_api.jar). The problem is fairly hard to describe, so bear with me (long description) Environment (+applications) descriptio

  • What should I do when I can't import mp3 audio files into my Flash library?

    Hi! I am currently working on a flash animation title sequence but for some strange reason I am unable to import the mp3 audio into my flash library.  I keep getting an error message stating that it can not import.  Signed, Confused animator ZagonGir