HT4597 My mail has suddenly stopped working.

I changed over to icloud a few weeks back and my mail (application) was working fine. All good.
As of today, my mail (app) account now keeps rejecting my password - although if I log into icloud, my mail is fine.
I've tried setting up a new account but it rejects this.
My incoming mail server is listed as mail.me.com

Welcome to the Apple community.
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

Similar Messages

  • TS3276 my e mail has suddenly stopped working

    my e mail suddenly stopped working , having been receiving messages all morning

    Maybe this thread will help. You can also look at other threads with the same problem by using the "More Like This" box.
    https://discussions.apple.com/message/19949268#19949268
    I hope this helps.

  • HT4623 My voice mail has suddenly stopped working. A caller just hears ringing for a long tome and then it disconnects. Does anyone know how to get it back or how VM stopped working? Thanks.

    Hi everyone. My voicemail just stopped working. A caller today said they got a message that it was not activated or something like that. When I called it from another phone all I got was ringing for a long time and then a disconnect. I have had this phone for about three months and it has been working until now.
    I updated software and turned the phone off and on again. Any other suggestions? Thanks.
    Joan

    Jneklason wrote:
    ~snip~
    I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
    On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
    I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
    I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

  • Push Mail has suddenly stopped working?

    Hi there,
    I purchased my new 5S last Thursday (15th) and set up a new iCloud E-Mail account at the same time. I then proceeded to transfer all my accounts, Facebook ect onto the new E-Mail address. I also set up iCloud on Windows 8 Mail so I would recieve push notifications of new mail.
    The other day I had to reset my laptop back to Windows 7, and on doing so it seems to have messed up Push with my iCloud account. My phone will no longer get push E-Mails and I have to go into the app itself to get E-Mail. I have removed the account, re-added it, reset the device, multiple things. Push is enabled obviously, and I am really at a loss as to what the issue is. Please help!

    Have you tried accessing your email account via a browser to see if your provided might be performing maintenance ?
    If not then you could try closing the Mail app completely and then see if it works when you re-open it : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Another option is try switching the account off and on in settings : Settings > Mail, Contacts, Calendars , then tap the account on the right and slide/tap Mail to off (it will be Account if it's a pop account ) , tap 'Done' and exit settings and then go back in and slide/tap it back on

  • My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    Try resetting the Yahoo password. Yahoo not infrequently has problems.

  • My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

    I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

    Did you tried uninstalling and then installing it again?
    Ankush

  • I just brought my MacPro in for service and they replaced my hard drive. However, now my disc drive has suddenly stopped working! Is there anything I can do to fix this without having to take it back in for service, again!?

    The nearest service center is 2 hours from my house and my computer isn't under warranty anymore, so I need alternative options. I'm just frustrated that my disc drive was totally fine until AFTER I took it in for service. I just paid a lot of money for a new hard drive from the apple store and now my disc drive has suddenly stopped working correctly. I tried with multiple CD's and DVD's...loading a disc, but my computer would just make a weird loading noise and then eject the discs. Now it has started fighting taking the disc, so I have stopped trying. Is there anyway to fix this problem without taking it in for service again and paying another boat load of money?
    Thanks in advance for your help!

    ShelbyMackenzieLynne,
    when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
    When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
    Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
    Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro.

  • My 12 year old Canoscan 8800f has suddenly stopped working.

    My 12 year old Canoscan 8800f has suddenly stopped working. When I press the power button a light comes on inside, but after a bit of whiring it goes out and the scanner switches off. Is there a solution or should I buy a new scanner?
    Solved!
    Go to Solution.

    I would still get a new one.  They aren't too expensive and they have added a lot of features such as LED bulbs and instant on.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • My edit page in in elements 9 has suddenly stopped working. How can I get it to the workspace?

    My edit page in in elements 9 has suddenly stopped working after over a year. How can I get  the workspace to open?

    You can try Restoring it in iTunes. If that doesn't work you will need to get it serviced.

  • Adobe Photoshop CS5 extended. The liquify filter has suddenly stopped working. Help!

    My liquify filter has suddenly stopped working. Any ideas?

    When I open liquify, it opens as usual and I can adjust the size of the image, choose the tool and attempt to edit the image , but it does not respond.  Nothing happens.

  • Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

    Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

    same question with PS11

  • My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit.

    My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit. I need help, does anyone know what to do?

    We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
    Mylenium

  • My end call button has suddenly stopped working

    I am using an iPhone 4 16GB Factory Unlocked.
    My end call button has suddenly stopped working. The icons at the bottom of the screen are also accessed randomly.
    i have tried everything recomended.
    Updated to the iOS to the latest version 4.3.5. Did a complete reset of the set. rebooted the set several times. But so far nothing seems to work.
    Any help would be highly appreciated.

    The Basic Troubleshooting Steps are...
    Restart...  Reset...  Restore from Backup...  Restore as New...
    If you have tried all these and are still having problems, make an appointment at your nearest Apple Store.
    http://www.apple.com/support/iphone/basics/
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • The multipoint-server shell has suddenly stopped working

    please help!
    hi every time i open the server i am greeted by this message:
    the multipoint-server shell has suddenly stopped working.
    the details are as follows:
    Problem Event Name     :              APPCRASH
                    Application Name            :              
    SRCShell.exe
                    Application Version         :               6.1.1600.5
                    Application Timestamp  :               4eb465b8
                    Fault Module Name        :               Station.dll
                    Fault Module Version    :               6.1.1600.5
                    Fault Module Time Stamp:           4eb465b5
                    Exception Code             :               c0000005
                    Exception Offset              :              
    0000000000053994
                    OS Version                          :              
    6.1.7601.2.1.0.16.56
                    Locale ID                             
    :               13321
                    Additional Information 1:             f4fb
                    Additional Information 2:             f4fbb3bbd4a03087da47c581553379
                    Additional Information 3:             Se3f
                    Additional Information 4:            
    Se3fd17c819664388032530a0fae66b
    what should I do? please help!!

    Hi,
    Please write your notebook product number (p/n), which system are you using and country of purchase.
    Resource:
    How to Locate the Notebook product number (p/n)
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    Create a new account (systempreferences -> accounts or Users & Groups on 10.7)  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

Maybe you are looking for

  • Exchange 2007 - ValidPorts key data keep reverting

    Randomly on my exchange server (Exchange 2007 SP3 with Rollup 14 on Server 2008 R2, fully patched), the validports registry value data revert from the data I entered to the "default" data. The "default" values I'm describing are machinename:ports and

  • How to include a template from a different directory

    Hi, I have a page navigation menu that I placed in a template file.  All the browsing files would then call this template file using cfinclude.  I now want to call this file from a different directory.  However, this causes all the url and image link

  • How to delete a row from AbstractTableModel

    my table is using an object to populate the data. static Object[][] data = new Object[LineCount()][5]; So when I delete a row, I should delete from the model or the object? Rgds

  • Regarding R12 JAN CPU Patch 7301300.

    R12 Jan CPU Note states that: Note: 738923.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Note (January 2009) _1.2.3 Oracle E-Business Suite Release 12 Patches:_ Oracle recommends customers uptake the Release 12 Critical Patch

  • AJAX call to PageFlow's actions and response

    Hi, in my portlet, I need to do ajax calls for some actions. This works fine but I have a problem with the response. I want to put in the response only a message to be shown to the user (for example "Update successful" or "Error !!"), but WebLogic Po