HT4559 I message not working

My iMessage is not working. My messages do not show up on my iPad.

About iMessages
http://support.apple.com/kb/HT3529
Troubleshooting Messages
http://support.apple.com/kb/TS2755

Similar Messages

[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Revision: 16395
Revision: 16395
Author:   [email protected]
Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

HT5012 Update my iPad to ios7.1 and messaging not working .......suggestions?

Updated my iPad Air to ios7.1. Messaging not working. Suggestions????

What happens when you try? Getting an error message?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

I have a 3gen iPod message not working any solutions

I have a 3 gen iPod messages not working any solution

Start here:
iOS: Not responding or does not turn on
You are not really giving ups much information to provide more detailed advice.

Anyone's I Message not working this morning?

Is your I Message not working this morning?

I've been using mine all morning.
https://www.apple.com/support/systemstatus/

IOS Group Messaging not working when Android phones are involved

Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

Hey geoff_zen,
Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

E7 Nokia Messaging not working after anna update

hi
nokia messaging not working after anna update. when i
-choose provider (hotmail/gmail/yahoo...etc)
-enter username & password
-click OK to T&C
-get error message: "cannot enable this service on the device"
any ideas?

I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

Text messaging not working on my BB curve 8530

My husband is on the same plan as me, but he has an android phone. I can send and receive text messages from him and myself, however, I can not send or receive text messages from anyone else. I've taken the battery out, updated my phone profile through the blackberry network and don't several other trouble shooting methods.
When I send a text it says that it goes through. When I got my phone I started texting my friends and family and received no response, thinking that everyone was just busy. When I talked to them later they said they never received anything and like wise, they sent me texts that I had not received as well.
I'm on Virgin Mobile and have called them several times now. The first person said that it should be working in 2-4 hours and that he would call me back. 4 hours later, It was not only still not working, but he had never called me back. The next person I called had me do all the trouble shooting that I had already done and then he told me it should be working in an hour. Three hours later it was still not working so I called again, this time I spoke to a lady that had me do all the trouble shooting again and said that she fixed it.. over the phone I texted google to be sure, and sure enough .. STILL DID NOT WORK. She said "oh.. well.. you need to talk to one of our blackberry specialists". After forwarding me to someone, he had me trouble shoot again... He said it should be working in 30-72 hours and that it was a problem with the blackberry network. I'm not sure I should wait 72 hours for it to work... especially when in the past they haven't called me back.
1.) I can still make phone calls
2.) I can text my husband and can receive texts from him
3.) I can access the internet and download and upload files
There is no indication on my phone that the texts are not going through, I get that little check mark by my text messages and everything looks normal.
Is this a simple fix? Is everyone experiencing this problem?

Hello !
Do you have activated BlackBerry Internet Service (BIS) Plan on your device?
Kindly check with your service provider.
And if it is activated, then does your plan cover to use any other messenger like Yahoo, Gtalk etc or not.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

SAVE_TEXT for long error Message not working.

Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline   = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT   = 'DOKU'.
Header-TDNAME     = 'ZFQM093'.
Header-TDID       = 'NA'.
Header-TDSPRAS    = 'EN'.
Header-TDFORM     = 'S_DOCU_SHOW'.
Header-TDSTYLE    = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
     CLIENT                = SY-MANDT
      header                = header
     INSERT                = 'X'
tables
      lines                 = t_lines
   EXCEPTIONS
     ID                    = 1
     LANGUAGE              = 2
     NAME                  = 3
     OBJECT                = 4
     OTHERS                = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
   OBJECT                = 'DOKU'
   NAME                  = 'ZFQM093'
   ID                    = 'NA'
   LANGUAGE              = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C'    'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT       = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
Akash

Hi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
                   and we have to manually save it, but i want to save the text automaticaly
                   all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash

Messages not working after 10.9.2 upgrade - XPCIMDMessageStoreSendXPCMessage fails

I have upgraded five machines to 10.9.2, but one of them has run into a persistent problem with messages.
On startup, I get a Message that an internal error has ocurred and asks me to relaunch. After that the window comes up and the acount window shows me logged in, but the history is not updated and new messages take forever to deliver or do not go through at all. They usually do not update on the local display.
The console log shows lot of failures like these:
- 2/27/14 6:33:44.954 PM imagent[371]: [Warning] __XPCIMDMessageStoreSendXPCMessage failed too many times...bailing!
I have set up another account and tried logging in from it, but it shows the same behavior.
The firewall is off, certificate seem to be fine. When I log out and back in, the other systems devices get all the nag messages about the system and numbers being added, so it is communicating with the server. But messages are not coming through.
I have cleared all preferences and caches, but the behavior does not change.
I have reverted the system to 10.9 by installing over it. Messages immediately works fine (same preferences etc.) Everything works great, but I'd rather not live with the SSL bug.
I have upgraded using the Combo Update and another time using the App Store. The behavior stays the same.
The other four machines and my 4 iOS devices are all working as expected.
Does anybody have any ideas? My family and friends use Messages a lot, so I need it on my main machine.
Thanks,
-- Harald

Hi,
I will presume again then.
I would also try these one at a time. Doing it this way is less invasive than doing them altogether.
The Console Message looks more like it belongs to an iMessage sending than an AIM, Jabber or Yahoo ones.
In this case I would try deleting com.apple.imessages.bag.plist
This is not the Account info for iMessages but it is the server the app (and IMAgent) connect to.
If that does not work I would try the iMessages account one (com.apple.ids.service.com.apple.madrid.plist)
This is the one in use in Mavericks.
You may still have the Mountain Lion one present (com.apple.imservice.iMessage.plist)
You could try using Activity Monitor to Force Quit IMAgent but you first need to turn Off FaceTime even if it is not open (IMAgent does it's "Listening" as well as for the Messages app.
It goes without saying the Messages app should also be Quit.
I would again restart the computer when Quit the IMAgent app.
7:22 pm Saturday; March 1, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Group Messages Not Working between Android and iPhone Users on iOS7

Hi there,
I am a former iPhone user. I recently converted both my line and my wife's line from the IPhone 5 to a Motorola X Android phone. We kept our same phone numbers, but we completely switched from Verizon to AT&T. I have noticed that text messaging works perfectly on an individual basis when I correspond with individuals who have the iPhone, but Group Messaging is not working correctly. I am able to send messages to a group and they receive them just fine, but when they respond back to me, I do not receive their responses (as it appears they are going through as iMessages). My wife is having the same issue on her phone. After doing some detective work, I have found that hundreds of other users are having the same issues on their smartphones when they make the switch from an Apple product to an Android phone. There are a variety of "bug fixes" listed on the web, but I have completed all of them and I am still having the same issue. Here is what I have done so far...
*Factory reset both of our phones and removed the SIM cards (since we are with a new phone carrier)
*Changed both of our apple ID passwords
*Removed both of our phone numbers from Apple's database all together
*Unregistered both of our iPhone products with Apple
*Had all of my friends/family switch SMS to "On" in their Settings tab
So now what? I read one post on an Apple forum that said that they are aware of the issue and we can expect a fix in a future iOS update...but when is that going to occur, if at all? It is problems like these that led me to leave Apple all together, and here I am after having left the company, and I am still left high and dry searching for solutions to my problems. Who can help, and how can I remedy the situation?
Anything you can provide to help out would be great.
Thanks.

There are reports of iOS7 altering the settings on iMessage's connection to the iPhone. Verify that each of the iPhone and the Mac is receiving on the "channel" (phone number or email address) on which the other is initiating iMessages.

Text Messaging Not Working

Salient points:
I'm using a brand new Droid Pro. This phone was provided by ProtectCell after my two-month-old phone experienced a cracked display. It is new, not factory refurbished. My service was working perfectly on my imperfect other phone. (Texts were being received and sent with no problems, it was reading them that was a problem, due to the faulty display.) I took the new phone to the Verizon Wireless store to have it activated and my contacts transferred. I have not been able to send or receive text messages on the new phone. I tried restarting the phone, then removing the battery, and when those didn't work I called customer service and was told there were no network issues in the area, and that my plan correctly showed unlimited texting. They were unable to transfer me to Technical Support because I had no other device on which to speak while troubleshooting. I was advised to try *228 in case of a programming error. That didn't work. I have made sure that my phone is running the most recent updates. I've even downloaded Handcent in case it was an issue with the included software, but it seems SMS is not working at all on this phone. I've verified that people are unable to send text messages to me, and that I am still able to call out and receive calls, so I know that the SMS is the only affected service. I don't know what else to try, or what I have missed, or if my wonderful new replacement phone is faulty out of the gate. Please help, before I tear out my hair.

Lothruin, I am sorry your text messaging isn't working. I understand how frustrating this is and would like to assist you as best as I can. From your post, I show you have performed a lot of the trouble shooting steps we would have performed. The last step would be to ensure your provisioned correctly on your account for text messaging. This will involve speaking with you on an alternate phone. YOu may send me a private message with your name a alternate contact number to discuss and trouble-shoot your issue in more detail.

Recordsets per Message not working

I found that Recordsets per Message will split the source message into multiple messages and process them separately. This will save my alot of time and is exactly what I need - but it does not work.
I have in my sender file adapter the following parameters in File Content conversion:
Document Name = MT_SND_ZADIG
Document Namespace = urn://federalmogul.com/ADP/FINFRADP001/00
Recordset Name = RECORDSET
Recordset Structure = RECORDSET,*
Recordset Sequence = Ascending
Recordsets per Message = 10
Key Field Type = String (case-sensitive)
RECORDSET.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
RECORDSET.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
RECORDSET.lastFieldsOptional yes
When I feed in a file with 77 records I would expect it to split it into 7 * 10 recordset and then 1 * 7 - why is it not doing this?

Hi Lynn,
And... what is the result you are getting?
Try to change Recordset Structure with something different that Recorset name.
Something like:
Recordset Name = RECORDSET
Recordset Structure = row,*
row.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
row.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
row.lastFieldsOptional yes
Follow the example is described in:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Carlos

I message not working on ios 7

I have upgarded to ios 7 and my i message isnt working, when i go to turn it on it asks me to log in to apple acc, which i do and it wont accept my details, i have tried logging into my apple acc via app store and it works fine, i have also logged out of my acc and logged back in fine so i know that the details are correct.
anyone know what else i can try please.
Thanks

I have just read this a second ago so I will advice you the same, you could maybe think about going to get an appointment at your closest Apple store because I am not sure many people know how to fix this, they will probobly swap your iphone in for a new Iphone 5

Group Message not working iPhone 6/ iOS 8

I am not able to receive group messages after I updated to iOS 8.0.2 I just activated my iPhone 6 about 3 weeks ago (Before the Apple pay update). It was working fine until I updated the software with the Apple Pay. Initially I thought ALL the group messages are not working. After few trials I realized it was only the case when the group included both iPhone and non-iPhone users. Groups with ALL iPhone users is working fine.
I have checked everything possible, but nothing works.
- Turned off-on iMessages
- Turned off-on Group messages
- Reset Network Setting
- Erased and Reset the Entire phone from Phone settings (Now operating on iOS8.1)- still not working
- Called my carrier and they didn't seem to understand why I was having this problem
I then spoke with Apple Support who ran few diagnostic tests and they didn't find anything. They suggested that I re-set the phone to brand new phone (with out iCloud back-up) via iTunes (not from phone settings) and see if that will fix this. I will try this later tonight and see if I have any luck.
I tried telling customer service that I want to return my phone and get a new one- but they seemed to keep me away from that option.
Has anyone else experienced this? If so, any suggestions?

Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support
iOS: Troubleshooting Messages - Apple Support

HT4559 I message not working

Similar Messages

Maybe you are looking for